Difference between revisions of "NVGate Project manager"

NVGate Project manager (view source)

1,198 bytes removed , 10:40, 18 May 2020

8,877

edits

@@ Line 359: / Line 359: @@
 [[Image:Project_Manager_User_Pref2_56.png|framed|none]]
-=====New project=====
-This command opens the following dialog box. (select Project tab)
-[[Image:Project_Manager_User_Pref2_57.png|framed|none]]
-* '''Create new''': Launche the following dialog box and start a setup wizard according to the following choices:
-* '''On line''' Guide the user along the setup of an on-line & real-time analysis/recording. The inputs of the instruments will be proceed
-* '''Post-analysis''' Guide the user along the setup of a pos-processing analysis/recording. The recorded/imported raw data will be proceed
-[[Image:Project_Manager_User_Pref2_58.png|framed|none]]
-* '''Name: '''It is necessary to enter a name that is not already used in the project base. The name "Default project" is also not allowed.
-* '''Workbook'''
-* '''Default:''' All the analyzer settings are set to default and all the windows are closed. The project created will be completely empty.
-* '''Current:''' The new project is created using the current workbook settings. It is similar to the "Save As" command
-* '''Model:''' The new project is created using the settings of a model workbook. It is equivalent to creating the project from an empty workbook and then loading a specific workbook
 =====Remove project=====