Difference between revisions of "NVGate Mask And Alarm"

* Add a point [[Image:Reports_Tools_Ribbons_192.jpg]]: Switches to "Add point" mode. In this mode, a new point is created by clicking in the graph area.

* Select a point [[Image:Reports_Tools_Ribbons_193.png]]: Switches to "Select" mode. The point is selected by clicking on it. It can be moved by dragging and dropping it. The drop area is limited by the next and previous point X-coordinates, and Y minimum and maximum values. The two end points can be translated on the Y-axis only. Their X-coordinates are the X minimum and maximum values, respectively.

* Select all points [[Image:Reports_Tools_Ribbons_194.jpg]]: Selects all points of mask. The entire curve can be translated according to the Y-axis by moving one of its points.

* Remove selected point [[Image:Reports_Tools_Ribbons_195.jpg]]: Removes the selected point. The previous point becomes the new selected point.

* Generate min-max mask [[Image:Reports_Tools_Ribbons_196.jpg]]: Displays a dialog box used to generate a min-max mask from the mask edited, applying an offset ratio. The min-max mask is made up of two curves: from each point on the mask edited, two points with same X-coordinate are generated, applying the offset ratio negatively and positively on theY-coordinate.