8,877
edits
Difference between revisions of "NVGate Ribbons: Measurement Tab"
Jump to navigation
Jump to search
→Front-end group
| Line 62: | Line 62: | ||
[[File:front_end group.png]] | [[File:front_end group.png]] | ||
* | * [[Image:Reports_Tools_Ribbons_279.png]] Auto-range (CTRL<nowiki>+</nowiki>SHIFT<nowiki>+</nowiki>A). Controls and start the auto-ranging procedure. ''See Chapter 1 ASB § Front-end/Auto-range for details'' | ||
[[Image:Reports_Tools_Ribbons_279.png | |||
Auto-range (CTRL<nowiki>+</nowiki>SHIFT<nowiki>+</nowiki>A). Controls and start the auto-ranging procedure. ''See Chapter 1 ASB § Front-end/Auto-range for details'' | |||
*Record signal : Check this box to ensure the recording of all active inputs. This includes the DC inputs (parametric), the Ext Sync. and the CAN ones. | *Record signal : Check this box to ensure the recording of all active inputs. This includes the DC inputs (parametric), the Ext Sync. and the CAN ones. | ||
Unchecking this box just set the recorder to off. The inputs remain set in the recorder. This is helpful to temporarily pause the inputs recording; especially on setup fine tuning. | Unchecking this box just set the recorder to off. The inputs remain set in the recorder. This is helpful to temporarily pause the inputs recording; especially on setup fine tuning. | ||
* | * [[Image:Reports_Tools_Ribbons_281.png]] Bridge auto-zero: Balance the inputs connected through the Wheatstone bridge Xpod. ''See Chapter 1 ASB - § front-end/inputs settings for details.'' | ||
[[Image:Reports_Tools_Ribbons_281.png | |||
Bridge auto-zero: Balance the inputs connected through the Wheatstone bridge Xpod. ''See Chapter 1 ASB - § front-end/inputs settings for details.'' | |||
* | * [[File:Sampling.png]] Control/command the Front-end sampling high frequency and low frequency. | ||
[[File:Sampling.png]] | |||
Control/command the Front-end sampling high frequency and low frequency. | |||
Note: The plug-in analyzer and the recorder can reduce respective their bandwidths independently. This setting fixes the acquisition time accuracy and fixes the max signal bandwidth. | Note: The plug-in analyzer and the recorder can reduce respective their bandwidths independently. This setting fixes the acquisition time accuracy and fixes the max signal bandwidth. | ||