9,040
edits
Difference between revisions of "NVGate X-Pod: Temperature probe conditioner"
Jump to navigation
Jump to search
NVGate X-Pod: Temperature probe conditioner (view source)
Revision as of 12:43, 8 May 2020
, 12:43, 8 May 2020no edit summary
(Created page with "===X-Pod: Temperature probe conditioner=== Xpod_temp.png This Xpod handles thermocouples and RTD transducers. * '''PT100, PT1000 and J, K, T, N, E'''...") |
|||
| Line 1: | Line 1: | ||
===X-Pod: Temperature probe conditioner=== | ===X-Pod: Temperature probe conditioner=== | ||
==Expander modules== | |||
The XPod is a device that can be fixed on OR3X TW analyzer. Each XPod is associated to a block of 8 inputs. | |||
[[File:Xpod-plug.png|framed|none]] | |||
In the connected mode, when and XPod is present each corresponding input can be routed to: | |||
· The BNC input (Standard) | |||
· The XPod connector | |||
===General Xpod settings=== | |||
* '''Type''': For acquisition setup preparation, the XPod presence can be simulated in the office mode: | |||
One XPod type selector is available for each XPod position. | |||
[[File:xpod bridge.png|framed|none]] | |||
* '''Bridge max current''': Select the max excitation current for the corresponding active Bridge Xpod. Each bridge Xpod excitation current can be limited to 30 mA up to 4 V and 12 mA up to 10 V. | |||
* '''Bridge voltage''': Select the excitation voltage for the corresponding active Bridge Xpod. From 0 to 10 V. | |||
[[File:Xpod_temp.png|Xpod_temp.png]] | [[File:Xpod_temp.png|Xpod_temp.png]] | ||