9,121
edits
Difference between revisions of "NVGate Tachometer"
Jump to navigation
Jump to search
no edit summary
(Created page with "====Tachometer==== This module is used to set up several tachometer sources, including virtual tachometers in the case of multiple shafts. Tachometers are based on signals tha...") |
|||
| Line 1: | Line 1: | ||
The left button (''Select'') allows dispatching the different tachometer type to the plug-in analyzers. The others items open the corresponding event detection setup. | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_353.png|framed|none]] | |||
''Select:'' '' Shows the list of available tachometer sources and allows plugging it to the plug-in and waterfall. | |||
''See Chapter 1 ASB - § Connection wizard for details'' | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_354.png|framed|none]] | |||
''Inputs:'' '' Opens the properties dialog for the tachometers based on a dynamic input | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_355.png|framed|none]] | |||
''Ext. Synch:'' '' Opens the properties dialog for the tachometers based on a high speed oversampled Ext Synch input. | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_356.png|framed|none]] | |||
''Fractional:'' '' Opens the properties dialog for the tachometers that derives from another one. Fractional tach. computes RPM speed for a non accessible shaft by using gear ratio setting.'' ''Adapted for gear boxes and transmissions. | |||
Note: the fractional tach. cannot be settled from the ''Vision'' interface, use the ASB for it. | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_357.png|framed|none]] | |||
''Combined:'' '' Opens the properties dialog for the tachometers computed from other ones. Adapted for CVT. Note: the combined tach cannot be settled from the ''Vision'' interface, use the ASB for it. | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_358.png|framed|none]] | |||
''Profile:'' ''Set up the tachometer profiles duration. These graphs are available for the Tachometer module in the Add/Remove graph dialog. | |||
The profile displays continuously the tachometer speeds with a memory depth defined by the ''profile ''setting. | |||
* '' | |||
[[Image:Reports_Tools_Ribbons_359.png|framed|none]] | |||
''Resolution:'' ''Set up the tachometer profiles update rate. | |||
''See Chapter 1 ASB - § Resources/Tachometer for details'' | |||
====Tachometer==== | ====Tachometer==== | ||
This module is used to set up several tachometer sources, including virtual tachometers in the case of multiple shafts. Tachometers are based on signals that provide pulses/revolution or from a CAN bus or from a voltage proportional to the angular velocity. | This module is used to set up several tachometer sources, including virtual tachometers in the case of multiple shafts. Tachometers are based on signals that provide pulses/revolution or from a CAN bus or from a voltage proportional to the angular velocity. | ||