Difference between revisions of "NVGate Front End"

Jump to navigation Jump to search

NVGate Front End (view source)

Revision as of 12:16, 5 May 2020

1,622 bytes removed ,  12:16, 5 May 2020
→‎Outputs
Line 749: Line 749:
=====Outputs=====
=====Outputs=====
Contains all the settings related to the output x.
Contains all the settings related to the output x.
 
[[NVGate_Output_Signals#Output_chanel_settings|Read output page for details.]]
* '''Label''': the name of this Output (by default Output n, with 1 <nowiki><</nowiki>= n <nowiki><</nowiki>= 2). The label of each output is used in the result name and in all connection tools.
* '''Source''': the input signal of the output (NONE by default). The input signal can be any dynamic input of the Front-end (in the On-line mode) or any signal generated by the output signals resource (in the On-line mode) or any track of the Player (recorded from inputs).
* '''Applied ''''''filter''': the filter applied to this output. The list of filters applicable to the outputs is defined in the Filter module, by choosing Apply to= All.
* '''Clipping''': the amplitude limitation of the output signal (from 1 mV to 10 V).
* '''Gain''': This setting can be displayed in dB. It is the gain applied to the output signal.
* '''Impedance''':
 
{|border="2" cellspacing="0" cellpadding="4" width="77%" align="center"
|'''Impedance'''
|'''Description'''
 
|-
|GND
|The output is connected to the ground.
 
|-
|50 Ohms
|The output impedance is equal to 50 Ohms.
 
|-
|600 Ohms<ref>Only available for OR38 & OR36. For phone lines connections use.</ref>
|The output impedance is equal to 600 Ohms.
 
|}<br clear="all">
 
* '''Synchronization''':
 
{|border="2" cellspacing="0" cellpadding="4" width="92%" align="center"
|'''Synchronization'''
|'''Description'''
 
|-
|Free run
|The output delivers a signal as soon as there is a source connected.
 
|-
|Linked to run
|The output is activated only after the first run action.
 
|}<br clear="all">
 
* '''Transition control''': On / Off. If the value of this setting is "On" the ''Output settings/transition time'' is applied when this output is activated or disabled.


=====Aux. Output=====
=====Aux. Output=====
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/3624"

Navigation menu