8,877
edits
Difference between revisions of "NVGate D-Rec"
Jump to navigation
Jump to search
no edit summary
| Line 1: | Line 1: | ||
'D-rec' option turne your analyzer into a true stand-alone recorder | 'D-rec' option turne your analyzer into a true stand-alone recorder. You will be able to record raw signal data without PC. | ||
===D-REC, Recording without PC overview === | |||
'''Hardware compatible :''' OR35TW-OR36TW-OR38TW([[[[NVGate_OR10_Stand_alone|OR10 : Read Stand Alone page]]]])<br> | '''Hardware compatible :''' OR35TW-OR36TW-OR38TW([[[[NVGate_OR10_Stand_alone|OR10 : Read Stand Alone page]]]])<br> | ||
'''Licence :''' Optionnal, [https://www.oros.com/find-us/ contact your local distributor.] | '''Licence :''' Optionnal, [https://www.oros.com/find-us/ contact your local distributor.] | ||
| Line 13: | Line 13: | ||
* Signal recovery with NVGate, | * Signal recovery with NVGate, | ||
===Part-1: OPerating the recorder=== | |||
The D-rec control is made through the analyzer LCD panel. The described menus are available on analyzers sold or upgraded with the corresponding option. | The D-rec control is made through the analyzer LCD panel. The described menus are available on analyzers sold or upgraded with the corresponding option. | ||
| Line 32: | Line 32: | ||
The recorder support multiple records and sessions (Power On/Off). In case unexpected stop (Power failure or Mobi-Disk removal during a record) the interrupted records is automatically recovered at the next power on. | The recorder support multiple records and sessions (Power On/Off). In case unexpected stop (Power failure or Mobi-Disk removal during a record) the interrupted records is automatically recovered at the next power on. | ||
====D-rec menus Operations==== | |||
The front end and recorder setup allows to: | The front end and recorder setup allows to: | ||
| Line 43: | Line 43: | ||
* Exit the D-rec mode to start with NVGate or shutdown the analyzer. | * Exit the D-rec mode to start with NVGate or shutdown the analyzer. | ||
For D, E, and F, the inputs modification can be applied to a group of inputs. In the first menu set the inputs you want to change to Y (or set All to Y to modify all inputs simultaneously). Then set the coupling or range for example. It will apply to all the selected channels. | For D, E, and F, the inputs modification can be applied to a group of inputs. In the first menu set the inputs you want to change to Y (or set All to Y to modify all inputs simultaneously). Then set the coupling or range for example. It will apply to all the selected channels. | ||
===PART 2 -Preparing D-rec configurations with NVGate=== | |||
PART 2 -Preparing D-rec configurations with NVGate | |||
The analyzer memorize up to 12 different setups that can be loaded on site, without a PC. A D-rec configuration concerns the front-end and recorder setup only. The configuration can be created in 2 ways: Setup the front-end and the recorder or let D-rec do it automatically from an existing analysis workbook. | The analyzer memorize up to 12 different setups that can be loaded on site, without a PC. A D-rec configuration concerns the front-end and recorder setup only. The configuration can be created in 2 ways: Setup the front-end and the recorder or let D-rec do it automatically from an existing analysis workbook. | ||
| Line 96: | Line 90: | ||
When your analysis setup is ready, you can add it to the D-rec setup list (see below) with the "Setup\D-rec setup(s)…" menu entry. NVGate will activate the recorder with all the active inputs. You can go and make your measurements in confidence. | When your analysis setup is ready, you can add it to the D-rec setup list (see below) with the "Setup\D-rec setup(s)…" menu entry. NVGate will activate the recorder with all the active inputs. You can go and make your measurements in confidence. | ||
===PART 3 – recovering the SIgnal with NVGate=== | |||
The recorded signals are recovered with the NVGate project manager. To be accessible, the measurements must be associated to one project. Like the on-line records, the signal data can stay on the Mobi-Disk or be downloaded into the host PC hard-drive. | The recorded signals are recovered with the NVGate project manager. To be accessible, the measurements must be associated to one project. Like the on-line records, the signal data can stay on the Mobi-Disk or be downloaded into the host PC hard-drive. | ||
| Line 124: | Line 118: | ||
[[Image:Release_note_10.png|framed|none]] | [[Image:Release_note_10.png|framed|none]] | ||
===D-rec menus Organization chart=== | |||
[[Image:Release_note_05.png|framed|none]] | |||
''Note: Some sub-menus are not described in this diagram.'' | |||