Difference between revisions of "NVGate Project manager"

======Table of contents======

===Item definitions===

[[Image:Project_Manager_User_Pref2_14.png|framed|none]]

The project is the highest level of the organizational structure. It contains at least one workbook and can receive an unlimited number of measurements. The project has therefore two main aspects:

[[Image:Project_Manager_User_Pref2_15.png|framed|none]]

[[Image:Project_Manager_User_Pref2_16.png|framed|none]]

The workbook is designed to manage the analyzer and software setup. The table below gives the details of the functions managed by the workbook

[[Image:Project_Manager_User_Pref2_21.png|framed|none]]

[[Image:Project_Manager_User_Pref2_22.png|framed|none]]

The layout is the part of the workbook that contains the graphic windows. There is no limitation of number of layouts, but the workbook always has at least one layout.

* The selected tabulation of the control panel is related to the layout. This is designed to minimize the selection in the workspace.

[[Image:Project_Manager_User_Pref2_25.png|framed|none]]

This item appears when results template are added to the project. They can be added from the Tab "tools": Mask or from the "Add to result template" menu in a window.

[[Image:Project_Manager_User_Pref2_28.png|framed|none]]

[[Image:Project_Manager_User_Pref2_29.png|framed|none]]

This item is designed to store data. The data can be of two types:

The most important action that can be performed on a measurement is to load it to work in the measurement mode. This can be done from the pop-up menu associated with the item.

[[Image:Project_Manager_User_Pref2_30.png|framed|none]]

This item comes from the import of a result or a signal file.

The behavior of this item is similar to the behavior of a usual measurement item. It differs only in that the workbook associated with the measurement is empty. There is no information about the analyzer settings, or about the layouts and other workbook elements.

[[Image:Project_Manager_User_Pref2_31.png|framed|none]]

This item gathers all results of a measurement. The two main actions that can be performed from this item are:

[[Image:Project_Manager_User_Pref2_36.png|framed|none]]

[[Image:Project_Manager_User_Pref2_37.png|framed|none]]

This item represents a signal file generated by the recorder. Depending on the analysis, the item points to file located on the PC or the analyzer hard disk (see "Signal location" topic p 18).

* '''Model:''' The new project is created using the settings of a model workbook. It is equivalent to creating the project from an empty workbook and then loading a specific workbook

[[Image:Project_Manager_User_Pref2_07.png|framed|none]]

This command opens the following dialog box.