NVGate Ribbons: Data

Start

Start…: Opens the NVGate start dialog which is dedicated to make the first steps in the software. The NVGate start dialog is also displayed at each NVGate Start, except if the user checks the option Do not show again" in the dialog.

While launching NVGate or click on this button, operator is invited to select or create a project. This step allows reloading or defining the context.

Open Project

Selecting Open project opens the Open Project dialog which behaves as the single Item selection.

Select your project and click Open button.

New Project

Selecting New project opens the following dialog:

Fulfill the necessary properties and comment to describe the context of this project and click on OK button. This bring you to the setup selection.

Dataset

	Collate: Enable to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Share: Enable to copy or move Projects / Measurements / Models from the current Projects database to a specified target.
	Import: Import Signals and/or results files. See Export/import for details.

Projects

	Filter projects: Open the Filter projects dialog, which allows selecting the projects to be visible in the Project Manager.
	Edit measurement: Allow reviewing the measurements for comparison, modification or report. An edited measurement comes as a foreground layer on the top of the current analysis one.

Disk

PC and Mobi-Disc management tools

	Active Disk: Select the active disk. The active disk is the one which is mapped by the project manager. The disk where a signal file is located must be the active one in order to load it on the player (play back, post-process, exploration). The active disk can be: The PC one. Available in office mode only. One of the Mobi-disk connected through a USB cable. Available in office mode only. The Analyzer disk (Mobi-Disk or fixed). Available in connected mode only.
	Manage: Open the disk manager in order to manage the signal files saved on it. See "Disk management" topic from Chapter 3: "Hardware Management" for details.
	Format: Format the active disk. Not available when PC disk is selected. See "Disk management" topic from Chapter 3: "Hardware Management" for details. Warning: all saved data on the formatted disk will be definitely deleted.
	Download: Select available signal file on the active disk that match the project present on the project manager. To recover signal files from a record session made with another PC use the manage button. See "Disk management" topic from Chapter 3: "Hardware Management" for details.

OR10 setup

	Add current:
	List:

D-rec

This group manages D-rec (Direct recording) setups. D-rec allows recording signals with the analyzer without any PC or connection.

	New: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	List: Enables to copy or move Projects / Measurements / Models from the current Projects database to a specified target.

Read D-rec dedicated page for details.