NVGate Ribbons: Acquisition

Player group

This group is visible in Post-analysis mode.

	Connect tracks: This button allows dispatching the signal tracks (all types) to the analysis plug-ins.
	Record number: Define the record number (i.e. a section in the file defined during the acquisition) to be post-processed.
	Player settings: Give a direct access to the Player settings
	Playback mode: Allows choosing between a continuous and a step/step post-process. Continuous: the signal analyses are processed as fast as possible between the start and stop offset. Time step: the signal analyses are processed step by step. The step duration is defined by the Step setting (see hereafter). Each new step is manually (or automated by a macro) triggered through the Step setting (see hereafter).
	Step: Defines the time duration of the playback step for the "Time step" analysis mode. The player switches to "pause" every "time step" second.
	Pause/Cont.: Enables to perform the post-analysis up to the next step.

Transducers calibration

	Calibration: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Detect TEDS: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.

Virtual Inputs group

	Dynamic: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Parametric: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.

Tachometers group

	Select:Enables to copy or move Projects / Measurements / Models from the current Projects database to a specified target.
	Inputs:
	Ext. Sync:
	Fractional:
	Profile:
	Resolution:
	Combined:

Events group

	Associate to:
	Edge: Enables to copy or move Projects / Measurements / Models from the current Projects database to a specified target.
	Level:
	Periodic:
	RPM:
	Delta RPM:
	Combined:

Filters group

	Apply to: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	High/Low pass:
	Pass/Stop band:
	Integrator:
	Differentiator:

Outputs group

	Signals: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Sine:
	Multi-sine:
	Swept-sine:
	Chirp:
	Random noise:
	Output settings: