NVGate Ribbons: Home

Go to result group

	Start...: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Online to Post-analysis: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Select inputs: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Show results: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Results overview: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.

	Post-analysis to online: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Select signal: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Select tracks: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.

Note that another Run/Pause/Stop button is always available in the status bar (bottom left)

	Run: (CTRL+R) This button controls the general analysis and recording start. The plug-ins with connected channels/tracks will start their process once the run is activated. Note: The monitor and the Time Domain Analysis (in free run mode) process is continuous; it do not depends on the run status. Note: the trigger/start status of the plug-ins may block their process, waiting for an event."" Warning: Pressing the run button during an analysis leads to reset all current analyses, restarting all averages from 0. The analyzed data will be lost.
	Pause: Suspend or un-suspend the current analysis. Note: If the recorder is running, it starts / finishes a record.
	Stop: (CTRL+S) Stops all the current analyses and recording. After requesting a stop, the plug-ins finish their current block. When all the plug-ins have switched to Stop the analyzer switches to the Stopped status Note: The analyzed results and recorded signal are saved when the analyzer switch to stop. This is the default behavior. It may be changed from the user preferences.

	Save measurement: Save the result of the last measurement. This button is available when: There is at least one result selected in the save selection, The analyzer is stopped The results exists.
	Save option: Defines the way the result and signal are saved. It opens the Save setup dialog which contains 2 tabs.

	Load setup: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Save as model: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Active model: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Reset: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.

	Attachment: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.
	Filter projects: Enables to copy or move Projects / Measurements / Models from a specified source to the current Projects database.

	Record: Enter the preferences setting at the 1^st tab. It allows customizing the scales font size, the refreshing speed as well as default specialized modes.
	Used space: Enter the preferences setting at the 1^st tab. It allows customizing the scales font size, the refreshing speed as well as default specialized modes.
	Download: Enter the preferences setting at the 1^st tab. It allows customizing the scales font size, the refreshing speed as well as default specialized modes.