MultiPlane Balancing Install

How to install the multiplane balancing module

Download

Download here V2.57

Place the directory "Installation Files" on the PC where the software should be installed. It is recommended that the path to this location should not be too long.

Equipment required for the installation

USB drive containing Balancing software installation setup “Setup.exe”.

NVGate software must have been installed first.

Installation of NVGate software

First you need to install NVGate.

Installation of MultiPlane Balancing software

Run " Setup.exe" program from the USB drive, and the following window is displayed:

Click on “OK”, and the following window is displayed:

Select the installation directory, and the default location is: C:\Program Files (x86)\OROS\NVSolutions\Multiplane.

Click on the computer icon, and the following window is displayed:

Select the location of the shortcut in the Windows Start menu, and then click on “Continue” to start the installation, and wait until the following window is displayed:

Click on “OK” to exit the setup wizard, and OROS Multiplane Balancing software is successfully installed.

NOTE: Before launching the software, please plug OROS USB dongle if your license is dongle locked, or connect the PC to the analyzer and launch NVGate in the connected mode if your license is instrument locked.