NVGate Tools: EditSignal
Introduction
Package composition installation
Download : Here
- NVGate add-on tool "Edit Signal": EditSignal.exe
- It is advised to put the Add on tool within the NVGate Link Directory "C:\OROS\NVGate data\Links"
Edit Signal Overview
The "Edit Signal" allows to edit part of time signal. It does not affect the initial signal file data, and creates a new file according to the requested modification.
Edit signal should be done according to this step by step procedure:
1- Load and preview signal, only the signal window should be opened
2- Start the "Edit Signal" Add on, from Link
3- Select a mode from Edit Signal
- Zero : Remove all data, set to "zero" for selected part of current track
- Zero All : Remove all data, set to "zero" for selected part of all tracks
- Mean : Interpolate data form selected part of current track
- Cut all : Remove a selected part for all tracks
4- Apply "Free Marker"
5- Compute new Signal
It is possible to affect several part of signal with loop on steps "3-4" before computing new signal.
How To Use
Step by step overview
Edit signal should be done according to the step by step procedure :
1- Load and preview signal, only the signal window should be opened :
2- Start the "Edit Signal" Add on, from Link toolbar :
3- Select mode from Edit Signal :
4- Apply "Free Marker" to select area to "cut" :
5- "Generate Signal"
A new file is generated within the same project as the original signal file. For example, signal file "FRF200_3_out" has been created after cutting selected part of signal "FRF200_3"
Edit Signal Options
"Zero"
Remove all data : set to "zero" for selected part of current track
"Zero All"
Remove all data: set to "zero" for selected part of all tracks
"Mean"
Interpolate data for selected part of current track
This option is useful for track with DC component
"Cut all"
Remove a selected part for all tracks
Features
Current Edit Signal" tool has the following features:
- All tracks within the signal file must be according to same sampling rate
- This tool can not manage Ext-Sync tracks
- Size of edit file depends on available RAM of the PC