Difference between revisions of "NVGate 2022: Release note"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
=== RPM buttons create automatic events=== | === RPM buttons create automatic events=== | ||
== New settings by default== | == New settings by default== | ||
FFT Overlap: 66% | |||
FFT lines: 3200 | |||
FFT Overall low freq : 2 Hz | |||
SOA resolution: 1/8 | |||
SOA overlap: 5 | |||
SOA OVL lower order: 0.2 | |||
Event Delta RPM: Delta velocity 10 rpm | |||
Waterfall Depth: 1000 | |||
Tachometer/RPM Profiles/ duration: 120 sec | |||
==NVGate reader== | ==NVGate reader== | ||
Revision as of 14:25, 7 December 2021
NVGate 2022
Ergonomics
Tab: new icone disposition
Go to results: new one click icones
RPM buttons create automatic events
New settings by default
FFT Overlap: 66%
FFT lines: 3200
FFT Overall low freq : 2 Hz
SOA resolution: 1/8
SOA overlap: 5
SOA OVL lower order: 0.2
Event Delta RPM: Delta velocity 10 rpm
Waterfall Depth: 1000
Tachometer/RPM Profiles/ duration: 120 sec
NVGate reader
Use NVGate in reeader mode : no need usb dongle or hardware.
Fractionnal tach : ration over 100
Up to 3 real time: plug in SOA
Add on : PV (pressure volume) diagram
How to use :
- Define one (or more) channel as a pressure.
- Add this channel into Sync. order (SOA) plug in.
- On SOA plug in , average, domain, select: "Angular"
- Open PV_Diagram.exe
- Click on refresh (right click) in available results if you do not see anything.
- Select the input.
- Compute once will display the PV diagram base once based the last triggerd block.
- "background computation, will continuously compute the diagram.