Difference between revisions of "Repair record"
Jump to navigation
Jump to search
(Created page with "This is development tools. Ask OROS before using it. * First do a copy of the signal that you want to recover . Put it in another directory, than the project base of NVGate...") |
|||
| Line 3: | Line 3: | ||
* First do a copy of the signal that you want to recover . Put it in another directory, than the project base of NVGate. (this is important using the tools can delete all the signal on a folder…) | * First do a copy of the signal that you want to recover . Put it in another directory, than the project base of NVGate. (this is important using the tools can delete all the signal on a folder…) | ||
* Extract the file attached with this mail, rename the .txt by a .exe | |||
* Launch dos prompt. | |||
* Put the command line with the .exe then the folder of the NVGate project that you want to recover . | |||
Exemple : C:\RepairRecord\RepairRecord.exe "C:\Nouveau\section" | Exemple : C:\RepairRecord\RepairRecord.exe "C:\Nouveau\section" | ||
(See dos picture attached) | (See dos picture attached) | ||
* The software is scanning all the signal in the folder and try to recover it, if he can’t recover the signal, the signal can be delete…. | |||
* Now you can import the signal in NVGate. | |||
* I recommend to re-record the signal with NVGate, (from player to recorder) then I recommend to be careful about the end of the signal, on the signal that you have send to me the end has not been recover properly. By re-recording the signal, you can delete the end. | |||
Revision as of 09:45, 1 December 2020
This is development tools. Ask OROS before using it.
- First do a copy of the signal that you want to recover . Put it in another directory, than the project base of NVGate. (this is important using the tools can delete all the signal on a folder…)
- Extract the file attached with this mail, rename the .txt by a .exe
- Launch dos prompt.
- Put the command line with the .exe then the folder of the NVGate project that you want to recover .
Exemple : C:\RepairRecord\RepairRecord.exe "C:\Nouveau\section" (See dos picture attached)
- The software is scanning all the signal in the folder and try to recover it, if he can’t recover the signal, the signal can be delete….
- Now you can import the signal in NVGate.
- I recommend to re-record the signal with NVGate, (from player to recorder) then I recommend to be careful about the end of the signal, on the signal that you have send to me the end has not been recover properly. By re-recording the signal, you can delete the end.