Difference between revisions of "NVGate X-Pod: Temperature probe conditioner"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
This Xpod handles [https://en.wikipedia.org/wiki/Thermocouple thermocouples] and [https://en.wikipedia.org/wiki/Resistance_thermometer RTD transducers]. | This Xpod handles [https://en.wikipedia.org/wiki/Thermocouple thermocouples] and [https://en.wikipedia.org/wiki/Resistance_thermometer RTD transducers]. | ||
* '''PT100, PT1000 and J, K, T, N, E''' | * '''PT100, PT1000 and J, K, T, N, E''' | ||
| Line 34: | Line 34: | ||
* Automatic '''cold junction compensation''' | * Automatic '''cold junction compensation''' | ||
* Standard fl at pin '''connectors''' | * Standard fl at pin '''connectors''' | ||
[[Image:front_end_08.png|framed|none]] | |||
Revision as of 12:48, 8 May 2020
This Xpod handles thermocouples and RTD transducers.
- PT100, PT1000 and J, K, T, N, E
- Integrated linearization
- Automatic cold junction compensation
- Standard fl at pin connectors
Expander modules
The XPod is a device that can be fixed on OR3X TW analyzer. Each XPod is associated to a block of 8 inputs.
In the connected mode, when and XPod is present each corresponding input can be routed to:
· The BNC input (Standard)
· The XPod connector
General Xpod settings
- Type: For acquisition setup preparation, the XPod presence can be simulated in the office mode:
One XPod type selector is available for each XPod position.
- Cold Compensation: Enable or disable the internal cold junction compensation for the corresponding active Temperature Xpod. This setting enables the compensation of the connectors metal junction thermocouple voltage at the Xpod side. It uses the Xpod internal temperature measurement (2 locations/Xpod) to correct the measured temperatures.
Temperature
This Xpod handles thermocouples and RTD transducers.
- PT100, PT1000 and J, K, T, N, E
- Integrated linearization
- Automatic cold junction compensation
- Standard fl at pin connectors
