Difference between revisions of "NVGate 2022: Release note"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
=== RPM buttons create automatic events=== | === RPM buttons create automatic events=== | ||
== New settings by default== | == New settings by default== | ||
The settings by default in NVGate have been update to the one below. With this default seetings, you can do rotating analysis measurement directly.. | |||
Be aware than if you load an exiting project , this is NOT affected you previous settings are keep. You can also easily change this settings. | |||
FFT Overlap: 66% | FFT Overlap: 66% | ||
Revision as of 14:27, 7 December 2021
NVGate 2022
Ergonomics
Tab: new icone disposition
Go to results: new one click icones
RPM buttons create automatic events
New settings by default
The settings by default in NVGate have been update to the one below. With this default seetings, you can do rotating analysis measurement directly.. Be aware than if you load an exiting project , this is NOT affected you previous settings are keep. You can also easily change this settings.
FFT Overlap: 66%
FFT lines: 3200
FFT Overall low freq : 2 Hz
SOA resolution: 1/8
SOA overlap: 5
SOA OVL lower order: 0.2
Event Delta RPM: Delta velocity 10 rpm
Waterfall Depth: 1000
Tachometer/RPM Profiles/ duration: 120 sec
NVGate reader
Use NVGate in reeader mode : no need usb dongle or hardware.
Fractionnal tach : ration over 100
Up to 3 real time: plug in SOA
Add on : PV (pressure volume) diagram
How to use :
- Define one (or more) channel as a pressure.
- Add this channel into Sync. order (SOA) plug in.
- On SOA plug in , average, domain, select: "Angular"
- Open PV_Diagram.exe
- Click on refresh (right click) in available results if you do not see anything.
- Select the input.
- Compute once will display the PV diagram base once based the last triggerd block.
- "background computation, will continuously compute the diagram.