NVGate 2021: Release note

OROS always strives to be closer to its users and is carefully listening to needs and requests. This is why OROS is regularly releasing new version. Customers under contract automatically benefit from each release.

The NVGate® 2021 mlajor version is available from january 2021. This release of the OROS 3-Series analyzer’s software platform brings additional functionalities and brings significative performance improvements.

This release note describes the content of version 12.00, with operating details.

Compatibility: NVGate V12.00 is compatible with all OROS instruments that have not been discontinued. Depending on the hardware options and version, some instrument features may or may not be available.

DC simulated

The DC simulated allow you to inject up to 32 external DC channels in NVGate from external source (exemple : GPS, weather station, external can bus...). The frequency sampling is up to 15 sample / seconds. Thanks to the python developer toolkit, a developer can easily develop an interface to inject the value inside NVGate. The GPS and weather station below have been develop using the DC simulated.

This option is include with the reference ORNV-VI-DC (wich also include the Virtual input).

How to use:

on acquisiton Tab, select connect input, select the DC inputs and select the DC simulated channels.

This channels can be activate and be put inside recorder and/or waterfall like any other DC channels.

The settings Value (wich can be controlled by an external software) will change the value of the inputs.

The others DC simulated settings details are explain on the front end settings page.

GPS

compatibility :

Android phone

Navilock NL-602U

Weather station

• manuel
• comaptibility davisinstruments weather station :

(need the 3 elements)

- 6322OV Wireless Vantage Pro2 Integrated Sensor Suite

- 6316 Wireless Envoy

- 6510USB WeatherLink Data Logger

miscelisnious

DC Dynamical sensor y = ax+b calibration

It is now possible to calibrate a sensor on a dynamical input with the formula "y = ax + b".

For using it, first create the sensor on the sensor database. Apply a DC coulping on it.

Now on the calibration part, you can calibrate it using 2 values. Then the software will automatically and apply the sensitivity and offset.

Add on : Human body vibration

Add on : filter time signal with Wk, Wd, Wh ponderation https://wiki.oros.com/wiki/index.php/Human_Vibration

Orbit display include on FFT diag or ORD diag

Orbit display