Difference between revisions of "NVGate X-Pod: Temperature probe conditioner"
Jump to navigation
Jump to search
| Line 24: | Line 24: | ||
[[File:Xpod_temp.png|Xpod_temp.png]] | [[File:Xpod_temp.png|Xpod_temp.png]] | ||
This Xpod handles thermocouples and RTD transducers. | |||
===Temperature=== | |||
This Xpod handles [https://en.wikipedia.org/wiki/Thermocouple thermocouples] and [https://en.wikipedia.org/wiki/Resistance_thermometer RTD transducers]. | |||
* '''PT100, PT1000 and J, K, T, N, E''' | * '''PT100, PT1000 and J, K, T, N, E''' | ||
Revision as of 12:46, 8 May 2020
X-Pod: Temperature probe conditioner
Expander modules
The XPod is a device that can be fixed on OR3X TW analyzer. Each XPod is associated to a block of 8 inputs.
In the connected mode, when and XPod is present each corresponding input can be routed to:
· The BNC input (Standard)
· The XPod connector
General Xpod settings
- Type: For acquisition setup preparation, the XPod presence can be simulated in the office mode:
One XPod type selector is available for each XPod position.
- Bridge max current: Select the max excitation current for the corresponding active Bridge Xpod. Each bridge Xpod excitation current can be limited to 30 mA up to 4 V and 12 mA up to 10 V.
- Bridge voltage: Select the excitation voltage for the corresponding active Bridge Xpod. From 0 to 10 V.
Temperature
This Xpod handles thermocouples and RTD transducers.
- PT100, PT1000 and J, K, T, N, E
- Integrated linearization
- Automatic cold junction compensation
- Standard fl at pin connectors
