Difference between revisions of "NVGate X-Pod: Temperature probe conditioner"

Revision as of 12:43, 8 May 2020

The XPod is a device that can be fixed on OR3X TW analyzer. Each XPod is associated to a block of 8 inputs.

In the connected mode, when and XPod is present each corresponding input can be routed to:

· The BNC input (Standard)

· The XPod connector

Type: For acquisition setup preparation, the XPod presence can be simulated in the office mode:

One XPod type selector is available for each XPod position.

Bridge max current: Select the max excitation current for the corresponding active Bridge Xpod. Each bridge Xpod excitation current can be limited to 30 mA up to 4 V and 12 mA up to 10 V.
Bridge voltage: Select the excitation voltage for the corresponding active Bridge Xpod. From 0 to 10 V.

This Xpod handles thermocouples and RTD transducers.

@@ Line 1: / Line 1: @@
 ===X-Pod: Temperature probe conditioner===
+==Expander modules==
+The XPod is a device that can be fixed on OR3X TW analyzer. Each XPod is associated to a block of 8 inputs.
+[[File:Xpod-plug.png|framed|none]]
+In the connected mode, when and XPod is present each corresponding input can be routed to:
+· The BNC input (Standard)
+· The XPod connector
+===General Xpod settings===
+* '''Type''': For acquisition setup preparation, the XPod presence can be simulated in the office mode:
+One XPod type selector is available for each XPod position.
+[[File:xpod bridge.png|framed|none]]
+* '''Bridge max current''': Select the max excitation current for the corresponding active Bridge Xpod. Each bridge Xpod excitation current can be limited to 30 mA up to 4 V and 12 mA up to 10 V.
+* '''Bridge voltage''': Select the excitation voltage for the corresponding active Bridge Xpod. From 0 to 10 V.
 [[File:Xpod_temp.png|Xpod_temp.png]]