Difference between revisions of "Balancing Manual"
| Line 12: | Line 12: | ||
[[File:disable.jpg]] | [[File:disable.jpg]] | ||
==Correction weight from a | ==Correction weight from a database== | ||
Basically the software provide a couple of balancing masses at two consecutive position, giving the right resulting correction vector. <br> | |||
First User has to | On the field, it is not always possible to build the exact masses. | ||
Balancing software can take into account the actual weights to recommend the best distribution that will apply the right correction vector. <br> | |||
First, User has to register any weight in a database so that the software can take them for the computation. | |||
[[File:weight_database.jpg]] | [[File:weight_database.jpg]] | ||
==Set max allowed weight | ==Set max allowed weight per position== | ||
It is also possible to set a max allowed weight per position. <br> | It is also possible to set a max allowed weight per position. <br> | ||
Revision as of 15:52, 19 December 2023
Balancing 2023 : What's new?
Balancing software is continuously improved to take into account the restraint of the field such as the impossibility to install a weight on the rotor, or use the own weights or comply some balancing custom rules.
Disable some rotor positions
On the field, there are many reasons that may lead to not allow the mounting of correction masses.
Indeed, a mechanical obstruction such as a welded weight may lead impossible adding or removing mass at some rotor positions.
The computed balancing masses given by the software must take into account this fact.
As shown below, rotor positions can be disabled in the correction prognosis in the software.
Correction weight from a database
Basically the software provide a couple of balancing masses at two consecutive position, giving the right resulting correction vector.
On the field, it is not always possible to build the exact masses.
Balancing software can take into account the actual weights to recommend the best distribution that will apply the right correction vector.
First, User has to register any weight in a database so that the software can take them for the computation.
Set max allowed weight per position
It is also possible to set a max allowed weight per position.
Indeed, some rules are usually followed to ensure mechanical rotor integrity.
The correction calculation will take into account this limitation.
Installation guide
Equipment required for the installation
• Before proceeding to the Balancing installation, NVGate should be installed (Refer to NVGate User’s Manual).
• Software CD or USB stick containing OROS Balancing and the online help.
• A dongle dedicated to OROS Balancing software in case of floating license.
| Header text | Headceerrext | Header text |
|---|---|---|
| Example | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
Software licensing
LICENSE on instrument: ORNVS-BAL-I
If you are using an instrument-locked license, the OROS hardware (OROS 3-Series analyzers) is used to allow the software operation. Your selected OROS analyzer should be connected when using the balancing solution. To update the license, use the delivered USB stick to update your hardware key. For details about this procedure, refer to your Analyzer installation guide from the OROS wiki web page.
FLOATING LICENSE: ORNVS-BAL-FD If you are using a floating license, you should plug your USB balancing dongle when using the software (online or offline). The floating license will allow you to use your balancing software on any of your analyzers. For the floating license, an updating of your hardware keys may be required. If it is the case, use the delivered USB stick to update your hardware key. For details about this procedure, refer to your Analyzer installation guide from the OROS wiki web page.