Difference between revisions of "NVGate DSP computation SPU"
| Line 1: | Line 1: | ||
= Force DSP= | |||
For force DSP (and also for normal DSP...), the number of SPU change according to the max sampling frequency. | |||
{| class="wikitable" | |||
|- | |||
! Header text !! Header text !! Header text !! Header text !! Header text !! Header text !! Header text !! Header text !! Header text !! Header text | |||
|- | |||
| Example || Example || Example || Example || Example || Example || Example || Example || Example || Example | |||
|- | |||
| Example || Example || Example || Example || Example || Example || Example || Example || Example || Example | |||
|} | |||
= Normal DSP= | = Normal DSP= | ||
SPU computation for normal DSP : OR34 V1 - Or35V1 - OR36V1 OR36V22 (normal DSP) - OR38V1 - OR38V2 (Normal DSP). | SPU computation for normal DSP : OR34 V1 - Or35V1 - OR36V1 OR36V22 (normal DSP) - OR38V1 - OR38V2 (Normal DSP). | ||
| Line 379: | Line 394: | ||
The overall acoustic levels analysis requires 1 SPU per channel at 20 kHz bandwidth. The number of required SPUs is directly proportional to the analysis bandwidth (i.e. the sampling frequency divided by 2.56). | The overall acoustic levels analysis requires 1 SPU per channel at 20 kHz bandwidth. The number of required SPUs is directly proportional to the analysis bandwidth (i.e. the sampling frequency divided by 2.56). | ||
Revision as of 15:00, 15 February 2022
Force DSP
For force DSP (and also for normal DSP...), the number of SPU change according to the max sampling frequency.
| Header text | Header text | Header text | Header text | Header text | Header text | Header text | Header text | Header text | Header text |
|---|---|---|---|---|---|---|---|---|---|
| Example | Example | Example | Example | Example | Example | Example | Example | Example | Example |
| Example | Example | Example | Example | Example | Example | Example | Example | Example | Example |
Normal DSP
SPU computation for normal DSP : OR34 V1 - Or35V1 - OR36V1 OR36V22 (normal DSP) - OR38V1 - OR38V2 (Normal DSP).
Because of the linearity of the computation, we simplify by saying: 1DSP = 12 SPU. This allow a simplification for SPU computation. So we can deduce:
FFT
Computation SPUs:
| Bandwidth | Fdec | Resolution | Envelope | Zoom | SPU/Channel for Real-time |
SPU/Channel for non Real-time |
| 20k | 1 | 401 | No | No | 1 | 0,5 |
| 10k | 1 | 401 | No | No | 0,5 | 0,25 |
| Nk | 1 | 401 | No | No | =N/20 | =N/40 |
| 10k | 2 | 401 | No | No | 1 | 1 |
| 5k | 4 | 401 | No | No | 0,8 | 0,6 |
| 2k | 10 | 401 | No | No | 0,6 | 0,6 |
| 1k | 20 | 401 | No | No | 0,5 | 0,6 |
| Lower than 1k |
Higher than 20 |
401 | No | No | 0,5 | 0,5 |
| 20k | 1 | 401 and below |
No | No | 1 | 0,5 |
| 20k | 1 | 801 | No | No | 1,25 | 0,5 |
| 20k | 1 | 1601 | No | No | 1,5 | 0,5 |
| 20k | 1 | 3201 | No | No | 2 | 0,5 |
| 20k | 1 | 6401 | No | No | 3 | 0,5 |
| 20k | 1 | 401 | No | No | 1 | 0,5 |
| 20k | 1 | 401 | No | Yes | 2 | 1,5 |
| 20k | 1 | 401 | No | No | 1 | 0,5 |
| 20k | 1 | 401 | Yes | Yes | 3 | 3 |
SOA
Computation SPUs:
| Bandwidth (Hz) | Decimation factor | Resolution | SPU/Channel |
| 20 k | 1 | 401 | 3 |
| 10 k | 1 | 401 | 1,5 |
| N k | 1 | 401 | =(N*3)/20 |
| 10 k | 2 | 401 | 2 |
| 5 k | 4 | 401 | 1,3 |
| 2,5 k | 8 | 401 | 1,1 |
| 1,25 k | 16 | 401 | 0,9 |
| 625 | 32 | 401 | 0,8 |
| 313 | 64 | 401 | 0,7 |
| 156 | 128 | 401 | 0,6 |
| 78 | 256 | 401 | 0,6 |
| 20 k | 1 | 401 and below | 3 |
| 20 k | 1 | 801 | 3,25 |
Sampling Frequency: set in Front-End/Inputs settings/Input sampling
FFT Bandwidth: set in FFTx/FFT analysis/range
==
Octave:
| Bandwidth | Fdec | Reso | SPU/Channel for Real-time |
| 25.6k | 1 | 1/3rd | 4 |
| 20k | 1 | 1/3rd | 3 |
| 12.8k | 1 | 1/3rd | 2 |
| 10k | 1 | 1/3rd | 1,5 |
| 20k | 1 | 1/3rd | 3,0 |
| 10k | 2 | 1/3rd | 2,0 |
| 5k | 4 | 1/3rd | 1,25 |
| 20k | 1 | 1/1 | 1,5 |
| 20k | 1 | 1/3rd | 3 |
| 20k | 1 | 1/12th | 6 |
| 20k | 1 | 1/24th | 12 |
Sampling Frequency: set in Front-End/Inputs settings/Input sampling
1/N Oct Bandwidth: set in OCT/FFT analysis/range
OVA
| Bandwidth | SPU/Channel for Real-time |
| 25,6k | 1,25 |
| 20k | 1 |
| 12,8k | 0,75 |
| 10k | 0,5 |
The overall acoustic levels analysis requires 1 SPU per channel at 20 kHz bandwidth. The number of required SPUs is directly proportional to the analysis bandwidth (i.e. the sampling frequency divided by 2.56).