Difference between revisions of "Sound Power Install"

From OROS Wiki
Jump to navigation Jump to search
 
(19 intermediate revisions by 4 users not shown)
Line 4: Line 4:
This "'''INSTALLATION GUIDE"''' will guide you through the installation of the Sound Power software and help you run it for the first time. It will explain in particular the way the installation should be done in parallel to NVGATE<sup>®</sup> and to the Instrument Hardware.
This "'''INSTALLATION GUIDE"''' will guide you through the installation of the Sound Power software and help you run it for the first time. It will explain in particular the way the installation should be done in parallel to NVGATE<sup>®</sup> and to the Instrument Hardware.


==First check==
==First Check==
====Recommended PC configuration====
====Recommended PC configuration====


See [[PC Requirement]] page
See [[PC Requirement]] page.


====Equipment required for the installation====
====Equipment required for the installation====
OROS Sound Power V3.10.1 february 2020: https://orossas.sharepoint.com/:u:/g/support/EWgD6QwOyCxMoyBPOgW3PhwBCkV79kCfJvjVkC98sY-80g?e=bddyGG
* donwload the last version on [https://my.oros.com/categories/software/sound-power/ www.myoros.com]


A dongle with NVGate and OROS Sound Power authorized
* A NVGate dongle that is OROS Sound Power authorized.


==Installation==
==Installation==
===Installation of the NVGate software===
===Installation of the NVGate software===
'''NVGate'''<sup>'''</sup> ''''''must be installed''' on the PC before starting the installation of Sound Power.
[[NVGate_Installation_and_Connection|'''NVGate'''<sup>'''</sup> ''' '''must be installed''']] properly on the PC before starting the installation of Sound Power.
 
To install NVGate<sup></sup>, please refer to the "'''''OR3X/NVGate Installation Guide'''''".
 
Before starting the installation of Sound Power, make sure that NVGate is properly installed.


===Installation of the Sound Power Solution===
===Installation of the Sound Power Solution===
Ensure NVGate<sup></sup> is installed and running on the PC before starting the installation of Sound Power.
Ensure NVGate<sup></sup> is installed and running on the PC before starting the installation of Sound Power.


The procedure of installation of Sound Power is the same for Windows 98, 2000 and XP.
Run the "setup.exe" program, and the following window is displayed:
 
For information, the following screenshots have been realized under Windows XP.
 
Insert the CD in the appropriate drive and wait for the Autorun program (or run the "setup.exe" program from the CD)
 
Wait until the following window is displayed:
 
[[Image:SOUND_POWER_04.png|framed|none]]
 
Click on "Next <nowiki>></nowiki>".
 
The following window is displayed:
 
[[Image:SOUND_POWER_05.png|framed|none]]
 
Read the terms of the license agreement and select "I accept the terms in the license agreement" if you agree.
 
Click on "Next <nowiki>></nowiki>".
 
The following window is displayed:
 
[[Image:SOUND_POWER_06.png|framed|none]]
 
Enter the user name, the organization and choose to install the application for all users or only for you.
 
Click on "Next <nowiki>></nowiki>".
 
The following window is displayed:
 
[[Image:SOUND_POWER_07.png|framed|none]]
 
Select the location of the "Sound Power" folder. By default, OROS Sound Power is installed in:
 
C:\Program Files\OROS\NVSolutions\SoundPower.
 
Installing Sound Power in the NVGate<sup></sup> directory (as it is by default) enables links between the Sound Power Online Help and the NVGate<sup></sup> Online Help.
 
Click on "Next <nowiki>></nowiki>".
 
The following window is displayed:
 
[[Image:SOUND_POWER_08.png|framed|none]]
 
Choose the setup type. It is recommended to select "Complete".


Click on "Next <nowiki>></nowiki>".
[[Image:SP install 1.png|border|none|500px]]


The following window is displayed:
Click on "Next <nowiki>></nowiki>", and the following window is displayed:


[[Image:SOUND_POWER_09.png|framed|none]]
[[Image:SP install 2.png|border|none|500px]]


Click on "Install" to begin the installation.
Select the installation directory. It is highly recommended to keep the default location: C:\OROS\Programs\Sound Power. Installing Sound Power in the NVGate directory (as it is by default) enables links between the Sound Power Online Help and the NVGate<sup></sup> Online Help.


Wait until the following window is displayed:
Click on “Install” to begin the installation, and wait until the following window is displayed:


[[Image:SOUND_POWER_10.png|framed|none]]
[[File:image_2021-05-10_113928.png|500px]]


Click on "Finish".
Click on “Finish”, and the following window is displayed:


The following window is displayed:
[[Image:SP install 3.png|border|none|500px]]


[[Image:SOUND_POWER_11.png|framed|none]]
Indicate the location of NVGate.


If NVGate is installed on the same PC:
If NVGate is installed on the same PC:


Choose "Local" and indicate the path for "NVGate.exe". By default, it is: "C:\ProgramFiles\OROS\OR3X".
* Choose "Local" and indicate the path for "NVGate.exe". By default, it is: "C:\OROS\Programs\NVGate\NVGate.exe".


If you are using NVGate from another PC:
If you are using NVGate from another PC:


Choose "Remote" and indicate the IP address of this second PC.
* Choose "Remote" and indicate the IP address of this second PC.


If you want to change the Sound Power configuration:
If later you want to change the Sound Power configuration:


Open the "Start" menu, select "Programs", then "NVSolutions" and choose "Sound Power Configuration".
* Launch SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power".


<u>At this stage</u>:
<u>At this stage</u>:


Plug the '''Dongle''' to use Sound Power in the '''Office Mode'''
Plug in the '''Dongle''' to use Sound Power in '''Office Mode'''


Plug the '''Hardware''' to use Sound Power in the '''Connected Mode'''.
Plug in the '''Hardware''' to use Sound Power in the '''Connected Mode'''.


And then, run "Sound Power".
And then, run "Sound Power".
Line 113: Line 62:
The following window is displayed:
The following window is displayed:


[[Image:SOUND_POWER_12.png|framed|none]]
[[Image:SP start.png|border|none|500px]]


You can either create a new setup by choosing the Standard, the Surface type and the number of positions of your experiment or load a setup already created.
You can create a new setup by choosing the Standard, the Surface type and the Number of positions of your experiment or you can load a setup that is already created.


Click on "OK".
Click on "OK".
Line 121: Line 70:
If NVGate has not been started previously, the following window is first displayed:
If NVGate has not been started previously, the following window is first displayed:


[[Image:SOUND_POWER_13.png|framed|none]]
[[Image:SP operator manager.png|border|none|300px]]


Enter the first name and last name of the user and choose to set a password or not.
Choose to start as operator or manager using a password.


<u>''Notice''</u>'': The access level for the first user is necessary full.''
<u>''Notice''</u>'': The access level for the first user has to be "full".''


Then, the following window is displayed:
Then, the following window is displayed:


[[Image:SOUND_POWER_14.png|framed|none]]
[[Image:SP NVGate connection window.png|border|none|500px]]


If NVGate has already been started by itself before the selection of the running mode will be asked directly. Choose to start Sound Power in Connected to the hardware or in the office mode.
Choose to start Sound Power in "Connection to hardware" or in "Office mode".


===Updating the Software version===
===Updating the Software version===
'''Uninstall the previous version of Sound Power''' installed on the PC:<br>Insert the CD in the appropriate driver and wait for the Autorun program (or run the "setup.exe" program from the CD).<br>The following window is displayed:
'''Uninstall the previous version of Sound Power''' installed on the PC. Then '''Start the installation of the new version'''.<br>Please follow the procedure described above.
 
[[Image:SOUND_POWER_15.png|framed|none]]
 
'''Click''' on "Next <nowiki>></nowiki>".
 
The following window is displayed:
 
[[Image:SOUND_POWER_16.png|framed|none]]
 
Choose to remove the current version.
 
Click on "Next <nowiki>></nowiki>".
 
The following window is displayed:
 
[[Image:SOUND_POWER_17.png|framed|none]]
 
Confirm by clicking on "Remove".
 
Wait until the following window is displayed:
 
[[Image:SOUND_POWER_18.png|framed|none]]
 
Click on Finish
 
1. '''Start the installation of the new version'''.<br>Please follow the procedure described from the chapter"Installation of the Sound Power Solution".


----
----
Line 166: Line 89:
===Troubleshooting===
===Troubleshooting===


{|cellspacing="0" cellpadding = "10" style="border-style:solid; border-color:black; border-width:1px;" width="100%"
|
----


''Sound Power may not start.''
''Sound Power may not start. In this case, one of the following error messages is returned:''


|-
|''In this case, one of the following error messages is returned:''
|}


'''« File Sound Power.ini not found ! »'''
'''« File Sound Power.ini not found ! »'''


{|border="0" cellspacing="2" width="100%"
{|border="0" cellspacing="2" width="100%"
|''''''
 
|''Run the Sound Power configuration program (Menu "Start" <nowiki>></nowiki> "Programs" <nowiki>></nowiki>  "NVSolutions" <nowiki>></nowiki> "Sound Power Configuration")''
|''Run the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power")''


|}
|}
'''« File Sound Power.ini not valid ! »'''
'''« File Sound Power.ini not valid ! »'''


{|border="0" cellspacing="2" width="100%"
{|border="0" cellspacing="2" width="100%"
|''''''
|''Run the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power")''
|''Run the Sound Power configuration program (Menu "Start" <nowiki>></nowiki> "Programs" <nowiki>></nowiki> "NVSolutions" <nowiki>></nowiki> "Sound Power Configuration")''


|}
|}
Line 195: Line 109:
'''« Couldn<nowiki>'</nowiki>t start NVGate ! »'''
'''« Couldn<nowiki>'</nowiki>t start NVGate ! »'''


* ''Check the path of "NVGate.exe" in the Sound Power configuration program (Menu "Start" <nowiki>></nowiki> "Programs" <nowiki>></nowiki> "NVSolutions" <nowiki>></nowiki> "Sound Power Configuration")''
* ''Check the path of "NVGate.exe" in the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power")''
'''« Connection to NVGate has failed ! »'''
'''« Connection to NVGate has failed ! »'''


1. If NVGate location is = Local:
1. If the NVGate location is = Local:


* ''Check that NVGate is running. If not, escape from Sound Power and run it ''''again''
* ''Check that NVGate is running. If not, escape from Sound Power and run it ''again''.
* ''Check that NVGate can start on its side''
* ''Check that NVGate can start on its side.''


2. If NVGate location is = Remote:
2. If NVGate location is = Remote:


* ''Check that NVGate is running on the remote PC''
* ''Check that NVGate is running on the remote PC.''
* ''Check that the IP address of the remote PC is correct in the Sound Power configuration program (Menu "Start" <nowiki>></nowiki> "Programs" <nowiki>></nowiki> "NVSolutions" <nowiki>></nowiki> "Sound Power Configuration")''
* ''Check that the IP address of the remote PC is correct in the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power").''
'''« You don<nowiki>'</nowiki>t have the permission to use OROS Sound Power ! »'''
'''« You don<nowiki>'</nowiki>t have the permission to use OROS Sound Power ! »'''


* ''Ensure that you are using a dongle configurated for Sound Power''
* ''Ensure that you are using a dongle that is configured for Sound Power''
* ''Contact your OROS Agent''
* ''Contact your OROS Agent''
'''« Sound Power project not found ! »'''
'''« Sound Power project not found ! »'''
 
* ''Check the path of "NVGATE.EXE" in the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power") and validate (press "OK) in Local. If you are operating Sound Power in a Remote location, copy the "Sound Power" directory from the folder of installation of Sound Power into the default base.''
''CHECK THE PATH OF "NVGATE.EXE" IN THE SOUND POWER CONFIGURATION PROGRAM (MENU "START" <NOWIKI>></NOWIKI> "PROGRAMS" <NOWIKI>></NOWIKI> "NVSOLUTIONS" <NOWIKI>></NOWIKI> "SOUND POWER CONFIGURATION") AND VALIDATE (PRESS "OK") IN LOCAL. IF YOU ARE OPERATING SOUND POWER IN A REMOTE LOCATION, COPY THE "SOUND POWER" DIRECTORY FROM THE FOLDER OF INSTALLATION OF SOUND POWER INTO THE DEFAULT BASE OF''

Latest revision as of 16:54, 22 February 2024

The Sound Power Solution is meant to work in combination with its associated Analyzer software NVGATE®. In this way, the full power of the NVGATE® platform and associated multi channel INSTRUMENT HARDWARE is made fully available for your one clear objective: measuring Sound Power.

This "INSTALLATION GUIDE" will guide you through the installation of the Sound Power software and help you run it for the first time. It will explain in particular the way the installation should be done in parallel to NVGATE® and to the Instrument Hardware.

First Check

Recommended PC configuration

See PC Requirement page.

Equipment required for the installation

  • A NVGate dongle that is OROS Sound Power authorized.

Installation

Installation of the NVGate software

NVGate must be installed properly on the PC before starting the installation of Sound Power.

Installation of the Sound Power Solution

Ensure NVGate is installed and running on the PC before starting the installation of Sound Power.

Run the "setup.exe" program, and the following window is displayed:

SP install 1.png

Click on "Next >", and the following window is displayed:

SP install 2.png

Select the installation directory. It is highly recommended to keep the default location: C:\OROS\Programs\Sound Power. Installing Sound Power in the NVGate directory (as it is by default) enables links between the Sound Power Online Help and the NVGate Online Help.

Click on “Install” to begin the installation, and wait until the following window is displayed:

Image 2021-05-10 113928.png

Click on “Finish”, and the following window is displayed:

SP install 3.png


If NVGate is installed on the same PC:

  • Choose "Local" and indicate the path for "NVGate.exe". By default, it is: "C:\OROS\Programs\NVGate\NVGate.exe".

If you are using NVGate from another PC:

  • Choose "Remote" and indicate the IP address of this second PC.

If later you want to change the Sound Power configuration:

  • Launch SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power".

At this stage:

Plug in the Dongle to use Sound Power in Office Mode

Plug in the Hardware to use Sound Power in the Connected Mode.

And then, run "Sound Power".

The following window is displayed:

SP start.png

You can create a new setup by choosing the Standard, the Surface type and the Number of positions of your experiment or you can load a setup that is already created.

Click on "OK".

If NVGate has not been started previously, the following window is first displayed:

SP operator manager.png

Choose to start as operator or manager using a password.

Notice: The access level for the first user has to be "full".

Then, the following window is displayed:

SP NVGate connection window.png

Choose to start Sound Power in "Connection to hardware" or in "Office mode".

Updating the Software version

Uninstall the previous version of Sound Power installed on the PC. Then Start the installation of the new version.
Please follow the procedure described above.

Troubleshooting

Sound Power may not start. In this case, one of the following error messages is returned:


« File Sound Power.ini not found ! »

Run the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power")

« File Sound Power.ini not valid ! »

Run the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power")

« Couldn't start NVGate ! »

  • Check the path of "NVGate.exe" in the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power")

« Connection to NVGate has failed ! »

1. If the NVGate location is = Local:

  • Check that NVGate is running. If not, escape from Sound Power and run it again.
  • Check that NVGate can start on its side.

2. If NVGate location is = Remote:

  • Check that NVGate is running on the remote PC.
  • Check that the IP address of the remote PC is correct in the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power").

« You don't have the permission to use OROS Sound Power ! »

  • Ensure that you are using a dongle that is configured for Sound Power
  • Contact your OROS Agent

« Sound Power project not found ! »

  • Check the path of "NVGATE.EXE" in the Sound Power configuration program (Launch "SoundPowerConfig.exe" from "C:\OROS\Programs\Sound Power") and validate (press "OK) in Local. If you are operating Sound Power in a Remote location, copy the "Sound Power" directory from the folder of installation of Sound Power into the default base.
Retrieved from "https://wiki.oros.com/index.php?title=Sound_Power_Install&oldid=11877"