Difference between revisions of "Balancing single/dual plane Install"
(Created page with " ==How to install the single/dual plane balancing module== ===Equipment required for the installation:=== * Before proceeding to the Balancing installation, NVGate should be...") |
(No difference)
|
Revision as of 08:38, 19 June 2020
How to install the single/dual plane balancing module
Equipment required for the installation:
- Before proceeding to the Balancing installation, NVGate should be installed (Refer to NVGate User's Manual).
- Software CD containing OROS Balancing and the online help.
- A dongle dedicated to OROS Balancing software (in case of ORNVS-BAL-FL)
Software licensing
Standard license: ORNVS-BAL-ST
If you are using a standard license, the OROS hardware (OROS 3-Series analyzers) is used to allow the software operation. Your selected OROS analyzer should be connected when using the balancing solution.
For the standard license, your hardware keys should be updated. If it the case, use the delivered CD to update your hardware key. For details about this procedure, refer to your Analyzer installation guide.
Floating license: ORNVS-BAL-FL
If you are using a floating license, you should plug your USB balancing dongle when using the software (online or offline). The floating license will allow you to use your balancing software on any of your analyzers.
For the floating license, an updating of your hardware keys may be required. If it the case, use the delivered CD to update your hardware key. For details about this procedure, refer to your Analyzer installation guide.
Software installation
In order to install the OROS Balancing solution, start the setup.exe from the CD ROM. Then, follow the installation procedure as described below:
The following screen will appear: press OK to continue the installation.
Installation procedure start
The software installation proposes you to choose your installation directory based on the following window. If the default directory is satisfying, press the icon showing a computer.
Installation directory selection
At the next stage, you can choose the position of the shortcut in the Windows START menu. If the default path is satisfying press continue.
Start Menu path selection
The installation process is now finished. You can now press OK from the following dialog box.
Installation process completion
You can now start the Balancing solution from your WINDOWS START Menu.