Difference between revisions of "NVGate Display"

Latest revision as of 09:50, 14 January 2022

This section explains all the functions and information you can find in the graphs, windows and infotrace. It contains also the information relative to the scales, graphic modes, display modes and the contextual menus.

Different windows which contain one or more graphs or traces can be created using the Results dialog or the Add/remove window dialog. You can also add or remove some information in the Infotrace using the Infotrace properties. Manage all the display settings using the right click in almost any area. For each result type there are different available options using the right click.

The windows allow to display signal traces. They can contain several traces in the same graph (multi-trace display) or several graphs (multi-graph display). The windows can display 1D graphs (viewmeter, RPM monitoring), 2D graphs (profiles, signal recording) or 3D graphs such as Waterfall display.

Interface overview

Infotrace

The infotrace displays information about the graph:

Graph mode: magnitude, real...
List of traces with their states: available or not / displayed in all areas or not / not displayed. You can move into the infotrace to select a specified trace and to follow cursor’s value of this trace. Memorized traces are also displayed in the list (Memx)
Overall levels: Displays the RMS level in 2D windows containing spectra or time signals.
Cursor information: x, y, order, dx, dy if available
Marker arrays: Using keyboard arrows, you can select the active trace in the infotrace.

Traces names

The traces names indicate accurately what signal is displayed. A trace label consists of:

Item	Indicates	Example
File	Trace origin when it does not come from current analysis	Measurement A
Source	Trace origin when it does not come directly from a plug-in	Wtf, Mem02, Oper
Plug-in	The plug-in which calculated the trace	FFT 1, OCT
Results type	The type of result in the plug-in	AcgSpct, Coh, Trigger block
Channel	The channel in the plug-in	[3]
Label	The input Label	Acc. top
Section	The section in the Waterfall	Z= 2500 RPM, X=375 RPM
Unit/Weighting	Applied alteration	Pk-Pk, PSD, (A)
Time Date	Of the result	15:50:14 03/10/15

In order to simplify the trace identifications in applications that manage many measurement points (structural dynamics, Roving impact hammer) the content of the front-end identification settings are inserted in the trace labels.

The trace labels display the Component, Node and Direction when the corresponding setting is different from its default value:

Component = None
Node = 0
Direction = Scalar

This applies individually, setting by setting and is independent for each channel.

Contextual menu

The infotrace contextual menu is accessible by right clicking on the infotrace.

Customize: From the Infotrace, right click and select Customize.

This dialog box is used to select the information to be displayed in the infotrace (cursor coordinates, marker values…).

All checked items are displayed, unchecked items are not displayed.

Select All: Selects all items
Unselect All: Unselects all items
Ok: Applies the changes and closes the dialog box.
Cancel: ignores the changes and closes the dialog box.

Auto width: Sets the Infotrace area width to the width of the largest element currently displayed.

Copy marker table: Copies the marker table content to the clipboard in Excel format, in order to paste it in Excel. Each column/line of the table becomes a column/line in the Excel sheet.

See the "Copy marker" topic p 101 for more details about the marker table copy.

Close: Hides the Infotrace area.

Graph

A graph displays computed traces. It can be multi-trace or multi-graph.

Graph type

Time

Time graphs display time real signals.

Source signals (plug-in/process)
The following results may be displayed as time graphs:

Front-end: Signal.
Monitor: Triggered block.
FFT x: Triggered block, weighted block.
SOA x: Triggered block, weighted block.

Properties

X-Axis:

-Linear: uses linear scale for X-axis units.

Y-Axis:

-Linear: uses linear scale for Y-axis units.

-Logarithmic: uses logarithmic scale for Y-axis units.

Display mode

-Multi-graph: overlays all traces using one graph per trace on the same window.

-Multi-trace: overlays all traces in one graph.

-Multi-trace 3D: overlays all traces in one 3D graph.

-Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.

Trace color

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

The bottom of the area if Y scale is a dB one or Logarithmic one,

The 0 value if the Y scale is linear.

Spectral

Spectral graphs display narrow band (complex) spectra.

Source Signals
The following results may be displayed as spectral graphs:

Monitor: Inst. spectrum, Avg spectrum.
FFT x: Inst. spectrum, Avg spectrum, Inst cross-spectrum, Avg cross-spectrum, FRF H1, FRF H2, spectrum.
Sync. order x: Ord. inst. spectrum, Ord. avg. spectrum, Ord. spectrum.

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

-Logarithmic: uses logarithmic scale for X-axis units.

Y Axis:

-Linear: uses linear scale for Y-axis units.

-Logarithmic: uses logarithmic scale for Y-axis units.

dB: uses reference dB scale for Y-axis units.
Display mode

-Magnitude: overlays all magnitude traces on a single graph.

-Phase: overlays all phase traces on a single graph.

-Real part: overlays all real parts traces on a single graph.

-Imaginary part: overlays all imaginary part traces on a single graph.

-Magnitude/phase: overlays all magnitude traces on the upper graph and all the phase traces on the lower graph.

-Real/imaginary: overlays all magnitude traces on the upper graph and all the phase traces on the lower graph.

-Polar: overlays all complex traces on a polar graph:  = magnitude,  = phase.

-Real part 3D: displays all real part traces as a 3D graph arranged along the Z-axis.

-Imaginary part 3D: displays all imaginary part traces as a 3D graph arranged along the Z-axis.

-Magnitude 3D: displays all magnitude traces as a 3D graph arranged along the Z-axis.

-Phase 3D: displays all phase traces as a 3D graph arranged along the Z-axis.

-Real part multi-graph: displays all real part traces using one graph per trace in the same window.

-Imaginary part multi-graph: displays all imaginary part traces using one graph per trace in the same window.

-Magnitude multi-graph: displays all magnitude traces using one graph per trace in the same window.

-Phase multi-graph: displays all phase traces using one graph per trace in the same window.

-Phase/Magnitude: overlays all phase traces on the upper graph using 1/3 of window space and all the magnitude traces on the lower graph using 2/3 of the window.

-Merged Magnitude/Phase: displays all magnitude and phase part traces as a unique graph.

-Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

the bottom of the area if Y scale is a dB one or Logarithmic one,

the 0 value of the Y scale is linear.

Dynamics:

-90 dB: resizes the Y-axis to 90 dB dynamics starting from +20 dBV.

-110 dB: resizes the Y-axis to 110 dB dynamics starting from +20 dBV.

-130 dB: resizes the Y-axis to 130 dB dynamics starting from +20 dBV.

-150 dB: resizes the Y-axis to 150 dB dynamics starting from +20 dBV.

Phase:

- -180° -> 180°: sets the phase graph Y-axis between –180° to +180°.

-0 -> 360°: sets the phase graph Y-axis between 0 to +360°.

Rotations: sets the number of rotations to be displayed on the Y-axis.

Lissajous

Parametric graph of one triggered block with another one for reference.

Source Signals
The following results may be displayed into Lissajous graphs:

FFT x: Lissajous.

The perimeter of the Lissajous corresponds of the FFT length’s block.

You can use filters on this kind of graph, as integration or a double integration.

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

Y Axis:

-Linear: uses linear scale for Y-axis units.

Display mode:

-Multi-trace: overlays all traces on a single graph.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Orthonormal view: if checked, the graph is displayed in an orthonormal area.

Nth octave

Displays nth octave band graph.

Source Signals
The following results may be displayed as nth octave graphs:

Nth-Octave: 1/n octave, Avg 1/n octave.

Properties

Y Axis:

-Linear: uses linear scale for Y-axis units.

-Logarithmic: uses logarithmic scale for Y-axis units.

-dB: uses reference dB scale for Y axis units.

Display mode

-Bar: bar representation

-Step: step representation

-Rectangle: overlaid rectangle

-Filled: overlaid filled rectangles.

Display mode

-Multi-trace: overlays all traces on a single graph.

-Multi-graph: one graph for each trace.

-Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.

Trace color

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

Overall level

-Linear: if checked, the linear global level is displayed.

-Weighted: if checked and available, the weighted level is displayed.

Frequencies:

-Exact: displays exact band center frequency.

-Preferred: displays preferred frequencies, i.e rounded values for the central frequencies. Preferred frequencies are only available for octave and 1/3rd octave windows: in the octave. If this mode is selected in 12th and 24th octave windows, exact frequencies are displayed.

Dynamics:

-90 dB: resizes the Y-axis to 90 dB dynamics starting from +20 dBV.

-110 dB: resizes the Y-axis to 110 dB dynamics starting from +20 dBV.

-130 dB: resizes the Y-axis to 130 dB dynamics starting from +20 dBV.

-150 dB: resizes the Y-axis to 150 dB dynamics starting from +20 dBV.

Viewmeter

Displays scalar value graphs.

Source Signals
The following results may be displayed as nth viewmeter graphs:

Front-end: DC.
Monitor: DC, Max, Min, Kurtosis.
Recorder: RMS
FFT X: Order & Overall
SOA X: Order & Overall
1/n Octave: Overall values
Tachometer: Angular speed

Properties
This page defines the way in which the scalar results are displayed.

Display mode: There are two types of display:

-Bar graph:

-Digital display

Y Axis:

-Linear: uses linear scale for Y-axis units.

-Logarithmic: uses logarithmic scale for Y-axis units.

-dB: uses reference dB scale for Y-axis units.

Display max, Display min: Displays the min and the max scalar value as a cursor. The color of the cursor can be freely selected. This property only applies to bar graphs.
Display low level: Changes the color of the display when the value is below this level. The color can be freely selected.
Display high level: Changes the color of the display when the value is higher than this level. The color can be freely selected.
Display alarm level: Changes the color of the display when the value is higher than this level. The color can be freely selected.
Brick height: Defines the height of the bricks for the viewmeter and brick display modes.
Save as user preference: When this box is checked, the value is given as a percentage of the full scale, and may be applied to any graph.

Monitoring

Displays compressed signal graph during recording.

Source Signals
The following results may be displayed as nth monitoring graphs:

Recorder: monitoring signal

Properties

Trace color

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

X Axis

-Absolute time: displays the time from windows format.

-Relative time: displays the duration of the record. The beginning of the record is set to 0.

-Auto: selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.

Y Autoscale:

-Continuous: the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.

-Disabled: Y autoscale is not activated.

Compressed signal

Displays compressed recorded signal graphs.

Source Signals
The following results may be displayed as nth compressed signal graphs:

Zoomed signal

This kind of zoom can be done by ’drag & drop’ the selected zone you want to analyze.

After displaying the zoomed signal, on the recorded signal you can modify your zoom at any time. All changes would be displayed automatically in the zoomed signal as soon as you modified your zoomed zone.

Check record
Check record function is for verifying the signal data in details just after its acquisition. When NVGate records a signal, the save window proposes to display the zoom signal view of the saved measurement. The signal is displayed after closing the window with OK.

It is then possible to:

Zoom into the signal by drag & dropping on the graph
Listen to the tracks through the PC loudspeaker by clicking on the loudspeaker icon. Select the listened track with the up/down arrows.

Properties

Trace color

- Number: selects the trace number for color modification.

- Color box: click on this box to modify the color of the selected trace.

X Axis

- Absolute time: displays the time from windows format.

- Relative time: displays the duration of the record. The beginning of the record is set to 0.

- Auto: selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.

Profile

Displays scalar profile.

Source Signals
The following results may be displayed as nth compressed signal graphs:

Monitor: DC, Max, Min, Kurtosis

Front-end: DC

Tachometer: RPM

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

Y Axis

-Linear: uses linear scale for Y-axis units.

Display mode

-Magnitude: overlays all magnitude traces on a single graph.

-Phase: overlays all phase traces on a single graph.

-Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.

Trace color

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

the bottom of the area if Y scale is dB or Logarithmic,

the 0 value if the Y scale is linear.

X Autoscale:

-Continuous: the X scale is automatically adjusted to the current min and max x values of the window traces.

-Disabled: X autoscale is not activated.

Y Autoscale

-Continuous: the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.

-Disabled: Y autoscale is not activated.

Complex profile

Source Signals
The following results may be displayed as complex profile graphs:

FFT X: Order profile
Waterfall: Order profile
SOA X: Order profile

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

Y Axis:

-Linear: uses linear scale for Y-axis units.

-Logarithmic: uses logarithmic scale for Y-axis units.

-dB: uses reference dB scale for Y axis units.

Display mode:

-Magnitude: overlays all magnitude traces on a single graph.

-Phase: overlays all phase traces on a single graph.

-Real part: overlays all real part traces on a single graph.

-Imaginary part: overlays all imaginary part traces on a single graph.

-Magnitude/phase: overlays all magnitude traces on the upper graph and all phase traces on the lower graph.

-Real/imaginary: overlays all magnitude traces on the upper graph and all phase traces on the lower graph.

-Polar: displays in polar coordinates, the phase and the amplitude on a single graph.

-Real part multi-graph: displays all real part traces using one graph per trace in the same window.

-Imaginary part multi-graph: displays all imaginary part traces using one graph per trace in the same window.

-Magnitude multi-graph: displays all magnitude traces using one graph per trace in the same window.

-Phase multi-graph: displays all phase traces using one graph per trace in the same window.

-Phase/Magnitude: overlays all phase traces on the upper graph using 1/3 of window space and all the magnitude traces on the lower graph using 2/3 of the window.

-Merged Magnitude/Phase: displays all magnitude and phase parts traces on a single graph.

-Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

The 0 value if the Y scale is linear.

Dynamics:

-90 dB: resizes the Y-axis to 90 dB dynamics starting from +20 dBV.

-110 dB: resizes the Y-axis to 110 dB dynamics starting from +20 dBV.

-130 dB: resizes the Y-axis to 130 dB dynamics starting from +20 dBV.

-150 dB: resizes the Y-axis to 150 dB dynamics starting from +20 dBV.

Phase:

--180° -> 180°: sets the phase graph Y-axis between –180° to +180°.

-0 -> 360°: sets the phase graph Y-axis between 0 to +360°.

-Rotations: sets the number of rotations to be displayed on the Y-axis. Example for 5 rotations:

X Autoscale:

-Continuous: the X scale is automatically adjusted to the current min and max x values of the window traces.

-Disabled: X autoscale is not activated.

Y Autoscale:

-Continuous: the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.

-Disabled: Y autoscale is not activated.

Coherence

Displays coherence graphs.

Source Signals:
The following results may be displayed as coherence graphs:

FFT X: Coherence

Properties

X Axis:
Linear: uses linear scale for X-axis units.
Y Axis:

-Linear: uses linear scale for Y-axis units.

Display mode:

-Multi-graph: overlays all traces on a single graph.

-Multi-trace: displays all traces using one graph per trace in the same window.

-Time multi-trace 3D: overlays all traces on a single 3D graph.

-Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

the bottom of the area if Y scale is dB or Logarithmic,

the 0 value if the Y scale is linear.

Shaft View

The shaft view or "marguerite" shows the trigger block of FFTs and SOA around one revolution. This graph includes angular cursors (with delta-angle) useful for reading the location of peaks.

Note that in order to provide a stable trace, the corresponding plug-in must be triggered by a keyphasor. This keyphasor (any edge event) being the phase reference of each revolution. In the case of synchronous order analysis, the plug-in is automatically triggered on the tach. pulses.

The shaft view shows the first entire revolution contained in the trigger block. If less than one revolution is contained in the trigger block, nothing is displayed. A tachometer must be connect to the FFT or SOA plug-in in order to show traces in the shaft view.

The rotation indicator (and the angle labels arrangement 0 to 360°) is defined by the user’s preferences or directly from the window’s properties.

The keyphasor location is also user definable: It may take place every 45° along the complete revolution.

All graphs in a window have the same rotation and keyphasor location.

Source Signals

The following results may be displayed as Triggered Shaft View graphs on condition that a tachometer is associated to the plug-in:

FFT x: Triggered Shaft View
SOA x: Triggered Shaft View

The following results may be displayed as Average Shaft View graphs on condition that a tachometer is associated to the plug-in and that time average is chosen:

FFT x: Average Shaft View
SOA x: Average Shaft View

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

Y Axis:

-Linear: uses linear scale for Y-axis units.

Display mode:

-Multi-graph: overlays all traces on a single graph.

-Multi-trace: displays all traces using one graph per trace in the same window.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

the 0 value if the Y scale is linear.

Key phasor: Allows to specify the position of the key phasor by entering the shift angle in ° and the direction left or right.
Rotation indicator:

-Counter-Clockwise: defines a counter-clockwise rotation.

-Clockwise: defines a clockwise rotation.

Waterfall graphs (2D view, 3D view, color spectrum)

Slices sorting selection in 2D/3D

NVGate is able to display unwrapped run-up/down profiles The "Sort points" selection allows displaying the data along one X scale but sort it along another reference.

The following example shows data displayed with tachometer speed on the X axis speed but sorted along to the time:

This is useful for mixed run up/down to see hysteresis.

Second X axis in profiles

For applications with mixed run-Up/Down (RPM, Torque, Temperature, etc...), it is useful to see the results evolution according to their occurrence (time, slice) but keeping the up/down information. This feature allows viewing the data unwrapped.

Waterfall display features different type of view of the stacked results. All views are related to the same 3D space:

The Z-axis is the selected reference (RPM, time or number of slices in order of the acquisition) its range is the waterfall depth. You can change the reference for z-axis at any time. This is available for 2D and 3D view.

The Y-axis is the selected magnitude; this can be changed at any time.

The X-axis is the frequency.

Tachometer centered on FFT/SOA blocks

This allows centering tachometer speed at the center of the FFT/SOA trigger block(s). It is useful with long trigger blocks (High resolution analyses) to perfectly match the actual data with the order cursor or section.

With classical tach:

The RPM is collected at the end of the analysis block.

This situation leads to an offset in the waterfall calculation of the orders (cursors, sections). For a run up, as the angular speed is over evaluated, the order calculation is lower than the actual ones.

With centered tach:

The RPM is calculated as the average speed during the block duration to be synchronized with the analyzed data.

With the centered tachometer, the orders calculations match more accurately the actual orders in waterfall.

The computation of the angular speed takes in account the averaging, triggering and overlap used in the plug-in.

The centered speed is calculated as:

The RPM centering and averaging is done in the analysis plug-in prior to be connected to the waterfall. To use the centered tach simply add the said tachometer to the corresponding plug-in (FFTn or SOAn). These additional tachometers are available in the waterfall as soon as one of the result of the plug-in is added to the waterfall.

1. Add Tach to the Plug-in,

2. Add plug-in results (Spectra, orders, etc..) to the waterfall,

3. Display the waterfall

4. Select the Plug-in Tach, as a tachometer and reference

display modes :

5. 3D isometric

6. 3D perspective:

7. Freq/Time Colormap:

8. Time/Freq Colormap:

Orbit

Displays the AC dynamic motion of the center of a rotating shaft. It generates a two-dimensional image.

Source Signals

The following results may be displayed as Orbit graphs on condition that a tachometer is associated to the plug-ins:

FFT x: Raw Orbit, Synthetized Orbit ( for customer with FFT-diag option)
SOA x: Raw Orbit, Synthetized Orbit (For customer with ORD-Diag option)

Note :

The Raw Orbit graph displays an entire number of complete rotations contained in one block. At least one rotation is required.

The FFT should better be triggered by the Ext. Sync. channel.

If the FFT is bad configured, it is possible that no results are shown.
The FFT synthtetized Orbit is only available for customer with FFt-CBT option. The FFT synthetized Orbit is filtered using CBT technics. this method provide a non accurate phase value on synthetiseed orbit. For acurate synthetize Orbit phase, you need to use the SOA Synthetized Orbit.

The ORD Synthesized Orbit graph is calculated with the orders of two channels selected. For a couple "ChannelA, ChannelB" up to 8 Synthesized Orbits can be selected. Each orbit corresponds to an order which appears in the tracked order setting.

The display of the Synthesized Orbit is done on 360 points (1 point per degree).

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

Y Axis:

-Linear: uses linear scale for Y-axis units.

Display mode:

-Multi-graph: overlays all traces on a single graph.

-Multi-trace: displays all traces using one graph per trace in the same window.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

the bottom of the area if Y scale is dB or Logarithmic,

the 0 value if the Y scale is linear.

Rotation indicator:

-Counter-Clockwise: defines a counter-clockwise rotation

-Clockwise: defines a clockwise rotation.

Autoscale:

-Continuous: applies a continuous autoscale during the measurement.

-Disabled: disable the autoscale.

Orientation: Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal.
Number of revolutions: Number of revolution displayed in the graph.

Gap

Displays the shaft center DC position changes.

Source Signals

The following results may be displayed as Gap graphs:

Waterfall: Gap

The Gap is available in the Waterfall for the Monitor and Time domain analyzer plug-ins and only for the DC values.

Properties

X Axis:

-Linear: uses linear scale for X-axis units.

Y Axis:

-Linear: uses linear scale for Y-axis units.

Display mode:

-Multi-graph: overlays all traces on a single graph.

-Multi-trace: displays all traces using one graph per trace in the same window.

Trace color:

-Number: selects the trace number for color modification.

-Color box: click on this box to modify the color of the selected trace.

-Filling mode: if selected, all the curves of the windows are filled from:

the bottom of the area if Y scale is dB or Logarithmic,

the 0 value if the Y scale is linear.

Rotation indicator:

-Counter-Clockwise: defines a counter-clockwise rotation.

-Clockwise: defines a clockwise rotation.

Autoscale:

-Continuous: applies a continuous autoscale during the measurement.

-Disabled: disable the autoscale.

Orientation: Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal.
Tags:

-Visible: Tags are visible on the graph.

-Number: defines the tags density on the plot (min or max).

Contextual menu

The Graph contextual menu is accessible by right clicking on the graph.

Axis properties

The axis values and behavior can be set in the Axis properties dialog box.

Min: Enabled only when the User Define type is selected. It sets the minimum value assigned to the scale.
Max: Enabled only when the User define type is selected. It sets the maximum value assigned to the scale.
Boundaries:

- User Define: Used to select the min and max scale values.

- Autoscale on active trace: The minimum and maximum scale values are automatically adjusted to the values of the active trace.

- Autoscale on all traces: The minimum and maximum scale values are automatically adjusted so that every trace is fully visible.

Type: Changes the type of scale (Linear, logarithmic or dB). Only the available types are enabled.
Enable/disable zoom: when checked, it is impossible to make any change to the scale.

Zoom

X zoom
All of these functions are available if there is no active X automatic autoscale.

Zoom in: Zoom in on the horizontal scale by placing the cursor position in the center. If the center is at the minimum value, you may not zoom. You may zoom if the X scale width is greater than the active signal precision in X.
Zoom out: Zoom out from the horizontal scale by placing the cursor position in the center. If the center is at the minimum value, you may not zoom. You may zoom if Z min and max values are included in the min and max value gap defined by the active signal of the window.
Full width: Restores the X min and max values defined by the active signal of the window.
Auto-scale: Set min and max values of the X scale to the X min and max values of the active signal for the "On active" item and to the X min and max values of all signals of the window for "On all" item. A margin is added to these values to facilitate visibility. The X width is always more than X active signal precision.

Y zoom

Zoom in: Used to zoom in on the vertical scale. You may zoom in if the scale width is greater than the active signal precision in Y.
Zoom out: Used to zoom out from the vertical scale. You may zoom in if min and max values are included in Y min and max value gap defined by the active signal of the window.
Full width: Restores the Y min and max values defined by the active signal of the window.
Auto-scale: Sets min and max values of the Y scale to the Y min and max values of the active signal for the "On active" item and to the min and max values of all signals of the window for "On all" item. A margin is added to these values to facilitate visibility. The Y width is always more than Y active signal precision.

Z zoom
All of these functions are available if there is no active X automatic autoscale.

Zoom in: Used to zoom in on the Z scale. You may zoom if the scale width is greater than the active signal precision in Z.
Zoom out: Used to zoom out from the Z scale. You may zoom if min and max values are included in Z min and max value gap defined by the active signal of the window.
Full width: Restores the Z min and max values defined by the active signal of the window.
Auto-scale: Sets min and max values of the Z scale to the Z min and max values of the active signal. A margin is added to these values to facilitate visibility. The Y width is always greater than Y active signal precision.

Scale

X scale: Changes X scale type of the area to the selected type. Available types (according to the kind of the area) are:

Linear
Logarithmic

Y scale: Changes Y scale type of the area to the selected type. Available types (according to the kinds of the area and the window) are:

Linear
Logarithmic
DB

Z scale: Changes Z scale type of the area to the selected type. Available types (according to the kinds of the area and the window) are:

Linear
Logarithmic
dB

Marker manager

This dialog is only available for the Monitoring and Compressed windows. It contains the list of all record markers of the record signal opened. In the monitoring window, each record marker comment can be modified. In the compressed window, comments cannot be modified.

Reset Min & Max

Restores min and max values for the selected scale

Window

Contextual menu

The window contextual menu is accessible by right clicking on the part around the graph.

Display

In each window, several display modes are available, depending on the graph type.

Graph type	Display mode
Time signal	Multi-trace Multi-graph Time multi-trace 3D
Spectral	Magnitude Phase Real part Imaginary part Magnitude/Phase Real/Imaginary Polar Real part 3D Imaginary part 3D Magnitude 3D Phase 3D Real part multi-graph Imaginary part multi-graph Magnitude multi-graph Phase multi-graph Merged magnitude/phase
Nth Octave	Multi-trace Multi-graph
Viewmeter/Monitoring	Continuous Viewmeter Brick Digital Digital magnitude & phase
Waterfall	Magnitude Phase Real part Imaginary part
Monitoring/Compressed signal	Multi-graph (Only one mode available)
Profile	Multi-trace Multi-graph
Complex profile	Magnitude Phase Real part Imaginary part Magnitude/Phase Real/Imaginary Real part multi-graph Imaginary part multi-graph Magnitude multi-graph Phase multi-graph Merged magnitude/phase
Lissajoux	Multi-trace (Only one mode available)
Constant Band Tracking	Magnitude Phase Real part Imaginary part Magnitude/Phase Real/Imaginary Real part multi-graph Imaginary part multi-graph Magnitude multi-graph Phase multi-graph Merged magnitude/phase

Multi-trace:	This mode displays all window traces of the same type in one graph. In several window types, two multi-trace graphs are displayed in the same window: for example, one for the Real part and one for the imaginary part. In this mode, a magnitude gathering mode can be activated in the set preferences window: this mode displays signals by creating one area for each Y magnitude included in the window. If two or more signals have the same Y magnitude, they will be displayed in the same area.
Multi-graph:	This mode displays one graph per trace in the window.
Multi-trace 3D:	This mode displays all traces in the same 3D graph.
Real part:	This mode displays the real part of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
Imaginary part:	This mode displays the imaginary part of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
Magnitude:	This mode displays the magnitude of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
Phase:	This mode displays the phase of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
Merged magnitude/phase:	This mode displays the magnitude and the phase of the signal in the same area. This is a multi-trace mode. The module scale is on the left of the graph and the phase scale is on the right.

Properties

See "Graph type" topic p 37.

Always on top: the window will be on top
Default: reset the all the settings to the default settings
Apply to: applies the settings either to All windows or just for the Active window
Save as user preferences: save the properties settings

Active trace

Select the active trace of the window. When the signal changes, the Y scale is updated to the Y magnitude of the signal. Only signals with the same Y magnitude as the active signal are displayed. The others are displayed as unavailable in the info-trace.

The color of the cursor corresponds with the trace’s color; you can select in the infotrace the active trace and its linked cursor using arrays of the keyboard.

Remove trace

Removes selected trace from the window. If this trace is the active one, the active signal is changed. A trace can be removed using ’Ctrl suppr’.

Memorize trace

Memorizes the active trace of the active window at any time (independently from Run and Stop event).

The memorized trace is named Memx: active trace name. There’s an incrementation of the memorized traces id (x). You can save the memorized traces by adding it to the result selection.

Note: you can memorize an active trace by using the insert button of the keyboard.

Clear memory

Clear all memorized traces. You can remove specific memorized traces with the ’Remove trace’ command.

AutoMemorize

’AutoMemorize’ traces consists in memorizing traces on the stop event. Select the graph to be memorized.

By using an operator on an active trace and his associated memorized traces is available by right-clicking on the graphs and selecting ’operators’. This operator will be automatically updated if a memorized trace is added or deleted (see also operators).

During a multi-run, the average on automatic memorized trace is done automatically for each run, and the average trace is automatically updated.

Auto scale Y on all

Sets min and max values of the Y scale to the Y min and max values of all signals displayed in the graph. A margin is added to these values to facilitate visibility. The Y width is always more than Y active signal precision.

Cascade view

Present the current active trace in a cascade view of the last 50 (default value) recovered results.

This is dedicated for monitoring used, this is not a waterfall (acquisition mode in real-time). The Z-axis represents the number of slices independently from any reference such as time or RPM evolution.

This function is available only for 2D spectra and trigger blocks.

Warning: if you are in manual trigger, or if there is an absence in the time, you won’t be able to notice it with the cascade view. In the following example, a pause has been made during the measurement; on the waterfall 3Dview (with time for reference) it is possible to see this pause. In the cascade view the pause won’t be noticed (number of block for reference).

Weighting

These commands are available only for results with an X-Axis that represents frequencies. The operations are performed in the spectral domain

None: No weighting is applied.
A Weighting: Selects the "A" weighting
More: Used to select specialized weighting

See more details about Weightings in NVGate Filters.

Add to Result selection

This command adds all the results displayed in the window to the list of results that must be saved in a measurement. If the result is already on the list, it is not added. Some results displayed cannot be saved (Instant trigger of the front end, profile of a DC input).

Copy graph(s)

This command copies the active graph in the format ’wmf’, this command is not available for 3D Waterfall.

Copy bitmap

This command copies graph in the format ’.bmp’

Copy data

This command copies data in order to export them in Excel. This will export all point’s values from the active graph. NVGate export values with a point as separator and in engineer mode. This command is available for all spectra and profiles (even waterfall profiles).

If the graph is displayed with complex values, then the ’copy data’ command allows to export phase and module values.

Example:

Natural values:

Values displayed are values from the Active trace:

Complex values:

For complex values the ’Copy data’ will displayed phase and module values.

Copy to Mask

Adds the result to the project template results. This result is then available for editing and use as a template.

Add Alarm

Dialog box to create an alarm. An alarm compares a dynamic signal with a template result. The result of the comparison can be used in the macro to perform certain tests.

To make this option available, a result template must be added to the window (using drag & drop for example).

Go to the "Chapter 5: Tools" to see more details about the Result template.

To create an alarm, select a result from the top list, a template from the bottom list and click the Add button. The list on the right displays a list of the existing alarms.

Pointer type

The pointer type depends on the mode that is activated in the Display Tab.

	Zoom: Displayed when the magnifying tool is selected: Used to select a rectangle in a graphic area, or to zoom in with a by left click and drag.
	Cursor: Displayed when cursor mode is selected: Used to move the cursor by left clicking and dragging.
	Move: Displayed when ’move mode’ is selected. Used to change x and y scale boundaries by left clicking and dragging.
	Rotation: Displayed when the rotation tool is selected: Used to rotate a 3D graph.
	Marker: Displayed when the marker mode is activated. Used to modify the marker position and properties.
	Scale scrolling: Displayed when scale mode is selected and when the cursor is on a scale area.

Cursors

Style

Vertical line:	Displays a single line.
Vertical dashed line:	Displays a single dashed line.
Vertical with rectangle:	A rectangle is displayed around the selected point.
Cross hair:	No line is displayed but there is a target around the selected point.
Vertical + horizontal:	Displays 2 lines, an horizontal and a vertical that cross the selected point.

Dual

Select 2 cursors from the window properties. That allows to compute delta values on X-axis and Y-axis.

Cursor Link

Link the cursors of different graphs that share the same unit on the X-Axis. Once linked, all the cursors move at the same time and the same position.

Link all cursors in one click

Cursors can be linked one by one to follow the same X-coordinate. It is now possible to link/unlink from the cursor contextual menu.

This applies to the link by reference and covers all the cursors of the current layout.

Waterfall link

Link: Link the cursor of different graphs that share the same unit on the X-Axis. Once linked, all the cursor moved at the same time and the same position.

Link by reference: Link the cursor of several Waterfalls referring to their internal index. Enables linking cursors that are displayed in graphs that do not share the same unit.

Free: Release a cursor that has been previously linked.

@@ Line 1: / Line 1: @@
-<FONT SIZE = "6">'''DISPLAY, GRAPHS & TRACES'''</FONT>
+This section explains all the functions and information you can find in the graphs, windows and infotrace. It contains also the information relative to the scales, graphic modes, display modes and the contextual menus.
-<u>Reference manual Vol 2</u>
-===Table of contents===
+Different windows which contain one or more graphs or traces can be created using the [[NVGate_GoToResult#Step_2_Show_results|''Results'' dialog]] or the [[NVGate_Ribbons:_Display/Graph_Tab#Add.2Fremove_window|''Add/remove window'' dialog]]. You can also add or remove some information in the Infotrace using the Infotrace properties. Manage all the display settings using the right click in almost any area. For each result type there are different available options using the right click.
-----
+[[File:Window_display_2022.JPG|700px]]
-===Introduction===
+<Youtube>https://www.youtube.com/watch?v=CuUHne-GEVQ</Youtube>
-This section explains all the functions and information you can find in the graphs, windows, infotrace. The Display chapter also contains the information relative to the scales, graphic modes, display modes and the contextual menus.
-====Add/remove====
+The windows allow to display signal traces. They can contain several traces in the same graph (multi-trace display) or several graphs (multi-graph display). The windows can display 1D graphs (viewmeter, RPM monitoring), 2D graphs (profiles, signal recording) or 3D graphs such as Waterfall display.
-Allows to display the measurement results of the active plug-in analyzers.
-You can display the Add/Remove window from the '''Display''' tab.
-The maximum number of traces, windows and layout available are:
-* 32 Traces per Window
-* 32 Windows per Layout
-* 16 Layouts per project.
-===Display Window===
-The windows allow to display signal traces. They can contain several traces in the same graph (multi-trace display) or several graphs (multi-graph display). The windows can display 1D graphs (viewmeter, RPM monitoring), 2D graphs (profiles, signal recording) or 3D graphs such as Waterfall display.
-====Areas (infotrace, graph, scale)====
+===Interface overview===
-All the window areas described below are right clickable so the user can choose the active trace, apply an operator or change the scales.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_13.png|framed|none]]
+<div style="position: relative">[[File:Interface_overview.JPG|700px]]
+<div style="position: absolute; left: 520px; top: 40px">[[File:text_ribbon.png|150px]]</div>
+<div style="position: absolute; left: 30px; top: 180px">[[File:Text_workspace.png|100px]]</div>
+<div style="position: absolute; left: 500px; top: 200px">[[File:Text_windows.png|180px]]</div>
+<div style="position: absolute; left: 500px; top: 330px">[[File:Text_log_window.png|100px]]</div>
+<div style="position: absolute; left: 550px; top: 370px">[[File:Text_status_bar.png|100px]]</div>
+</div>
+</div>
-=====Infotrace=====
+===Infotrace===
-Displays information about the graph:
+The infotrace displays information about the graph:
 * '''Graph mode:''' magnitude, real...
@@ Line 35: / Line 29: @@
 * '''Overall levels:''' Displays the RMS level in 2D windows containing spectra or time signals.
 * '''Cursor information:''' x, y, order, dx, dy if available
-* '''Marker arrays'''
+* '''Marker arrays:''' Using keyboard arrows, you can select the active trace in the infotrace.
-Using keyboard arrows, you can select the active trace in the infotrace.
+[[File:Infotrace_2022.JPG|700px]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_14.png|framed|none]]
+====Traces names====
+The traces names indicate accurately what signal is displayed. A trace label consists of:
-=====Traces names=====
+{|class="wikitable" style="background:white" border="2" cellspacing="0" cellpadding="4" width="70%"
-The trace names indicate accurately what signal is displayed. A trace label consists on:
-{|border="2" cellspacing="0" cellpadding="4" width="100%"
 |'''Item'''
 |'''Indicates'''
-|'''example'''
+|'''Example'''
 |-
@@ Line 61: / Line 53: @@
 |-
 |Plug-in
-|The plug-who calculate the trace
+|The plug-in which calculated the trace
 |FFT 1, OCT
@@ Line 98: / Line 90: @@
 In order to simplify the trace identifications in applications that manage many measurement points (structural dynamics, Roving impact hammer) the content of the front-end identification settings are inserted in the trace labels.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_15.png|framed|none]]
+[[File:Trace_name_2022.JPG|700px]]
 The trace labels display the ''Component'', ''Node'' and ''Direction'' when the corresponding setting is different from its default value:
@@ Line 107: / Line 99: @@
 This applies individually, setting by setting and is independent for each channel.
-=====Graph=====
+====Contextual menu====
-Displays computed traces. It can be multi-trace or multi-graph.
-=====Scale=====
+The infotrace contextual menu is accessible by right clicking on the infotrace.
-Displays the magnitude and the grid of the graph
-====Pointer type====
+'''Customize''': From the Infotrace, right click and select Customize.
-The pointer type is selected from the ''Measurement'' Tab./ ''Graphs'' group
-=====Scale scrolling=====
+[[Image:Display_Graphs_Traces_23.png|framed|none]]
-Displayed when scale mode is selected and when the cursor is on a scale area. See cursor toolbar for details.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_16.png|framed|none]]
-=====Zoom=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_17.png|framed|none]]
-Displayed when the magnifying tool is selected:  Used to select a rectangle in a graphic area, or to zoom in with a by left clicking and dragging.
-=====Cursor=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_18.png|framed|none]]
-Displayed when cursor mode is selected: Used to move the cursor by left clicking and dragging.
-=====Move=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_19.png|framed|none]]
-Displayed when <nowiki>’</nowiki>move mode<nowiki>’</nowiki> is selected. Used to change x and y scale boundaries by left clicking and dragging.
-=====Rotation=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_20.png|framed|none]]
-Displayed when the rotation tool is selected: Used to rotate a 3D graph.
-=====Marker=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_21.png|framed|none]]
-Used to modify the marker position and properties.
-----
-===Contextual menu===
-Apply any action to the displayed traces and/or graphs by using the contextual menus on the selected area.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_22.png|framed|none]]
-====Infotrace menu====
-=====Customize=====
-From the Infotrace, right click and select Customize.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_23.png|framed|none]]
 This dialog box is used to select the information to be displayed in the infotrace (cursor coordinates, marker values…).
@@ Line 168: / Line 116: @@
 * '''Cancel:''' ignores the changes and closes the dialog box.
-=====Auto width=====
+'''Auto width:''' Sets the Infotrace area width to the width of the largest element currently displayed.
-Sets the Infotrace area width to the width of the largest element currently displayed.
-=====Copy marker table=====
+'''Copy marker table:''' Copies the marker table content to the clipboard in Excel format, in order to paste it in Excel. Each column/line of the table becomes a column/line in the Excel sheet.
-Copies the marker table content to the clipboard in Excel format, in order to paste it in Excel. Each column/line of the table becomes a column/line in the Excel sheet.
 See the "Copy marker" topic p 101 for more details about the marker table copy.
-=====Close=====
+'''Close:''' Hides the Infotrace area.
-Hides the Infotrace area.
-----
-====Graph menu====
-=====X zoom=====
-All of these functions are available if there is no active X automatic autoscale.
-* '''Zoom in: '''Zoom in on the horizontal scale by placing the cursor position in the center.
-If the center is at the minimum value, you may not zoom. You may zoom if the X scale width is greater than the active signal precision in X.
-* '''Zoom out:''' Zoom out from the horizontal scale by placing the cursor position in the center.
-If the center is at the minimum value, you may not zoom. You may zoom if Z min and max values are included in the min and max value gap defined by the active signal of the window. Full width.
-Restores the X min and max values defined by the active signal of the window.
-* '''Full width:''' Restores the Z min and max values defined by the active signal of the window.
-* '''Auto-scale:''' Set min and max values of the X scale to the X min and max values of the active signal for the "On active" item and to the X min and max values of all signals of the window for "On all" item. A margin is added to these values to facilitate visibility. The X width is always more than X active signal precision.
-=====Y zoom=====
-* '''Zoom in:''' Used to zoom in on the vertical scale. You may zoom in if the scale width is greater than the active signal precision in Y.
-* '''Zoom out:''' Used to zoom out from the vertical scale. You may zoom in if min and max values are included in Y min and max value gap defined by the active signal of the window. Full width:
-Restores the Y min and max values defined by the active signal of the window.
-* '''Full width:''' Restores the Z min and max values defined by the active signal of the window.
-* '''Auto-scale:''' Sets min and max values of the Y scale to the Y min and max values of the active signal for the "On active" item and to the min and max values of all signals of the window for "On all" item. A margin is added to these values to facilitate visibility. The Y width is always more than Y active signal precision.
-=====Z zoom=====
-All of these functions are available if there is no active X automatic autoscale.
-* '''Zoom in:''' Used to zoom in on the Z scale. You may zoom if the scale width is greater than the active signal precision in Z.
-* '''Zoom out:''' Used to zoom out from the Z scale. You may zoom if min and max values are included in Z min and max value gap defined by the active signal of the window.
-* '''Full width:''' Restores the Z min and max values defined by the active signal of the window.
-* '''Auto-scale''': Sets min and max values of the Z scale to the Z min and max values of the active signal. A margin is added to these values to facilitate visibility. The Y width is always greater than Y active signal precision.
-=====X scale=====
-Changes X scale type of the area to the selected type. Available types (according to the kind of the area) are:
-* Linear
-* Logarithmic
-=====Y scale=====
-Changes Y scale type of the area to the selected type. Available types (according to the kinds of the area and the window) are:
-* Linear
-* Logarithmic
-* DB
-=====Z scale=====
-Changes Z scale type of the area to the selected type. Available types (according to the kinds of the area and the window) are:
-* Linear
-* Logarithmic
-* dB
-----
-=====D view=====
-There are 4 different views only available in 3D Waterfall areas..
-. 3D isometric
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_05.png|framed|none]]
-. 3D perspective:
-. Freq/Time Colormap:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_06.png|framed|none]]
-. Time/Freq Colormap:
-The 3D aspect can be swapped any time using the ''Display/Graps'' tab and ''3D'' group
-----
-=====Marker manager=====
-Gives the list of all the markers in the window, except record markers. In this dialog box, any window marker can be removed or modified.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_24.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_25.png|framed|none]]
-* '''Select All:''' Checks all the items of the list
-* '''Unselect All:''' Uncheck all the items of the list.
-* '''Remove:''' Removes all checked markers from the window
-* '''Properties:''' Displays the properties dialog of the active marker of the list.
-----
-=====User marker manager=====
-This dialog is only available for the Monitoring and Compressed windows. It contains the list of all record markers of the record signal opened. In the monitoring window, each record marker comment can be modified. In the compressed window, comments cannot be modified.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_26.png|framed|none]]
+===Graph===
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_27.png|framed|none]]
+A graph displays computed traces. It can be multi-trace or multi-graph.
-=====Reset Min & Max=====
+====Graph type====
-Restores min and max values for the selected scale
+=====Time =====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_28.png|framed|none]]
-====Window menu====
-=====Display=====
-In each window, several display modes are available, depending on the graph type.
-{|border="2" cellspacing="0" cellpadding="4" width="91%" align="center"
-|'''Graph type '''
-|'''Display mode'''
-|-
-|Time signal
-|Multi-trace<br>Multi-graph<br>Time multi-trace 3D
-|-
-|Spectral
-|Magnitude<br>Phase Real part<br>Imaginary part<br>Magnitude/Phase<br>Real/Imaginary<br>Polar Real part 3D<br>Imaginary part 3D<br>Magnitude 3D<br>Phase 3D<br>Real part multi-graph <br>Imaginary part multi-graph<br>Magnitude multi-graph<br>Phase multi-graph <br>Merged magnitude/phase
-|-
-|Nth Octave
-|Multi-trace<br>Multi-graph
-|-
-|Viewmeter/Monitoring
-|Continuous<br>Viewmeter<br>Brick<br>Digital<br>Digital magnitude & phase
-|-
-|Waterfall
-|Magnitude<br>Phase<br>Real part<br>Imaginary part
-|-
-|Monitoring/Compressed signal
-|Multi-graph (Only one mode available)
-|-
-|Profile
-|Multi-trace<br>Multi-graph
-|-
-|Complex profile
-|Magnitude<br>Phase Real part<br>Imaginary part<br>Magnitude/Phase<br>Real/Imaginary<br>Real part multi-graph<br>Imaginary part multi-graph<br>Magnitude multi-graph<br>Phase multi-graph <br>Merged magnitude/phase
-|-
-|Lissajoux
-|Multi-trace (Only one mode available)
-|-
-|Constant Band Tracking
-|Magnitude<br>Phase<br>Real part<br>Imaginary part<br>Magnitude/Phase<br>Real/Imaginary<br>Real part multi-graph<br>Imaginary part multi-graph<br>Magnitude multi-graph<br>Phase multi-graph <br>Merged magnitude/phase
-|}<br clear="all">
-* '''Multi-trace: '''This mode displays all window traces of the same type in one graph. In several window types, two multi-trace graphs are displayed in the same window: for example, one for the Real part and one for the imaginary part. In this mode, a''' magnitude gathering mode''' can be activated in the set preferences window: this mode displays signals by creating one area for each Y magnitude included in the window. If two or more signals have the same Y magnitude, they will be displayed in the same area.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_29.png|framed|none]]
-* '''Multi-graph: '''This mode displays one graph per trace in the window.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_30.png|framed|none]]
-* '''Multi-trace 3D: '''This mode displays all traces in the same 3D graph.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_31.png|framed|none]]
-* '''Real part: '''This mode displays the real part of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_32.png|framed|none]]
-* '''Imaginary part: '''This mode displays the imaginary part of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_33.png|framed|none]]
-* '''Magnitude: '''This mode displays the magnitude of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_34.png|framed|none]]
-* '''Phase: '''This mode displays the phase of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_35.png|framed|none]]
-* '''Merged magnitude/phase: '''This mode displays the magnitude and the phase of the signal in the same area. This is a multi-trace mode. The module scale is on the left of the graph and the phase scale is on the right.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_36.png|framed|none]]
-=====Properties=====
-See "Graph type" topic p 37.
-* Always on top: the window will be on top
-* Default: reset the all the settings to the default settings
-* Apply to: applies the settings either to All windows or just for the Active window
-* Save as user preferences: save the properties settings
-=====Active trace=====
-Select the active trace of the window. When the signal changes, the Y scale is updated to the Y magnitude of the signal. Only signals with the same Y magnitude as the active signal are displayed. The others are displayed as unavailable in the info-trace.
-The color of the cursor corresponds with the trace<nowiki>’</nowiki>s color; you can select in the infotrace the active trace and its linked cursor using arrays of the keyboard.
-=====Remove trace=====
-Removes selected trace from the window. If this trace is the active one, the active signal is changed. A trace can be removed using <nowiki>’</nowiki>Ctrl suppr<nowiki>’</nowiki>.
-=====Memorize trace=====
-Memorizes the active trace of the active window at any time (independently from Run and Stop event).
-The memorized trace is named ''Memx: active trace name.  ''There<nowiki>’</nowiki>s an incrementation of the memorized traces id (x). You can save the memorized traces by adding it to the result selection.
-<font color="#FF0000">
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_37.png|framed|none]]
-</font>'''Note''': you can memorize an active trace by using the insert button of the keyboard.
-=====Clear memory=====
-Clear all memorized traces. You can remove specific memorized traces with the <nowiki>’</nowiki>Remove trace<nowiki>’</nowiki> command.
-=====AutoMemorize=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_38.png|framed|none]]
-<nowiki>’</nowiki>AutoMemorize<nowiki>’</nowiki> traces consists in memorizing traces on the stop event. Select the graph to be memorized.
-By using an operator on an active trace and his associated memorized traces is available by right-clicking on the graphs and selecting <nowiki>’</nowiki>operators<nowiki>’</nowiki>. This operator will be automatically updated if a memorized trace is added or deleted (see also operators).
-During a multi-run, the average on automatic memorized trace is done automatically for each run, and the average trace is automatically updated.
-=====Auto scale Y on all=====
-Sets min and max values of the Y scale to the Y min and max values of all signals displayed in the graph. A margin is added to these values to facilitate visibility. The Y width is always more than Y active signal precision.
-=====Cascade view=====
-Present the current active trace in a cascade view of the last 50 (default value) recovered results.
-This is dedicated for monitoring used, this is not a waterfall (acquisition mode in real-time). The Z-axis represents the number of slices independently from any reference such as time or RPM evolution.
-This function is available only for 2D spectra and trigger blocks.
-'''Warning''': if you are in manual trigger, or if there is an absence in the time, you won<nowiki>’</nowiki>t be able to notice it with the cascade view. In the following example, a pause has been made during the measurement; on the waterfall 3Dview (with time for reference) it is possible to see this pause. In the cascade view the pause won<nowiki>’</nowiki>t be noticed (number of block for reference).
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_39.png|framed|none]]
-=====Integrate/Differentiate=====
-These commands are available only for results with an X-Axis that represents frequency lines. The operations are performed in the spectral domain.
-* '''Normal: '''No operation is performed on the data
-* '''dt: '''The result is integrated, so that acceleration becomes velocity. The formula used is:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_40.png|framed|none]]
-* '''dt²: '''The result is integrated twice, so that acceleration becomes displacement. The formula used is:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_41.png|framed|none]]
-* '''dx/dt: '''The result is derived, so that velocity becomes acceleration. The formula used is:
-val_dx/dt = val
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_42.gif|framed|none]]
-(j()
-* '''dx/dt²: '''The result is derived twice, so that displacement becomes acceleration. The formula used is:
-val_dx/dt2 = val
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_43.gif|framed|none]]
-(j()²
-=====Unit=====
-These commands are available only for results with an X-Axis that represents frequencies. The operations are performed in the spectral domain
-* '''RMS: '''Provides the RMS (EU) value. This is the default unit.
-* '''Peak: '''It is based on a sine signal, and therefore equal to 1.414 times the RMS value.
-* '''Peak-Peak: '''It is based on a sine signal, and therefore equal to 2.828 times RMS value.
-* '''EU²: '''Means Square value.
-* '''PSD (EU²/Hz): '''Calculates the Power Spectral Density of the result. The formula used is:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_44.png|framed|none]]
-Where ENBW is the Equivalent Noise Band Width that takes into account the weighting windows (1 for Rectangular, 1.5 for Hanning, 1.36 for Hamming, 3.77 for Flat top) and ''val'' the RMS value.
-* '''ESD (EU²/Hz²): '''Calculates the Energy Spectral Density of the result. The formula used is:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_45.png|framed|none]]
-Where ENBW is the Equivalent Noise Band Width that takes into account the weighting windows (1 for Rectangular, 1.5 for Hanning, 1.36 for Hamming, 3.77 for Flat top) and ''val'' the RMS value.
-* '''RMS PSD (EU/Hz'''<sup>'''1/2'''</sup>'''): '''Calculates the RMS Power Spectral Density of the result. The formula used is:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_46.png|framed|none]]
-Where ENBW is the Equivalent Noise Band Width that takes into account the weighting windows (1 for Rectangular, 1.5 for Hanning, 1.36 for Hamming, 3.77 for Flat top) and ''val'' the RMS value.
-=====Weighting=====
-These commands are available only for results with an X-Axis that represents frequencies. The operations are performed in the spectral domain
-* '''None: '''No weighting is applied.
-* '''A Weighting: '''Selects the "A" weighting
-* '''More: '''Used to select specialized weighting
-<br>See more details about Weightings in chapter "Appendix 2, Weighting Windows and Filters".
-=====Operators=====
-Operators are used to perform calculations using various results. All kind of operators (Arithmetic average, Quadratic average, Linear comparison or dB comparison) is available for any type of results
-* '''Arithmetic average: '''This dialog box is designed to create a new result which is the arithmetic average of several results. This average can be calculated only for results that are in the same window. They must also have the same x-Axis definition.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_47.png|framed|none]]
-The formula of the calculated result is:<br>
-'''Average_Result = Q
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_48.gif|framed|none]]
-(C1
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_49.gif|framed|none]]
-Result_1 <nowiki>+</nowiki> C2
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_50.gif|framed|none]]
-Result_2 <nowiki>+</nowiki> ... <nowiki>+</nowiki> Cn
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_51.gif|framed|none]]
-Result_n)'''
-The default values of C1, C2...Cn are 1 and the default value of Q is (C1<nowiki>+</nowiki>C2<nowiki>+</nowiki>...<nowiki>+</nowiki>Cn)/n, but all these coefficients can be modified.
-To set the C_i coefficient, fill in the "Coef" value and then add one or several results with the button
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_52.jpg|framed|none]]
-.
-To set the Q coefficient, add up all results, check the box below "Operation result", and enter the value.
-* '''Quadratic average: '''This dialog box is designed to create a new result, which is the quadratic average of several results. This average can be calculated only for results that are in the same window. They must also have the same x-Axis definition.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_53.png|framed|none]]
-The formula of the calculated result is:
-'''Average_Result = Q
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_54.gif|framed|none]]
-<nowiki>[</nowiki>(C1
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_55.gif|framed|none]]
-Result_1² <nowiki>+</nowiki> C2
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_56.gif|framed|none]]
-Result_2² <nowiki>+</nowiki> ... <nowiki>+</nowiki> Cn
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_57.gif|framed|none]]
-Result_n²)<nowiki>]</nowiki>½'''
-The default values of C1, C2...Cn are 1 and the default value of Q is 1, but all these coefficients can be modified.
-To set the C_i coefficient, fill in the "Coef" value and then add one or several results with the button
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_58.jpg|framed|none]]
-.
-To set the Q coefficient, add up all your result, check the box below "Operation result", and enter the value.
-* '''Linear comparison: '''This dialog box is designed to create a new result, which is the comparison of 2 results. This operation can be calculated only for results that are in the same window. They must also have the same x-Axis definition.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_59.png|framed|none]]
-The formula of the calculated result is:
-'''Comp_Result = Q
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_60.gif|framed|none]]
-(Result_1-Result_2)'''
-The default value of Q is 1, but all of these coefficients can be modified.
-* '''dB comparison: '''This dialog box is designed to create a new result, which is the comparison of two results. The comparison is made so that the result shows the difference between the two results in dB. It corresponds to the calculation of the ratio between the two results. This operation can be performed only on results that are in the same window. They must also have the same x-Axis definition.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_61.png|framed|none]]
-The formula of the calculated result is:
-'''Comp_Result = Q
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_62.gif|framed|none]]
-(Result_1/Result_2)'''
-The default value of Q is 1, but all of these coefficients can be modified.
-=====Add to Result selection=====
-This command adds all the results displayed in the window to the list of results that must be saved in a measurement. If the result is already on the list, it is not added. Some results displayed cannot be saved (Instant trigger of the front end, profile of a DC input).
-=====Copy graph(s)=====
-This command copies the active graph in the format <nowiki>’</nowiki>wmf<nowiki>’</nowiki>, this command is not available for 3D Waterfall.
-=====Copy bitmap=====
-This command copies graph in the format <nowiki>’</nowiki>.bmp<nowiki>’</nowiki>
-=====Copy data=====
-This command copies data in order to export them in Excel. This will export all point<nowiki>’</nowiki>s values from the active graph. NVGate export values with a point as separator and in engineer mode. This command is available for all spectra and profiles (even waterfall profiles).
-If the graph is displayed with complex values, then the <nowiki>’</nowiki>copy data<nowiki>’</nowiki> command allows to export phase and module values.
-Example:
-* Natural values:
-Values displayed are values from the Active trace:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_63.png|framed|none]]
-* Complex values:
-For complex values the <nowiki>’</nowiki>Copy data<nowiki>’</nowiki> will displayed phase and module values.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_64.png|framed|none]]
-=====Copy to Mask=====
-Adds the result to the project template results. This result is then available for editing and use as a template.
-=====Add Alarm=====
-Dialog box to create an alarm. An alarm compares a dynamic signal with a template result. The result of the comparison can be used in the macro to perform certain tests.
-To make this option available, a result template must be added to the window (using drag & drop for example).
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_65.png|framed|none]]
-Go to the "Chapter 5: Tools" to see more details about the Result template.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_66.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_67.png|framed|none]]
-To create an alarm, select a result from the top list, a template from the bottom list and click the Add button. The list on the right displays a list of the existing alarms.
-----
-=====Waterfall window menu=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_68.png|framed|none]]
-* '''Add section: '''Creates a new section at the current position of the cursor. The extraction section is created only if a tach has been selected in the Waterfall.
-* '''Select YZ section: '''Selects the active trace in the YZ graph. Useful to get the value of the cursor for this section
-* '''Select XY section: '''Selects the active trace in the XY graph. Useful to get the value of the cursor for this section
-* '''Select extraction section: '''Selects the active trace in the extraction graph. Useful to get the value of the cursor for this section
-* Section manager: This dialog box is used to create and modify sections.
-To modify a section, select the desired type and the desired section then modify the Section properties and click "Apply".
-To create a new section, Select the type, set the desired properties and click "Add"
-To remove a section, select the desired type and the desired section, then click "Remove".
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_01.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_69.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_70.png|framed|none]]
-* Section properties: The XPos, ZPos, Freq or Order defines the position of the section in the Waterfall.
-When the "Advanced" box is checked, it defines the center of the band.
-The width is used when the "Advanced" box is checked. It defines the bandwidth.
-The advanced sections are:
-{|border="2" cellspacing="0" cellpadding="4" width="91%" align="center"
-|Type
-|Sections
-|Type of result
-|Description
-|-
-|Power
-|YZ, Order and Frequency extraction sections
-|Frequency, order and octave spectra
-|Calculates the power within the band
-|-
-|Peak
-|YZ, Order and Frequency extraction sections
-|Frequency, order and octave spectra
-|Detects the highest value
-|-
-|RMS
-|YZ sections
-|Triggered and resampled block
-|Calculates the RMS value within the band
-|-
-|Average
-|YZ sections
-|Triggered and resampled block
-|Calculates the average value within the band
-|-
-|Min
-|YZ sections
-|Triggered and resampled block
-|Detects the minimum value within the band
-|-
-|Max
-|YZ sections
-|Triggered and resampled block
-|Detects the maximum value within the band
-|}<br clear="all">
-* ''Z-Operator'':
-This Operator is available on XY extraction view and 3 operators are available: Min, Max and Arithmetic Average.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_71.png|framed|none]]
-* ''Order Extraction'':
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_02.png|framed|none]]
-{|border="0" cellspacing="2" width="100%"
-|&nbsp;
-|&nbsp;
-|&nbsp;
-|}
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_72.png|framed|none]]
-This Operator take data spectrum by spectrum, for each spectrum there is a determination of the max value and of the corresponding order.
-Using this operator it is possible to detect on which orders it is useful to work.
-Note: The Max Order cannot be saved in result (not available in the <nowiki>’</nowiki>Add to result selection<nowiki>’</nowiki>).
-* View: Displays all the views or only one of the three or four available views (sections, 3D)
-* Z auto scale: Adjusts the Z-scale to the current range of the selected reference
-* Select reference: Reference used for the Z-Axis
-* Select tach: Selection of the tach that is used for the order or frequency extraction
-* Add to result selection: Check the Waterfall box to add the Waterfall to the result selection.
-Check the section that must be added to the result selection. These sections will be saved as individual results (spectra, trigger blocks...)
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_73.png|framed|none]]
-The orientation of the 3D view of the waterfall can be modified by using the rotation button
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_74.png|framed|none]]
-.
-<font color="#FF0000">
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_75.png|framed|none]]
-</font>A threshold is available on a waterfall by pressing the <nowiki>’</nowiki>y<nowiki>’</nowiki> button (or <nowiki>’</nowiki>ctrl y<nowiki>’</nowiki> for more precision).
-<font color="#FF0000">
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_76.png|framed|none]]
-</font>
-===Graph type===
-====Time ====
 Time graphs display time real signals.
-=====Source signals (plug-in/process)=====
+'''Source signals (plug-in/process)'''<br>
 The following results may be displayed as time graphs:
@@ Line 727: / Line 140: @@
 * SOA x: Triggered block, weighted block.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_77.gif|framed|none]]
+[[Image:Display_Graphs_Traces_77.gif|450px|none]]
-=====Properties=====
+'''Properties'''<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_78.png|framed|none]]
+[[Image:Display_Graphs_Traces_78.png|450px|none]]
-* X-Axis
+* '''X-Axis:'''
-* Linear: uses linear scale for X-axis units.
+:-'''Linear:''' uses linear scale for X-axis units.
-* Y-Axis
+* '''Y-Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Logarithmic: uses logarithmic scale for Y-axis units.
+:-'''Logarithmic:''' uses logarithmic scale for Y-axis units.
-* Display mode
+* '''Display mode'''
-* Multi-graph: overlays all traces using one graph per trace on the same window.
+:-'''Multi-graph:''' overlays all traces using one graph per trace on the same window.
-* Multi-trace: overlays all traces in one graph.
+:-'''Multi-trace:''' overlays all traces in one graph.
-* Multi-trace 3D: overlays all traces in one 3D graph.
+:-'''Multi-trace 3D:''' overlays all traces in one 3D graph.
-* Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
+:-'''Magnitude gathering:''' if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-* Trace color
+* '''Trace color'''
-* Number: selects the trace number for color modification.
+:-'''Number:''' selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
-* The bottom of the area if Y scale is a dB one or Logarithmic one
+:: The bottom of the area if Y scale is a dB one or Logarithmic one,
-* The 0 value if the Y scale is linear.
+:: The 0 value if the Y scale is linear.
-----
+=====Spectral =====
-====Spectral ====
 Spectral graphs display narrow band (complex) spectra.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as spectral graphs:
@@ Line 762: / Line 173: @@
 * Sync. order x: Ord. inst. spectrum, Ord. avg. spectrum, Ord. spectrum.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_79.gif|framed|none]]
+[[Image:Display_Graphs_Traces_79.gif|450px|none]]
-----
-=====Properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_80.png|framed|none]]
-* X Axis
-* Linear: uses linear scale for X-axis units.
-* Logarithmic: uses logarithmic scale for X-axis units.
-* Y Axis
-* Linear: uses linear scale for Y-axis units.
-* Logarithmic: uses logarithmic scale for Y-axis units.
-* dB: uses reference dB scale for Y-axis units.
-* Display mode
-* Magnitude: overlays all magnitude traces on a single graph.
-* Phase: overlays all phase traces on a single graph.
-* Real part: overlays all real parts traces on a single graph.
-* Imaginary part: overlays all imaginary part traces on a single graph.
-* Magnitude/phase: overlays all magnitude traces on the upper graph and all the phase traces on the lower graph.
-* Real/imaginary: overlays all magnitude traces on the upper graph and all the phase traces on the lower graph.
-* Polar: overlays all complex traces on a polar graph:  = magnitude,  = phase.
-* Real part 3D: displays all real part traces as a 3D graph arranged along the Z-axis.
-* Imaginary part 3D: displays all imaginary part traces as a 3D graph arranged along the Z-axis.
-* Magnitude 3D: displays all magnitude traces as a 3D graph arranged along the Z-axis.
-* Phase 3D: displays all phase traces as a 3D graph arranged along the Z-axis.
-* Real part multi-graph: displays all real part traces using one graph per trace in the same window.
-* Imaginary part multi-graph: displays all imaginary part traces using one graph per trace in the same window.
-* Magnitude multi-graph: displays all magnitude traces using one graph per trace in the same window.
-* Phase multi-graph: displays all phase traces using one graph per trace in the same window.
-* Phase/Magnitude: overlays all phase traces on the upper graph using 1/3 of window space and all the magnitude traces on the lower graph using 2/3 of the window.
-* Merged Magnitude/Phase: displays all magnitude and phase part traces as a unique graph.
-* Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-* Trace color
-* Number: selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
-* the bottom of the area if Y scale is a dB one or Logarithmic one
-* the 0 value of the Y scale is linear.
-* Dynamics
-* 90 dB: resizes the Y-axis to 90 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 110 dB: resizes the Y-axis to 110 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 130 dB: resizes the Y-axis to 130 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 150 dB: resizes the Y-axis to 150 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-----
+'''Properties'''<br>
-Phase
+[[Image:Display_Graphs_Traces_80.png|450px|none]]
-* -180° -<nowiki>></nowiki> 180°: sets the phase graph Y-axis between –180° to <nowiki>+</nowiki>180°.
+* '''X Axis:'''
+:-'''Linear:''' uses linear scale for X-axis units.
+:-'''Logarithmic:''' uses logarithmic scale for X-axis units.
+* '''Y Axis:'''
+:-'''Linear: uses linear scale for Y-axis units.
+:-'''Logarithmic: uses logarithmic scale for Y-axis units.
+* '''dB:''' uses reference dB scale for Y-axis units.
+* '''Display mode'''
+:-'''Magnitude:''' overlays all magnitude traces on a single graph.
+:-'''Phase:''' overlays all phase traces on a single graph.
+:-'''Real part:''' overlays all real parts traces on a single graph.
+:-'''Imaginary part:''' overlays all imaginary part traces on a single graph.
+:-'''Magnitude/phase:''' overlays all magnitude traces on the upper graph and all the phase traces on the lower graph.
+:-'''Real/imaginary:''' overlays all magnitude traces on the upper graph and all the phase traces on the lower graph.
+:-'''Polar:''' overlays all complex traces on a polar graph:  = magnitude,  = phase.
+:-'''Real part 3D:''' displays all real part traces as a 3D graph arranged along the Z-axis.
+:-'''Imaginary part 3D:''' displays all imaginary part traces as a 3D graph arranged along the Z-axis.
+:-'''Magnitude 3D:''' displays all magnitude traces as a 3D graph arranged along the Z-axis.
+:-'''Phase 3D:''' displays all phase traces as a 3D graph arranged along the Z-axis.
+:-'''Real part multi-graph:''' displays all real part traces using one graph per trace in the same window.
+:-'''Imaginary part multi-graph:''' displays all imaginary part traces using one graph per trace in the same window.
+:-'''Magnitude multi-graph:''' displays all magnitude traces using one graph per trace in the same window.
+:-'''Phase multi-graph:''' displays all phase traces using one graph per trace in the same window.
+:-'''Phase/Magnitude:''' overlays all phase traces on the upper graph using 1/3 of window space and all the magnitude traces on the lower graph using 2/3 of the window.
+:-'''Merged Magnitude/Phase:''' displays all magnitude and phase part traces as a unique graph.
+:-'''Magnitude gathering:''' if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_81.png|framed|none]]
+* '''Trace color:'''
+:-'''Number:''' selects the trace number for color modification.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
+::the bottom of the area if Y scale is a dB one or Logarithmic one,
+::the 0 value of the Y scale is linear.
+* '''Dynamics:'''
+:-'''90 dB:''' resizes the Y-axis to 90 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''110 dB:''' resizes the Y-axis to 110 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''130 dB:''' resizes the Y-axis to 130 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''150 dB:''' resizes the Y-axis to 150 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 0 -<nowiki>></nowiki> 360°: sets the phase graph Y-axis between 0 to <nowiki>+</nowiki>360°.
+* '''Phase:'''
+:-''' -180° -<nowiki>></nowiki> 180°:''' sets the phase graph Y-axis between –180° to <nowiki>+</nowiki>180°.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_82.png|framed|none]]
+[[Image:Display_Graphs_Traces_81.png|400px|none]]
-*
+:-'''0 -<nowiki>></nowiki> 360°:''' sets the phase graph Y-axis between 0 to <nowiki>+</nowiki>360°.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_83.gif|framed|none]]
-Rotations: sets the number of rotations to be displayed on the Y-axis.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_84.png|framed|none]]
+[[Image:Display_Graphs_Traces_82.png|400px|none]]
-Example for 5 rotations
+* '''Rotations:''' sets the number of rotations to be displayed on the Y-axis.
-----
+[[Image:Display_Graphs_Traces_84.png|400px|none]]
-====Lissajous ====
+=====Lissajous=====
 Parametric graph of one triggered block with another one for reference.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed into Lissajous graphs:
-* FFT x: Lissajous.
+* '''FFT x: Lissajous'''.
 <font color="#FF0000">
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_85.png|framed|none]]
+[[Image:Display_Graphs_Traces_85.png|framed|none]]
 </font>The perimeter of the Lissajous corresponds of the FFT length<nowiki>’</nowiki>s block.
@@ Line 845: / Line 245: @@
 You can use filters on this kind of graph, as integration or a double integration.
-=====Properties=====
+'''Properties'''<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_86.png|framed|none]]
+[[Image:Display_Graphs_Traces_86.png|framed|none]]
-* X Axis
+* '''X Axis:'''
-* Linear: uses linear scale for X-axis units.
+:-'''Linear:''' uses linear scale for X-axis units.
-* Y Axis
+* '''Y Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Display mode
+* '''Display mode:'''
-* Multi-trace: overlays all traces on a single graph.
+:-'''Multi-trace:''' overlays all traces on a single graph.
-* Trace color
+* '''Trace color:'''
-* Number: selects the trace number for color modification.
+:-'''Number:''' selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Orthonormal view: if checked, the graph is displayed in an orthonormal area.
+:-'''Orthonormal view:''' if checked, the graph is displayed in an orthonormal area.
 ----
-====Nth octave====
+=====Nth octave=====
 Displays nth octave band graph.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as nth octave graphs:
 * Nth-Octave: 1/n octave, Avg 1/n octave.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_87.png|framed|none]]
+[[Image:Display_Graphs_Traces_87.png|450px|none]]
-=====Properties=====
+'''Properties'''<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_88.png|framed|none]]
+[[Image:Display_Graphs_Traces_88.png|500px|none]]
-* Y Axis
+*'''Y Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Logarithmic: uses logarithmic scale for Y-axis units.
+:-'''Logarithmic:''' uses logarithmic scale for Y-axis units.
-* dB: uses reference dB scale for Y axis units.
+:-'''dB:''' uses reference dB scale for Y axis units.
-* Display mode
+*'''Display mode'''
-* Bar: bar representation
+:-'''Bar:''' bar representation
-* Step: step representation.
+:-'''Step:''' step representation
-* Rectangle: overlaid rectangle
+:-'''Rectangle:''' overlaid rectangle
-* Filled: overlaid filled rectangles.
+:-'''Filled:''' overlaid filled rectangles.
-* Display mode
+*'''Display mode'''
-* Multi-trace: overlays all traces on a single graph.
+:-'''Multi-trace:''' overlays all traces on a single graph.
-* Multi-graph: one graph for each trace.
+:-'''Multi-graph:''' one graph for each trace.
-* Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
+:-'''Magnitude gathering:''' if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-* Trace color
+*'''Trace color'''
-* Number: selects the trace number for color modification.
+:-'''Number:''' selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Overall level
+*'''Overall level'''
-* Linear: if checked, the linear global level is displayed.
+:-'''Linear:''' if checked, the linear global level is displayed.
-* Weighted: if checked and available, the weighted level is displayed.
+:-'''Weighted:''' if checked and available, the weighted level is displayed.
-* Frequencies
+* '''Frequencies:'''
-* Exact: displays exact band center frequency.
+:-'''Exact:''' displays exact band center frequency.
-* Preferred: displays preferred frequencies, i.e rounded values for the central frequencies. Preferred frequencies are only available for octave and 1/3rd octave windows: in the octave. If this mode is selected in 12th and 24th octave windows, exact frequencies are displayed.
+:-'''Preferred:''' displays preferred frequencies, i.e rounded values for the central frequencies. Preferred frequencies are only available for octave and 1/3rd octave windows: in the octave. If this mode is selected in 12th and 24th octave windows, exact frequencies are displayed.
-* Dynamics
+* '''Dynamics:'''
-* 90 dB: resizes the Y-axis to 90 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''90 dB:''' resizes the Y-axis to 90 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 110 dB: resizes the Y-axis to 110 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''110 dB:''' resizes the Y-axis to 110 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 130 dB: resizes the Y-axis to 130 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''130 dB:''' resizes the Y-axis to 130 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 150 dB: resizes the Y-axis to 150 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''150 dB:''' resizes the Y-axis to 150 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
 ----
+=====Viewmeter=====
-====Viewmeter====
 Displays scalar value graphs.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as nth viewmeter graphs:
@@ Line 922: / Line 320: @@
 * Tachometer: Angular speed
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_89.gif|framed|none]]
+[[Image:Display_Graphs_Traces_89.gif|400px|none]]
-----
-=====Properties=====
+'''Properties'''<br>
 This page defines the way in which the scalar results are displayed.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_90.png|framed|none]]
+[[Image:Display_Graphs_Traces_90.png|400px|none]]
-* Display mode: There are two types of display:
+* '''Display mode:''' There are two types of display:
-* Bar graph
+:-'''Bar graph:'''
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_04-display.png|framed|none]]
+[[Image:Display_Graphs_Traces_04-display.png|400px|none]]
-* Digital display
+:-'''Digital display'''
-* Y Axis
+* '''Y Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Logarithmic: uses logarithmic scale for Y-axis units.
+:-'''Logarithmic:''' uses logarithmic scale for Y-axis units.
-* dB: uses reference dB scale for Y-axis units.
+:-'''dB:''' uses reference dB scale for Y-axis units.
-* Display max, Display min: Displays the min and the max scalar value as a cursor. The color of the cursor can be freely selected. This property only applies to bar graphs.
+* '''Display max, Display min:''' Displays the min and the max scalar value as a cursor. The color of the cursor can be freely selected. This property only applies to bar graphs.
-* Display low level: Changes the color of the display when the value is below this level. The color can be freely selected.
+* '''Display low level:''' Changes the color of the display when the value is below this level. The color can be freely selected.
-* Display high level: Changes the color of the display when the value is higher than this level. The color can be freely selected.
+* '''Display high level:''' Changes the color of the display when the value is higher than this level. The color can be freely selected.
-* Display alarm level: Changes the color of the display when the value is higher than this level. The color can be freely selected.
+* '''Display alarm level:''' Changes the color of the display when the value is higher than this level. The color can be freely selected.
-* Brick height: Defines the height of the bricks for the viewmeter and brick display modes.
+* '''Brick height:''' Defines the height of the bricks for the viewmeter and brick display modes.
-* Save as user preference: When this box is checked, the value is given as a percentage of the full scale, and may be applied to any graph.
+* '''Save as user preference:''' When this box is checked, the value is given as a percentage of the full scale, and may be applied to any graph.
-----
+=====Monitoring=====
-====Monitoring====
 Displays compressed signal graph during recording.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as nth monitoring graphs:
 * Recorder: monitoring signal
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_91.png|framed|none]]
+[[Image:Display_Graphs_Traces_91.png|400px|none]]
-=====Properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_92.png|framed|none]]
+'''Properties'''<br>
-* Trace color
+[[Image:Display_Graphs_Traces_92.png|500px|none]]
-* Number: selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
-* X Axis
+* '''Trace color'''
-* Absolute time: displays the time from windows format.
+:-'''Number:''' selects the trace number for color modification.
-* Relative time: displays the duration of the record. The beginning of the record is set to 0.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Auto:  selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.
-* Y Autoscale
+* '''X Axis'''
-* Continuous:  the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.
+:-'''Absolute time:''' displays the time from windows format.
-* Disabled: Y autoscale is not activated.
+:-'''Relative time:''' displays the duration of the record. The beginning of the record is set to 0.
+:-'''Auto:'''  selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.
+* '''Y Autoscale:'''
+:-'''Continuous:'''  the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.
+:-'''Disabled:''' Y autoscale is not activated.
-====Compressed signal====
+=====Compressed signal=====
 Displays compressed recorded signal graphs.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as nth compressed signal graphs:
 * Zoomed signal
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_93.png|framed|none]]
+[[Image:Display_Graphs_Traces_93.png|framed|none]]
 This kind of zoom can be done by <nowiki>’</nowiki>drag & drop<nowiki>’</nowiki> the selected zone you want to analyze.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_94.png|framed|none]]
+[[Image:Display_Graphs_Traces_94.png|framed|none]]
-After displaying the zoomed signal, on the recorded signal you can modify your zoom at any time. All change would be displayed automatically in the zoomed signal as soon as you modified your zoomed zone.
-=====Properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_95.png|framed|none]]
-* Trace color
-* Number: selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
-* X Axis
-* Absolute time: displays the time from windows format.
-* Relative time: displays the duration of the record. The beginning of the record is set to 0.
-* Auto:  selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.
-==== Time View====
-Based on the previous "Compressed signal" display, the "Time view" is used for the TDA
-=====Source Signals=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_96.png|framed|none]]
-The time view is an oscilloscope-like viw of the Time Domain series which scrolls the signal on a user define duration
-The X axis can be either absolute (real date / time) or relative (in buffer duration). It can be changed during acquisition. The default tyoe is relative.
-It<nowiki>’</nowiki>s possible to display several TDA channels in same window even if the durations are different. The windows size will be set according to the larger duration.
-X zoom is not available at Time View, display is fixed to multi graph.
+After displaying the zoomed signal, on the recorded signal you can modify your zoom at any time. All changes would be displayed automatically in the zoomed signal as soon as you modified your zoomed zone.
-This window handles 3 curors:
+'''Check record'''<br>
+Check record function is for '''verifying the signal data in details just after its acquisition'''. When NVGate records a signal, the save window proposes to display the zoom signal view of the saved measurement. The signal is displayed after closing the window with OK.
-* Main cursor where is retrieved the values displayed at infortrace
+[[Image:V11_release_24.png|framed|none]]
-* Cursors 1-2 used for selection. The scalar values displayed in the info trace are computed according to this selection.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_97.png|framed|none]]
+It is then possible to:
-Scalar table may be setup to add / remove scalar that may be displayed:
-Content of Scalar Table could be copy to export to another application.
-{|border="0" cellspacing="2" width="100%"
-|
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_98.png|framed|none]]
-|&nbsp;
+* '''Zoom into the signal''' by drag & dropping on the graph
+* '''Listen to the tracks''' through the PC loudspeaker by clicking on the loudspeaker icon. Select the listened track with the up/down arrows.
-|}
+'''Properties'''
-=====Properties=====
+[[Image:Display_Graphs_Traces_95.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_99.png|framed|none]]
+* '''Trace color'''
+:- '''Number''': selects the trace number for color modification.
+:- '''Color box''': click on this box to modify the color of the selected trace.
-* Trace color
+* '''X Axis'''
-* Number: selects the trace number for color modification.
+:- '''Absolute time''': displays the time from windows format.
-* Color box: click on this box to modify the color of the selected trace.
+:- '''Relative time''': displays the duration of the record. The beginning of the record is set to 0.
+:- '''Auto''':  selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.
-* X Axis
+=====Profile=====
-* Absolute time: displays the time from windows format.
-* Relative time: displays the duration of the record. The beginning of the record is set to 0.
-* Auto:  selects absolute or relative time depending on the duration of the record. For records smaller than 2s, the relative time is displayed, for others, the absolute time is chosen.
-====Profile====
 Displays scalar profile.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as nth compressed signal graphs:
 * Monitor: DC, Max, Min, Kurtosis
 *
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_09.png|framed|none]]
+[[Image:Display_Graphs_Traces_09.png|framed|none]]
 Front-end: DC
 * Tachometer: RPM
-----
+'''Properties'''<br>
-=====Properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_100.png|framed|none]]
-* X Axis
+[[Image:Display_Graphs_Traces_100.png|500px|none]]
-* Linear: uses linear scale for X-axis units.
-* Y Axis
-* Linear: uses linear scale for Y-axis units.
-* Display mode
-* Magnitude: overlays all magnitude traces on a single graph.
-* Phase: overlays all phase traces on a single graph.
-* Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-* Trace color
-* Number: selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
-* the bottom of the area if Y scale is dB or Logarithmic.
-* the 0 value if the Y scale is linear.
-* X Autoscale
+* '''X Axis:'''
-* Continuous:  the X scale is automatically adjusted to the current min and max x values of the window traces.
+:-'''Linear:''' uses linear scale for X-axis units.
-* Disabled: X autoscale is not activated.
+* '''Y Axis'''
+:-'''Linear:''' uses linear scale for Y-axis units.
+* '''Display mode'''
+:-'''Magnitude:''' overlays all magnitude traces on a single graph.
+:-'''Phase:''' overlays all phase traces on a single graph.
+:-'''Magnitude gathering:''' if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
+* '''Trace color'''
+:-'''Number:''' selects the trace number for color modification.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
+:: the bottom of the area if Y scale is dB or Logarithmic,
+:: the 0 value if the Y scale is linear.
-* Y Autoscale
+* '''X Autoscale:'''
-* Continuous:  the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.
+:-'''Continuous:'''  the X scale is automatically adjusted to the current min and max x values of the window traces.
-* Disabled: Y autoscale is not activated.
+:-'''Disabled:''' X autoscale is not activated.
+* '''Y Autoscale'''
+:-'''Continuous:'''  the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.
+:-'''Disabled:''' Y autoscale is not activated.
-====Complex profile====
+=====Complex profile=====
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as complex profile graphs:
@@ Line 1,105: / Line 460: @@
 * SOA X: Order profile
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_101.gif|framed|none]]
+[[Image:Display_Graphs_Traces_101.gif|400px|none]]
-----
-=====Properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_102.png|framed|none]]
+'''Properties'''<br>
-* X Axis
+[[Image:Display_Graphs_Traces_102.png|500px|none]]
-* Linear: uses linear scale for X-axis units.
-* Y Axis
-* Linear: uses linear scale for Y-axis units.
-* Logarithmic: uses logarithmic scale for Y-axis units.
-* dB: uses reference dB scale for Y axis units.
-* Display mode
-* Magnitude: overlays all magnitude traces on a single graph.
-* Phase: overlays all phase traces on a single graph.
-* Real part: overlays all real part traces on a single graph.
-* Imaginary part: overlays all imaginary part traces on a single graph.
-* Magnitude/phase: overlays all magnitude traces on the upper graph and all phase traces on the lower graph.
-* Real/imaginary: overlays all magnitude traces on the upper graph and all phase traces on the lower graph.
-* Polar: displays in polar coordinates, the phase and the amplitude on a single graph.
-* Real part multi-graph: displays all real part traces using one graph per trace in the same window.
-* Imaginary part multi-graph: displays all imaginary part traces using one graph per trace in the same window.
-* Magnitude multi-graph: displays all magnitude traces using one graph per trace in the same window.
-* Phase multi-graph: displays all phase traces using one graph per trace in the same window.
-* Phase/Magnitude: overlays all phase traces on the upper graph using 1/3 of window space and all the magnitude traces on the lower graph using 2/3 of the window.
-* Merged Magnitude/Phase: displays all magnitude and phase parts traces on a single graph.
-* Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-* Trace color
-* Number: selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
-* The bottom of the area if Y scale is dB or Logarithmic.
-* The 0 value if the Y scale is linear.
-* Dynamics
-* 90 dB: resizes the Y-axis to 90 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 110 dB: resizes the Y-axis to 110 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 130 dB: resizes the Y-axis to 130 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* 150 dB: resizes the Y-axis to 150 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
-* Phase
-* -180° -<nowiki>></nowiki> 180°: sets the phase graph Y-axis between –180° to <nowiki>+</nowiki>180°.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_103.png|framed|none]]
+* '''X Axis:'''
+:-'''Linear:''' uses linear scale for X-axis units.
+*'''Y Axis:'''
+:-'''Linear:''' uses linear scale for Y-axis units.
+:-'''Logarithmic:''' uses logarithmic scale for Y-axis units.
+:-'''dB:''' uses reference dB scale for Y axis units.
+*'''Display mode:'''
+:-'''Magnitude:''' overlays all magnitude traces on a single graph.
+:-'''Phase:''' overlays all phase traces on a single graph.
+:-'''Real part:''' overlays all real part traces on a single graph.
+:-'''Imaginary part:''' overlays all imaginary part traces on a single graph.
+:-'''Magnitude/phase:''' overlays all magnitude traces on the upper graph and all phase traces on the lower graph.
+:-'''Real/imaginary:''' overlays all magnitude traces on the upper graph and all phase traces on the lower graph.
+:-'''Polar:''' displays in polar coordinates, the phase and the amplitude on a single graph.
+:-'''Real part multi-graph:''' displays all real part traces using one graph per trace in the same window.
+:-'''Imaginary part multi-graph:''' displays all imaginary part traces using one graph per trace in the same window.
+:-'''Magnitude multi-graph:''' displays all magnitude traces using one graph per trace in the same window.
+:-'''Phase multi-graph:''' displays all phase traces using one graph per trace in the same window.
+:-'''Phase/Magnitude:''' overlays all phase traces on the upper graph using 1/3 of window space and all the magnitude traces on the lower graph using 2/3 of the window.
+:-'''Merged Magnitude/Phase:''' displays all magnitude and phase parts traces on a single graph.
+:-'''Magnitude gathering:''' if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
+*'''Trace color:'''
+:-'''Number:''' selects the trace number for color modification.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
+::The 0 value if the Y scale is linear.
+*'''Dynamics:'''
+:-'''90 dB:''' resizes the Y-axis to 90 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''110 dB:''' resizes the Y-axis to 110 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''130 dB:''' resizes the Y-axis to 130 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+:-'''150 dB:''' resizes the Y-axis to 150 dB dynamics starting from <nowiki>+</nowiki>20 dBV.
+*'''Phase:'''
+:-'''-180° -<nowiki>></nowiki> 180°:''' sets the phase graph Y-axis between –180° to <nowiki>+</nowiki>180°.
-* 0 -<nowiki>></nowiki> 360°: sets the phase graph Y-axis between 0 to <nowiki>+</nowiki>360°.
+[[Image:Display_Graphs_Traces_103.png|400px|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_104.png|framed|none]]
+:-'''0 -<nowiki>></nowiki> 360°: sets the phase graph Y-axis between 0 to <nowiki>+</nowiki>360°.
-*
+[[Image:Display_Graphs_Traces_104.png|400px|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_105.gif|framed|none]]
-Rotations: sets the number of rotations to be displayed on the Y-axis.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_106.png|framed|none]]
+:-'''Rotations:''' sets the number of rotations to be displayed on the Y-axis. Example for 5 rotations:
-Example for 5 rotations
+[[Image:Display_Graphs_Traces_106.png|400px|none]]
-* X Autoscale
+* '''X Autoscale:'''
-* Continuous:  the X scale is automatically adjusted to the current min and max x values of the window traces.
+:-'''Continuous:'''  the X scale is automatically adjusted to the current min and max x values of the window traces.
-* Disabled: X autoscale is not activated.
+:-'''Disabled:''' X autoscale is not activated.
-* Y Autoscale
+* '''Y Autoscale:'''
-* Continuous:  the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.
+:-'''Continuous:'''  the Y scale is automatically adjusted to the current min and max y values of the window traces with a margin to facilitate visibility.
-*  Disabled: Y autoscale is not activated.
+:-'''Disabled:''' Y autoscale is not activated.
 ----
-====Coherence====
+=====Coherence=====
 Displays coherence graphs.
-=====Source Signals=====
+'''Source Signals:'''<br>
 The following results may be displayed as coherence graphs:
 * FFT X: Coherence
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_107.png|framed|none]]
+[[Image:Display_Graphs_Traces_107.png|framed|none]]
-=====Properties=====
+'''Properties'''<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_108.png|framed|none]]
+[[Image:Display_Graphs_Traces_108.png|500px|none]]
-* X Axis
+*'''X Axis:'''
 * Linear: uses linear scale for X-axis units.
-* Y Axis
+*'''Y Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Display mode
+*'''Display mode:'''
-* Multi-graph: overlays all traces on a single graph.
+:-'''Multi-graph:''' overlays all traces on a single graph.
-* Multi-trace: displays all traces using one graph per trace in the same window.
+:-'''Multi-trace:''' displays all traces using one graph per trace in the same window.
-* Time multi-trace 3D: overlays all traces on a single 3D graph.
+:-'''Time multi-trace 3D:''' overlays all traces on a single 3D graph.
-* Magnitude gathering: if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
+:-'''Magnitude gathering:''' if this mode is activated and when a multi-trace mode is selected, an area is created for each different Y magnitude: all the signals with the same Y magnitude are in the same area. If there is only one different Y magnitude, all the signals are in the same area.
-* Trace color
+*'''Trace color:'''
-* Number: selects the trace number for color modification.
+:-'''Number:''' selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
-* the bottom of the area if Y scale is dB or Logarithmic.
+::the bottom of the area if Y scale is dB or Logarithmic,
-* the 0 value if the Y scale is linear.
+::the 0 value if the Y scale is linear.
-====Shaft View====
+=====Shaft View=====
 The shaft view or "marguerite" shows the trigger block of FFTs and SOA around one revolution. This graph includes angular cursors (with delta-angle) useful for reading the location of peaks.
 Note that in order to provide a stable trace, the corresponding plug-in must be triggered by a keyphasor. This keyphasor (any edge event) being the phase reference of each revolution. In the case of synchronous order analysis, the plug-in is automatically triggered on the tach. pulses.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_109.png|framed|none]]
+[[Image:Display_Graphs_Traces_109.png|framed|none]]
-The shaft view shows the first entire revolution contained in the trigger block. If less than one revolution is contained in the trigger block, nothing is displayed. A tachometer must be connect to the FFT or SOA plug-in in order to show traces in the shaft view/
+The shaft view shows the first entire revolution contained in the trigger block. If less than one revolution is contained in the trigger block, nothing is displayed. A tachometer must be connect to the FFT or SOA plug-in in order to show traces in the shaft view.
 The rotation indicator (and the angle labels arrangement 0 to 360°) is defined by the user<nowiki>’</nowiki>s preferences or directly from the window<nowiki>’</nowiki>s properties.
@@ Line 1,217: / Line 565: @@
 All graphs in a window have the same rotation and keyphasor location.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as Triggered Shaft View graphs on condition that a tachometer is associated to the plug-in:
@@ Line 1,224: / Line 572: @@
 * SOA x: Triggered Shaft View
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_110.png|framed|none]]
+[[Image:Display_Graphs_Traces_110.png|700px|none]]
 The following results may be displayed as Average Shaft View graphs on condition that a tachometer is associated to the plug-in and that time average is chosen:
@@ Line 1,231: / Line 579: @@
 * SOA x: Average Shaft View
-=====Properties=====
+'''Properties'''<br>
+[[Image:Display_Graphs_Traces_111.png|framed|none]]
+* '''X Axis:'''
+:-'''Linear:''' uses linear scale for X-axis units.
+* '''Y Axis:'''
+:-'''Linear:''' uses linear scale for Y-axis units.
+* '''Display mode:'''
+:-'''Multi-graph:''' overlays all traces on a single graph.
+:-'''Multi-trace:''' displays all traces using one graph per trace in the same window.
+* '''Trace color:'''
+:-'''Number:''' selects the trace number for color modification.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
+::the 0 value if the Y scale is linear.
+* '''Key phasor:''' Allows to specify the position of the key phasor by entering the shift angle in ° and the direction left or right.
+* '''Rotation indicator:'''
+:-'''Counter-Clockwise:''' defines a counter-clockwise rotation.
+:-'''Clockwise:''' defines a clockwise rotation.
+=====Waterfall graphs (2D view, 3D view, color spectrum)=====
+=====Slices sorting selection in 2D/3D=====
+NVGate is able to display unwrapped run-up/down profiles The "Sort points" selection allows displaying the data along one X scale but sort it along another reference.
+The following example shows data displayed with tachometer speed on the X axis speed but sorted along to the time:
+[[Image:V10_release_29.png|framed|none]]
+This is useful for mixed run up/down to see hysteresis.
+=====Second X axis in profiles=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_111.png|framed|none]]
+[[Image:V10_release_30.png|framed|none]]
-* X Axis
-* Linear: uses linear scale for X-axis units.
-* Y Axis
-* Linear: uses linear scale for Y-axis units.
-* Display mode
-* Multi-graph: overlays all traces on a single graph.
-* Multi-trace: displays all traces using one graph per trace in the same window.
-* Trace color
-* Number: selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
-* the bottom of the area if Y scale is dB or Logarithmic.
-* the 0 value if the Y scale is linear.
-* Key phasor
-* Allows to specify the position of the key phasor by entering the shift angle in ° and the direction left or right
-* Rotation indicator
-* Counter-Clockwise: defines a counter-clockwise rotation
-* Clockwise: defines a clockwise rotation
-====Waterfall graphs (2D view, 3D view, color spectrum)====
+For applications with mixed run-Up/Down (RPM, Torque, Temperature, etc...), it is useful to see the results evolution according to their occurrence (time, slice) but keeping the up/down information. This feature allows viewing the data unwrapped.
+----
 Waterfall display features different type of view of the stacked results. All views are related to the same 3D space:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_112.gif|framed|none]]
+[[Image:Display_Graphs_Traces_112.gif|framed|none]]
 The Z-axis is the selected reference (RPM, time or number of slices in order of the acquisition) its range is the waterfall depth. You can change the reference for z-axis at any time. This is available for 2D and 3D view.
-The Y-axis is the selected magnitude; this can be changed at any time
+The Y-axis is the selected magnitude; this can be changed at any time.
 The X-axis is the frequency.
-=====Tachometer centered on FFT/SOA blocks=====
+======Tachometer centered on FFT/SOA blocks======
 This allows centering tachometer speed at the center of the FFT/SOA trigger block(s). It is useful with long trigger blocks (High resolution analyses) to perfectly match the actual data with the order cursor or section.
 <font color="#808080">With classical tach:</font>
-The RPM is collected at the end of the analysis block
+The RPM is collected at the end of the analysis block.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_113.png|framed|none]]
+[[Image:Display_Graphs_Traces_113.png|framed|none]]
 This situation leads to an offset in the waterfall calculation of the orders (cursors, sections). For a run up, as the angular speed is over evaluated, the order calculation is lower than the actual ones.
@@ Line 1,281: / Line 646: @@
 </font>The RPM is calculated as the average speed during the block duration to be synchronized with the analyzed data.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_114.png|framed|none]]
+[[Image:Display_Graphs_Traces_114.png|framed|none]]
 <br>
@@ Line 1,291: / Line 656: @@
 The centered speed is calculated as:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_115.png|framed|none]]
+[[Image:Display_Graphs_Traces_115.png|framed|none]]
 The RPM centering and averaging is done in the analysis plug-in prior to be connected to the waterfall. To use the centered tach simply add the said tachometer to the corresponding plug-in (FFTn or SOAn). These additional tachometers are available in the waterfall as soon as one of the result of the plug-in is added to the waterfall.
@@ Line 1,303: / Line 668: @@
 . Select the Plug-in Tach, as a tachometer and reference
+[[Image:Display_Graphs_Traces_116.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_11.png]]
+ display modes :
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_116.png|framed|none]]
-=====D display modes=====
 . 3D isometric
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_07.png|framed|none]]
+[[Image:Display_Graphs_Traces_07.png|framed|none]]
 . 3D perspective:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_117.gif|framed|none]]
+[[Image:Display_Graphs_Traces_117.gif|framed|none]]
 . Freq/Time Colormap:
 . Time/Freq Colormap:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_08.png|framed|none]]
+[[Image:Display_Graphs_Traces_08.png|framed|none]]
-----
-=====Sections=====
-Waterfall display provides extraction of section from the 3D space
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_118.png|framed|none]]
-These sections are linked with cursors of the 3D view:
-* Fig1: for a fixed value of the X-axis of the 3D view,
-* Fig2: For a fixed value of the reference
-* Fig3: for a fixed value of the order (follow the evolution of an order) or frequency for order spectra waterfall.
-During the acquisition, an autoscale is available on the z-axis (reference) if <nowiki>’</nowiki>z Adjust<nowiki>’</nowiki> is active.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_119.png|framed|none]]
-The <nowiki>’</nowiki>Select Tacho<nowiki>’</nowiki> mode allows tracking an order in function of the selected tachometer. The extraction order could be done in function of the selected tacho.
-Graphs are available for the windows allowing tracking different results:
-. 3D view: you can select by right-clicking on it an isometric view, a perspective view, a freq/time colormap or a time/freq colormap (useful to track orders). The 3D view is the default view.
-. 2D views: - XY section,
-* YZ section,
-* Order extraction (only available if a tachometer is active).
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_120.png|framed|none]]
-The sections are displayed in these 2D views. The sections can be managed in the section manager window (see waterfall window in chapter2 <nowiki>’</nowiki>Display<nowiki>’</nowiki>).
-In the section manager, add section made a copy of each cursor (Frequency, Reference, Order) in all displayed windows. These memorized traces could be added to result by the <nowiki>’</nowiki>add to result selection.
-The waterfall sections can be saved as independent results (spectra, reference profiles, extracted profiles).
-The selection is achieved using the "Add to result selection" entry from the waterfall window contextual menu.
-----
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_121.png|framed|none]]
-After being saved, the sections became independent results, reducing the amount of saved data when you are focusing only on extracted data.
 ----
-====Orbit====
+=====Orbit=====
 Displays the AC dynamic motion of the center of a rotating shaft. It generates a two-dimensional image.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as Orbit graphs on condition that a tachometer is associated to the plug-ins:
-* FFT x: Raw Orbit, Synthetized Orbit
+* FFT x: Raw Orbit, Synthetized Orbit  ( for customer with FFT-diag option)
-* SOA x: Raw Orbit, Synthetized Orbit
+* SOA x: Raw Orbit, Synthetized Orbit  (For customer with ORD-Diag option)
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_122.png|framed|none]]
+Note :
+[[Image:Display_Graphs_Traces_122.png|framed|none]]
 The Raw Orbit graph displays an entire number of complete rotations contained in one block. At least one rotation is required.
@@ Line 1,387: / Line 704: @@
 The FFT should better be triggered by the Ext. Sync. channel.
-If the FFT is bad configured, it is possible that no results are shown.
+If the FFT is bad configured, it is possible that no results are shown.<br>
+The FFT synthtetized Orbit is only available for customer with FFt-CBT option.
+The FFT synthetized Orbit is filtered using CBT technics. this method provide a non accurate phase value on synthetiseed orbit. For acurate  synthetize Orbit phase, you need to use the SOA Synthetized Orbit.
-The Synthetized Orbit graph is calculated with the orders of two channels selected. For a couple "ChannelA, ChannelB" up to 8 Synthetized Orbits can be selected. Each orbit corresponds to an order which appears in the tracked order setting.
-The display of the Synthetized Orbit is done on 360 points (1 point per degree).
+The ORD Synthesized Orbit graph is calculated with the orders of two channels selected. For a couple "ChannelA, ChannelB" up to 8 Synthesized Orbits can be selected. Each orbit corresponds to an order which appears in the tracked order setting.
-=====Properties=====
+The display of the Synthesized Orbit is done on 360 points (1 point per degree).
+'''Properties'''<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_123.png|framed|none]]
+[[Image:Display_Graphs_Traces_123.png|framed|none]]
-* X Axis
+* '''X Axis:'''
-* Linear: uses linear scale for X-axis units.
+:-'''Linear:''' uses linear scale for X-axis units.
-* Y Axis
+* '''Y Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Display mode
+* '''Display mode:'''
-* Multi-graph: overlays all traces on a single graph.
+:-'''Multi-graph:''' overlays all traces on a single graph.
-* Multi-trace: displays all traces using one graph per trace in the same window.
+:-'''Multi-trace:''' displays all traces using one graph per trace in the same window.
-* Trace color
+* '''Trace color:'''
-* Number: selects the trace number for color modification.
+:-'''Number:''' selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
-* the bottom of the area if Y scale is dB or Logarithmic.
+::the bottom of the area if Y scale is dB or Logarithmic,
-* the 0 value if the Y scale is linear.
+::the 0 value if the Y scale is linear.
-* Rotation indicator
+* '''Rotation indicator:'''
-* Counter-Clockwise: defines a counter-clockwise rotation
+:-'''Counter-Clockwise:''' defines a counter-clockwise rotation
-* Clockwise: defines a clockwise rotation
+:-'''Clockwise:''' defines a clockwise rotation.
-* Autoscale
+* '''Autoscale:'''
-* Continuous: applies a continuous autoscale during the measurement
+:-'''Continuous:''' applies a continuous autoscale during the measurement.
-* Disabled: disable the autoscale
+:-'''Disabled:''' disable the autoscale.
-* Orientation
+* '''Orientation:''' Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal.
-* Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal.
+* '''Number of revolutions:''' Number of revolution displayed in the graph.
-* Number of revolutions
-* Number of revolution displayed in the graph
-====Gap====
+=====Gap=====
 Displays the shaft center DC position changes.
-=====Source Signals=====
+'''Source Signals'''<br>
 The following results may be displayed as Gap graphs:
@@ Line 1,432: / Line 750: @@
 The Gap is available in the Waterfall for the Monitor and Time domain analyzer plug-ins and only for the DC values.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_124.png|framed|none]]
+[[Image:Display_Graphs_Traces_124.png|framed|none]]
-=====Properties=====
+'''Properties'''<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_125.png|framed|none]]
+[[Image:Display_Graphs_Traces_125.png|framed|none]]
-* X Axis
+* '''X Axis:'''
-* Linear: uses linear scale for X-axis units.
+:-'''Linear:''' uses linear scale for X-axis units.
-* Y Axis
+* '''Y Axis:'''
-* Linear: uses linear scale for Y-axis units.
+:-'''Linear:''' uses linear scale for Y-axis units.
-* Display mode
+* '''Display mode:'''
-* Multi-graph: overlays all traces on a single graph.
+:-'''Multi-graph:''' overlays all traces on a single graph.
-* Multi-trace: displays all traces using one graph per trace in the same window.
+:-'''Multi-trace:''' displays all traces using one graph per trace in the same window.
-* Trace color
+* '''Trace color:'''
-* Number: selects the trace number for color modification.
+:-'''Number:''' selects the trace number for color modification.
-* Color box: click on this box to modify the color of the selected trace.
+:-'''Color box:''' click on this box to modify the color of the selected trace.
-* Filling mode: if selected, all the curves of the windows are filled from:
+:-'''Filling mode:''' if selected, all the curves of the windows are filled from:
-* the bottom of the area if Y scale is dB or Logarithmic.
+::the bottom of the area if Y scale is dB or Logarithmic,
-* the 0 value if the Y scale is linear.
+::the 0 value if the Y scale is linear.
-* Rotation indicator
+* '''Rotation indicator:'''
-* Counter-Clockwise: defines a counter-clockwise rotation
+:-'''Counter-Clockwise:''' defines a counter-clockwise rotation.
-* Clockwise: defines a clockwise rotation
+:-'''Clockwise:''' defines a clockwise rotation.
-* Autoscale
+* '''Autoscale:'''
-* Continuous: applies a continuous autoscale during the measurement
+:-'''Continuous:''' applies a continuous autoscale during the measurement.
-* Disabled: disable the autoscale
+:-'''Disabled:''' disable the autoscale.
-* Orientation
+* '''Orientation:''' Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal.
-* Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal.
+* '''Tags:'''
-* Tags
+:-'''Visible:''' Tags are visible on the graph.
-* Visible: Tags are visible on the graph
+:-'''Number:''' defines the tags density on the plot (min or max).
-* Number: defines the tags density on the plot (min or max).
-===Scale===
-This topic deals with all the X and Y graph axis properties. It is possible to change the min and max axis values for example.
-====Axis properties====
-This dialog box is used to set the axis values and behavior.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_126.png|framed|none]]
+====Contextual menu====
-=====Min=====
+The Graph contextual menu is accessible by right clicking on the graph.
-Enabled only when the "User Define" type is selected. It sets the minimum value assigned to the scale.
-=====Max=====
+=====Axis properties=====
-Enabled only when the "User define" type is selected. It sets the maximum value assigned to the scale.
+The axis values and behavior can be set in the ''Axis properties'' dialog box.
-=====Type=====
+[[Image:Display_Graphs_Traces_126.png|framed|none]]
-* User Define: Used to select the min and max scale values.
+* '''Min: '''Enabled only when the ''User Define'' type is selected. It sets the minimum value assigned to the scale.<br>
-* Autoscale on active trace: The minimum and maximum scale values are automatically adjusted to the values of the active trace.
+* '''Max: '''Enabled only when the ''User define'' type is selected. It sets the maximum value assigned to the scale.<br>
-* Autoscale on all traces: The minimum and maximum scale values are automatically adjusted so that every trace is fully visible.
+* '''Boundaries:'''
+:- '''User Define''': Used to select the min and max scale values.
+:- '''Autoscale on active trace''': The minimum and maximum scale values are automatically adjusted to the values of the active trace.
+:- '''Autoscale on all traces''': The minimum and maximum scale values are automatically adjusted so that every trace is fully visible.
+* '''Type''': Changes the type of scale (Linear, logarithmic or dB). Only the available types are enabled.
+* '''Enable/disable zoom''': when checked, it is impossible to make any change to the scale.
-=====Scale type=====
+=====Zoom=====
-Changes the type of scale (Linear, logarithmic or dB). Only the available types are enabled.
+'''X zoom'''<br>
+All of these functions are available if there is no active X automatic autoscale.
-=====Enable/disable zoom=====
+* '''Zoom in: '''Zoom in on the horizontal scale by placing the cursor position in the center. If the center is at the minimum value, you may not zoom. You may zoom if the X scale width is greater than the active signal precision in X.
-When checked, it is impossible to make any change to the scale.
+* '''Zoom out:''' Zoom out from the horizontal scale by placing the cursor position in the center. If the center is at the minimum value, you may not zoom. You may zoom if Z min and max values are included in the min and max value gap defined by the active signal of the window.
+* '''Full width:''' Restores the X min and max values defined by the active signal of the window.
+* '''Auto-scale:''' Set min and max values of the X scale to the X min and max values of the active signal for the "On active" item and to the X min and max values of all signals of the window for "On all" item. A margin is added to these values to facilitate visibility. The X width is always more than X active signal precision.
-===Cursors===
+'''Y zoom'''<br>
-====Style====
+* '''Zoom in:''' Used to zoom in on the vertical scale. You may zoom in if the scale width is greater than the active signal precision in Y.
-=====Vertical line=====
+* '''Zoom out:''' Used to zoom out from the vertical scale. You may zoom in if min and max values are included in Y min and max value gap defined by the active signal of the window.
-Displays a single line.
+* '''Full width:''' Restores the Y min and max values defined by the active signal of the window.
+* '''Auto-scale:''' Sets min and max values of the Y scale to the Y min and max values of the active signal for the "On active" item and to the min and max values of all signals of the window for "On all" item. A margin is added to these values to facilitate visibility. The Y width is always more than Y active signal precision.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_127.png|framed|none]]
+'''Z zoom'''<br>
+All of these functions are available if there is no active X automatic autoscale.
-=====Vertical dashed line=====
+* '''Zoom in:''' Used to zoom in on the Z scale. You may zoom if the scale width is greater than the active signal precision in Z.
-Displays a single dashed line.
+* '''Zoom out:''' Used to zoom out from the Z scale. You may zoom if min and max values are included in Z min and max value gap defined by the active signal of the window.
+* '''Full width:''' Restores the Z min and max values defined by the active signal of the window.
+* '''Auto-scale''': Sets min and max values of the Z scale to the Z min and max values of the active signal. A margin is added to these values to facilitate visibility. The Y width is always greater than Y active signal precision.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_128.png|framed|none]]
+=====Scale=====
+'''X scale:''' Changes X scale type of the area to the selected type. Available types (according to the kind of the area) are:
+* Linear
+* Logarithmic
-----
+'''Y scale:''' Changes Y scale type of the area to the selected type. Available types (according to the kinds of the area and the window) are:
+* Linear
+* Logarithmic
+* DB
-=====Vertical with rectangle=====
+'''Z scale:''' Changes Z scale type of the area to the selected type. Available types (according to the kinds of the area and the window) are:
-A rectangle is displayed around the selected point.
+* Linear
+* Logarithmic
+* dB
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_129.png|framed|none]]
+=====Marker manager=====
+This dialog is only available for the Monitoring and Compressed windows. It contains the list of all record markers of the record signal opened. In the monitoring window, each record marker comment can be modified. In the compressed window, comments cannot be modified.
-=====Cross hair=====
+[[Image:Display_Graphs_Traces_26.png|400px|left]]   [[Image:Display_Graphs_Traces_27.png|300px|none]] <br><br><br><br>
-No line is displayed but there is a target around the selected point.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_130.png|framed|none]]
+=====Reset Min & Max=====
+Restores min and max values for the selected scale
-=====Vertical <nowiki>+</nowiki> horizontal=====
+[[Image:Display_Graphs_Traces_28.png|framed|none]]
-Displays 2 lines, an horizontal and a vertical that cross the selected point.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_131.png|framed|none]]
+===Window===
-====Dual====
+====Contextual menu====
-Select 2 cursors from the window properties. That allows to compute delta values on X-axis and Y-axis.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_132.png|framed|none]]
+The window contextual menu is accessible by right clicking on the part around the graph.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_133.png|framed|none]]
+=====Display=====
+In each window, several display modes are available, depending on the graph type.
-----
+{|class="wikitable" style="background:white" |border="2" cellspacing="0" cellpadding="4" width="40%" align="center"
+|'''Graph type '''
+|'''Display mode'''
-====Cursor Link====
+|-
-Link the cursors of different graphs that share the same unit on the X-Axis. Once linked, all the cursors move at the same time and the same position.
+|Time signal
+|Multi-trace<br>Multi-graph<br>Time multi-trace 3D
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_134.png|framed|none]]
+|-
+|Spectral
+|Magnitude<br>Phase Real part<br>Imaginary part<br>Magnitude/Phase<br>Real/Imaginary<br>Polar Real part 3D<br>Imaginary part 3D<br>Magnitude 3D<br>Phase 3D<br>Real part multi-graph <br>Imaginary part multi-graph<br>Magnitude multi-graph<br>Phase multi-graph <br>Merged magnitude/phase
-====Link all cursors in one click====
+|-
+|Nth Octave
+|Multi-trace<br>Multi-graph
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_12.png|framed|none]]
+|-
+|Viewmeter/Monitoring
+|Continuous<br>Viewmeter<br>Brick<br>Digital<br>Digital magnitude & phase
-Cursors can be linked one by one to follow the same X-coordinate. It is now possible to link/un link from the cursor contextual menu.
+|-
+|Waterfall
+|Magnitude<br>Phase<br>Real part<br>Imaginary part
-This apply to the link ad link by reference and concern all the cursors of the current layout.
+|-
+|Monitoring/Compressed signal
+|Multi-graph (Only one mode available)
-----
+|-
+|Profile
+|Multi-trace<br>Multi-graph
-====Waterfall link====
+|-
+|Complex profile
+|Magnitude<br>Phase Real part<br>Imaginary part<br>Magnitude/Phase<br>Real/Imaginary<br>Real part multi-graph<br>Imaginary part multi-graph<br>Magnitude multi-graph<br>Phase multi-graph <br>Merged magnitude/phase
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_135.gif|framed|none]]
+|-
+|Lissajoux
+|Multi-trace (Only one mode available)
-=====Link=====
+|-
-Link the cursor of different graph that share the same unit on the X-Axis. Once linked, all the cursor moved at the same time and the same position
+|Constant Band Tracking
+|Magnitude<br>Phase<br>Real part<br>Imaginary part<br>Magnitude/Phase<br>Real/Imaginary<br>Real part multi-graph<br>Imaginary part multi-graph<br>Magnitude multi-graph<br>Phase multi-graph <br>Merged magnitude/phase
-=====Link by reference=====
+|}<br clear="all">
-Link the cursor of several Waterfall referring to their internal index. Enables to link cursors that are displayed in graphs that do not share the same unit
-====Free====
+{|border="0" cellspacing="0" cellpadding="4" width="100%" align="center"
-Release a cursor that has been previously linked
+|-
+|'''Multi-trace: '''
+[[Image:Display_Graphs_Traces_29.png|300px|none]]
+|This mode displays all window traces of the same type in one graph. In several window types, two multi-trace graphs are displayed in the same window: for example, one for the Real part and one for the imaginary part. In this mode, a''' magnitude gathering mode''' can be activated in the set preferences window: this mode displays signals by creating one area for each Y magnitude included in the window. If two or more signals have the same Y magnitude, they will be displayed in the same area.
+<br><br>
+|-
+|'''Multi-graph: '''<br>
+[[Image:Display_Graphs_Traces_30.png|300px|none]]
+|This mode displays one graph per trace in the window.
+<br><br>
+|-
+|'''Multi-trace 3D: '''<br>
+[[Image:Display_Graphs_Traces_31.png|300px|none]]
+|This mode displays all traces in the same 3D graph.
+<br><br>
+|-
+|'''Real part: '''<br>
+[[Image:Display_Graphs_Traces_32.png|300px|none]]
+|This mode displays the real part of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
+<br>
+|-
+|'''Imaginary part: '''<br>
+[[Image:Display_Graphs_Traces_33.png|300px|none]]
+|This mode displays the imaginary part of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
+<br><br>
+|-
+|'''Magnitude: '''<br>
+[[Image:Display_Graphs_Traces_34.png|300px|none]]
+|This mode displays the magnitude of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
+<br><br>
+|-
+|'''Phase: '''<br>
+[[Image:Display_Graphs_Traces_35.png|300px|none]]
+|This mode displays the phase of the signal. It can be displayed in multi-trace, multi graph, or multi-trace 3D, depending on the graph type.
+<br><br>
+|-
+|'''Merged magnitude/phase: '''<br>
+[[Image:Display_Graphs_Traces_36.png|300px|none]]
+|This mode displays the magnitude and the phase of the signal in the same area. This is a multi-trace mode. The module scale is on the left of the graph and the phase scale is on the right.
-===Markers===
-The markers allow quantifying measurement behaviors such as the band power between 2 frequencies, track signal harmonics or tracking the max amplitude of a signal…
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_136.png|framed|none]]
+|}<br clear="all">
-There is also a copy function using the right click from the Infotrace that allows to paste the whole marker table to Word<sup>®</sup> or Excel<sup>®</sup>.
+=====Properties=====
+See "Graph type" topic p 37.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_137.png|framed|none]]
+* Always on top: the window will be on top
+* Default: reset the all the settings to the default settings
+* Apply to: applies the settings either to All windows or just for the Active window
+* Save as user preferences: save the properties settings
-====Free====
+=====Active trace=====
-When available, a free marker can be placed and moved within a graph to track specific values. A label can be associated with each free marker.
+Select the active trace of the window. When the signal changes, the Y scale is updated to the Y magnitude of the signal. Only signals with the same Y magnitude as the active signal are displayed. The others are displayed as unavailable in the info-trace.
-Right clicking on a free maker displays menu including "Properties", which opens edit free maker dialog box.
+The color of the cursor corresponds with the trace<nowiki>’</nowiki>s color; you can select in the infotrace the active trace and its linked cursor using arrays of the keyboard.
+=====Remove trace=====
+Removes selected trace from the window. If this trace is the active one, the active signal is changed. A trace can be removed using <nowiki>’</nowiki>Ctrl suppr<nowiki>’</nowiki>.
+=====Memorize trace=====
+[[Image:Save group.png|framed|none]]
+Memorizes the active trace of the active window at any time (independently from Run and Stop event).
-=====Free marker properties=====
+The memorized trace is named ''Memx: active trace name.  ''There<nowiki>’</nowiki>s an incrementation of the memorized traces id (x). You can save the memorized traces by adding it to the result selection.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_03.png|framed|none]]
+<font color="#FF0000">
+[[Image:Display_Graphs_Traces_37.png|framed|none]]
-* Label: The label associated with the marker. The user can enter directly a name or pick <nowiki>’</nowiki>display current position<nowiki>’</nowiki> to display automatically the coordinates of the selected point.
+</font>'''Note''': you can memorize an active trace by using the insert button of the keyboard.
-* Position: The X position of the current marker. The position value can be fixed by entering the new value in this box.
-----
+=====Clear memory=====
+Clear all memorized traces. You can remove specific memorized traces with the <nowiki>’</nowiki>Remove trace<nowiki>’</nowiki> command.
-* Interpolation: This setting selects the interpolation of values displayed in the marker table.
+=====AutoMemorize=====
-* None: no interpolation applied.
-* X: x interpolation is active.
-* X & Y: x and y interpolations are active.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_138.png|framed|none]]
+[[Image:Display_Graphs_Traces_38.png|framed|none]]
-When the interpolation function is active, the interpolated value is preceded by a "i".
+<nowiki>’</nowiki>AutoMemorize<nowiki>’</nowiki> traces consists in memorizing traces on the stop event. Select the graph to be memorized.
-Note: the interpolated values of free markers will be available only if the free marker is placed on a peak. The peak detection criteria are the same as the peak marker adjusted in the User preferences.
+By using an operator on an active trace and his associated memorized traces is available by right-clicking on the graphs and selecting <nowiki>’</nowiki>operators<nowiki>’</nowiki>. This operator will be automatically updated if a memorized trace is added or deleted (see also operators).
-* Apply to
+During a multi-run, the average on automatic memorized trace is done automatically for each run, and the average trace is automatically updated.
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated to: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-----
+=====Auto scale Y on all=====
+Sets min and max values of the Y scale to the Y min and max values of all signals displayed in the graph. A margin is added to these values to facilitate visibility. The Y width is always more than Y active signal precision.
-====Harmonic====
+=====Cascade view=====
-Computes and displays harmonic values for the selected trace(s).
+Present the current active trace in a cascade view of the last 50 (default value) recovered results.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_139.png|framed|none]]
+This is dedicated for monitoring used, this is not a waterfall (acquisition mode in real-time). The Z-axis represents the number of slices independently from any reference such as time or RPM evolution.
-=====Harmonic marker properties=====
+This function is available only for 2D spectra and trigger blocks.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_140.png|framed|none]]
+'''Warning''': if you are in manual trigger, or if there is an absence in the time, you won<nowiki>’</nowiki>t be able to notice it with the cascade view. In the following example, a pause has been made during the measurement; on the waterfall 3Dview (with time for reference) it is possible to see this pause. In the cascade view the pause won<nowiki>’</nowiki>t be noticed (number of block for reference).
-* Harmonic visibility: Harmonics checklist. Only checked harmonics will be displayed.
+[[Image:Display_Graphs_Traces_39.png|framed|none]]
-* Interpolation
+=====Weighting=====
-* None: no interpolation applied.
+These commands are available only for results with an X-Axis that represents frequencies. The operations are performed in the spectral domain
-* X: x interpolation is active.
-* X&Y: x and y interpolations are active.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_141.png|framed|none]]
+* '''None: '''No weighting is applied.
+* '''A Weighting: '''Selects the "A" weighting
+* '''More: '''Used to select specialized weighting
+<br>See more details about Weightings in [[NVGate_filter_formula_appendix|NVGate Filters]].
-When the interpolation function is active, the interpolated value is preceded by a "i".
+=====Add to Result selection=====
+This command adds all the results displayed in the window to the list of results that must be saved in a measurement. If the result is already on the list, it is not added. Some results displayed cannot be saved (Instant trigger of the front end, profile of a DC input).
-Note: the interpolated values of harmonic markers will be available only if the harmonic marker is placed on a peak.
+=====Copy graph(s)=====
+This command copies the active graph in the format <nowiki>’</nowiki>wmf<nowiki>’</nowiki>, this command is not available for 3D Waterfall.
-* Apply to
+=====Copy bitmap=====
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
+This command copies graph in the format <nowiki>’</nowiki>.bmp<nowiki>’</nowiki>
-* Associated to: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-----
+=====Copy data=====
+This command copies data in order to export them in Excel. This will export all point<nowiki>’</nowiki>s values from the active graph. NVGate export values with a point as separator and in engineer mode. This command is available for all spectra and profiles (even waterfall profiles).
-====Peak====
+If the graph is displayed with complex values, then the <nowiki>’</nowiki>copy data<nowiki>’</nowiki> command allows to export phase and module values.
-Computes and displays peak values for the selected trace(s).
-A spectrum line is detected as a peak if two following conditions are matched:
+Example:
-* The 2 adjacent spectrum line levels (N-1, N<nowiki>+</nowiki>1) are lower than the central spectrum line one<nowiki>’</nowiki>s
+* Natural values:
-* The 2 following adjacent spectrum line levels (N-2, N<nowiki>+</nowiki>2) are lower than the central spectrum level minus the peak threshold
+Values displayed are values from the Active trace:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_142.png|framed|none]]
+[[Image:Display_Graphs_Traces_63.png|framed|none]]
-=====Peak marker properties=====
+* Complex values:
+For complex values the <nowiki>’</nowiki>Copy data<nowiki>’</nowiki> will displayed phase and module values.
+[[Image:Display_Graphs_Traces_64.png|framed|none]]
-----
+=====Copy to Mask=====
+Adds the result to the project template results. This result is then available for editing and use as a template.
-* Threshold: In the example below, the "Threshold" is 10 dB.
+=====Add Alarm=====
+Dialog box to create an alarm. An alarm compares a dynamic signal with a template result. The result of the comparison can be used in the macro to perform certain tests.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_143.png|framed|none]]
+To make this option available, a result template must be added to the window (using drag & drop for example).
-* Ignore under: Does not display the detected peak if the peak is under this value. In the example below, the "ignore under" value is –15 dB.
+[[Image:Display_Graphs_Traces_65.png|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_144.png|framed|none]]
+Go to the "Chapter 5: Tools" to see more details about the Result template.
-* Number of peak: Number of peaks to be displayed. That will first display the greatest peaks.
+[[Image:Display_Graphs_Traces_66.png|framed|none]]
-* Interpolation
-* None: no interpolation applied.
-* X: x interpolation is active.
-* X & Y: x and y interpolations are active.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_145.png|framed|none]]
+[[Image:Display_Graphs_Traces_67.png|framed|none]]
-When the interpolation function is active, the interpolated value is preceded by an "i".
+To create an alarm, select a result from the top list, a template from the bottom list and click the Add button. The list on the right displays a list of the existing alarms.
-* Apply to
+===Pointer type===
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated with: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-* Damping ratio damping ratio is calculated for each detected peak. The calculation is based on the Half-power-band-width method, where DR is the damping ratio:
-:
+The pointer type depends on the mode that is activated in the [[NVGate_Ribbons:_Display/Graph_Tab|Display Tab]].
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_146.png|framed|none]]
-The calculation of the damping factor is activated through the marker properties or preferences.
+{|border="0" cellspacing="0" cellpadding="4" width="100%" align="center"
+|-
+|[[Image:Display_Graphs_Traces_17.png|25px|none]]
+|'''Zoom:''' Displayed when the magnifying tool is selected:  Used to select a rectangle in a graphic area, or to zoom in with a by left click and drag.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_10.png]]
+|-
+|[[Image:Display_Graphs_Traces_18.png|25px|none]]
+|'''Cursor:''' Displayed when cursor mode is selected: Used to move the cursor by left clicking and dragging.
-When it is activated an additional column is added in the corresponding marker table. The marker table can be saved in an MS Office document or simply copied and pasted.
+|-
+|[[Image:Display_Graphs_Traces_19.png|25px|none]]
+|'''Move:''' Displayed when <nowiki>’</nowiki>move mode<nowiki>’</nowiki> is selected. Used to change x and y scale boundaries by left clicking and dragging.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_147.png|framed|none]]
+|-
+|[[Image:Display_Graphs_Traces_20.png|25px|none]]
+|'''Rotation:''' Displayed when the rotation tool is selected: Used to rotate a 3D graph.
-Warning, using nonhomogeneous weighting windows (i.e.: equivalent noise bandwidths are not the same) on FRF channels leads to incorrect peak interpolation and damping results.
+|-
+|[[Image:Display_Graphs_Traces_21.png|25px|none]]
+|'''Marker:''' Displayed when the marker mode is activated. Used to modify the marker position and properties.
-====Max====
+|-
-Computes and displays max values for the selected trace(s).
+|
+|'''Scale scrolling''': Displayed when scale mode is selected and when the cursor is on a scale area.<br>
+[[Image:Display_Graphs_Traces_16.png|500px|none]]
-A maximum is defined as a local maximum such that the variation in size of spectral density of ray, in relation to other local maximum surrounding it, is greater than a set threshold
+|}<br clear="all">
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_148.png|framed|none]]
+===Cursors===
-=====Max marker properties=====
+====Style====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_149.png|framed|none]]
+{|border="0" cellspacing="0" cellpadding="4" width="70%" align="left"
+|'''Vertical line:''' <br>
+[[Image:Display_Graphs_Traces_127.png|300px|none]]
+|Displays a single line.<br>
-* Hystersis
+|-
+|'''Vertical dashed line:''' <br>
+[[Image:Display_Graphs_Traces_128.png|300px|none]]
+|Displays a single dashed line.<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_150.png|framed|none]]
+|-
+|'''Vertical with rectangle:'''<br>
+[[Image:Display_Graphs_Traces_129.png|300px|none]]
+|A rectangle is displayed around the selected point.<br>
-* Ignore under: Does not display the detected peak if the peak is under this value. In the example below, the "ignore under" value is –15 dB.
+|-
+|'''Cross hair:''' <br>
+[[Image:Display_Graphs_Traces_130.png|300px|none]]
+|No line is displayed but there is a target around the selected point.<br>
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_151.png|framed|none]]
+|-
+|'''Vertical <nowiki>+</nowiki> horizontal:''' <br>
+[[Image:Display_Graphs_Traces_131.png|300px|none]]
+|Displays 2 lines, an horizontal and a vertical that cross the selected point.
+|}<br clear="all">
-* Number of max: Number of max to be displayed. That will first display the greatest max.
+====Dual====
-* Interpolation
+Select 2 cursors from the window properties. That allows to compute delta values on X-axis and Y-axis.
-* None: no interpolation applied.
-* X: x interpolation is active.
-* X & Y: x and y interpolations are active.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_152.png|framed|none]]
+[[Image:Display_Graphs_Traces_132.png|400px|left]]   [[Image:Display_Graphs_Traces_133.png|400px|none]] <br><br><br><br><br><br>
-When the interpolation function is active, the interpolated value is preceded by a "i".
+====Cursor Link====
+Link the cursors of different graphs that share the same unit on the X-Axis. Once linked, all the cursors move at the same time and the same position.
-* Apply to
+[[Image:Display_Graphs_Traces_134.png|framed|none]]
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated to: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-* Damping ratio damping ratio is calculated for each detected Maximum. The calculation is based on the Half-power-band-width method, where DR is the damping ratio:
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_153.png|framed|none]]
+====Link all cursors in one click====
-The calculation of the damping factor is activated through the marker properties or preferences.
+[[Image:Display_Graphs_Traces_12.png|framed|none]]
-When it is activated an additional column is added in the corresponding marker table. The marker table can be saved in an MS Office document or simply copied and pasted.
+Cursors can be linked one by one to follow the same X-coordinate. It is now possible to link/unlink from the cursor contextual menu.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_154.png|framed|none]]
+This applies to the link by reference and covers all the cursors of the current layout.
-Warning, using nonhomogeneous weighting windows (i.e.: equivalent noise bandwidths are not the same) on FRF channels leads to incorrect peak interpolation and damping results.
+----
-====Side band====
+====Waterfall link====
-Displays values for a central frequency and side frequencies (left and right) defined by a delta value.
-The management of side band markers selects the assumed porter and the first side band of modulation. The position of the cursor during the selection of the porter or the first side band is previously interpolated on the frequency axis, taking into account the frequency response of the weighting window used if the Interpolation setting allows this
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_155.png|framed|none]]
-=====Side band marker properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_156.png|framed|none]]
-* Start: Central value.
-* Delta: Range between 2 side frequencies.
-* Number of bands: Defines the number of bands (on the left and on the right).
-* Interpolation
-* None: no interpolation applied.
-* X: x interpolation is active.
-* X & Y: x and y interpolations are active.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_157.png|framed|none]]
-When the interpolation function is active, the interpolated value is preceded by a "i".
-Note: the interpolated values of free markers will be available only if the side band marker is placed on a peak.
-* Apply to
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated with: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-====Power band====
-Computes and displays power in signal range defined by start position and delta.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_158.png|framed|none]]
-=====Power band marker properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_159.png|framed|none]]
-* Start: Start value for the power band computation.
-* Delta: Bandwidth used for the computation.
-* Apply to
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated with: the marker is associated to only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-====Octave====
-Displays all band values
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_160.png|framed|none]]
-=====Octave marker properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_161.png|framed|none]]
-* Apply to
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated with: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-====Kinematic markers====
-The Kinematic marker helps identifying the frequencies (or orders) which match the various rotating speed in machineries. These frequencies are linked with a fundamental one (usually the main shaft rotating frequency) by fixed ratio. These ratios depend on the machinery kinematics.
-Kinematic marker fits ideally the diagnostics on bearing, gear train and belt/chain systems by helping the identification of the defects<nowiki>’</nowiki> source.
-To add a kinematic marker to a window, select Kinematic from the ''Display/graph/Markers'' left button.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_162.png|framed|none]]
-Then it is become possible to select one marker from the list. Click ''Select Kinematic Marker ''button to open the selection dialog. Select one line from the table of the current tab and close the dialog box. The corresponding marker will be applied double clinking on a spectral graph.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_163.png|framed|none]]
-This type of marker may be manipulated from any of the sub-marker lines.
-=====Kinematic marker properties=====
-In the kinematic marker properties (Right click on it or through marker manager) the fundamental frequency may be adjusted in Frequency unit or RPM.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_164.png|framed|none]]
-=====Kinematic marker Description=====
-The Kinematic descriptions for these markers are taken from ''.csv'' (or Excel™) files.
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_165.png|framed|none]]
-The files may be modified to adjust the kinematics ratio. The files content are read every time the select kinematic marker is opened. No need to exit the NVGate software for update.
-Each file can contain unlimited markers and group of markers. NVGate handle simultaneously multiple kinematic descriptor files. The descriptor files have to be in the following directory (default):''C:\OROS\NVGate data\Markers\Kinematic.''
-The kinematic marker operations are similar to the harmonics one.
-====Periodic====
-Computes and displays periodic values for the selected trace(s).The periodic allows identifying the periodicity and frequency of repeated phenomena identified into time series graphs
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_166.png|framed|none]]
-=====Periodic marker properties=====
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_167.png|framed|none]]
-* Period visibility: checklist. Only checked periods will be displayed.
-* Apply to
-* All: the marker is associated with all curves of the graph. All Y values will be computed and displayed in the free marker tab.
-* Associated to: the marker is associated with only one trace of the graph. If active is selected, the marker is applied to the current active trace of the graph.
-====Copy marker table====
-Available in Infotrace area. Used to copy marker data to the clipboard. The data is formatted to be pasted easily in Word<sup>®</sup> or Excel<sup>®</sup>.
-Example of result with this command:
-For Word<sup>®:</sup>
-Free marker
-Id Label Trace X Unit Y Unit
-Marker Sig <nowiki>[</nowiki>1<nowiki>]</nowiki> 0.00141 s 5.453 V
-For Excel<sup>®:</sup>
+[[Image:Display_Graphs_Traces_135.gif|framed|none]]
-[[Image:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces_168.png|framed|none]]
+* '''Link:''' Link the cursor of different graphs that share the same unit on the X-Axis. Once linked, all the cursor moved at the same time and the same position.
-====Marker table in reports====
+* '''Link by reference:''' Link the cursor of several Waterfalls referring to their internal index. Enables linking cursors that are displayed in graphs that do not share the same unit.
-The marker table can be droped in the report template. See Vol. 3 report Tools and ribbons for details.
-[[category:[M002-117-3]REF-MAN_VOL2_Display_Graphs_Traces]]
+* '''Free:''' Release a cursor that has been previously linked.

Difference between revisions of "NVGate Display"

Latest revision as of 09:50, 14 January 2022

Interface overview

Infotrace

Traces names

Contextual menu

Graph

Graph type

Time

Spectral

Lissajous

Nth octave

Viewmeter

Monitoring

Compressed signal

Profile

Complex profile

Coherence

Shaft View

Waterfall graphs (2D view, 3D view, color spectrum)

Slices sorting selection in 2D/3D

Second X axis in profiles

Tachometer centered on FFT/SOA blocks

Orbit

Gap

Contextual menu

Axis properties

Zoom

Scale

Marker manager

Reset Min & Max

Window

Contextual menu

Display

Properties

Active trace

Remove trace

Memorize trace

Clear memory

AutoMemorize

Auto scale Y on all

Cascade view

Weighting

Add to Result selection

Copy graph(s)

Copy bitmap

Copy data

Copy to Mask

Add Alarm

Pointer type

Cursors

Style

Dual

Cursor Link

Link all cursors in one click

Waterfall link

Navigation menu

Search