Sound Power Manual - Revision history

Lmagimel at 09:09, 26 November 2024

2024-11-26T09:09:27Z

← Older revision		Revision as of 11:09, 26 November 2024
Line 1:		Line 1:
			[[category:WikiOros]]
	The Sound Power Level generated from a source is the value used to quantify its sound emission properties. Because this result should be comparable from one test place to another, the measurement should be created following a particular test procedure. This procedure is defined by international standards, which are selected depending principally on the source type, the test environment, and the accuracy required. The OROS SOUND POWER Solution has been designed to let you achieve that type of test in the most efficient and accurate way.		The Sound Power Level generated from a source is the value used to quantify its sound emission properties. Because this result should be comparable from one test place to another, the measurement should be created following a particular test procedure. This procedure is defined by international standards, which are selected depending principally on the source type, the test environment, and the accuracy required. The OROS SOUND POWER Solution has been designed to let you achieve that type of test in the most efficient and accurate way.

Lmagimel: /* Fill out and generate a report */

2020-06-30T07:10:52Z

Fill out and generate a report

← Older revision		Revision as of 09:10, 30 June 2020
Line 579:		Line 579:
	Fill out your report before printing in order to find all the information about the weather conditions, user name and the many other features.		Fill out your report before printing in order to find all the information about the weather conditions, user name and the many other features.

	1. When the measurement is finished, click on the [[Image:SOUND_POWER_65.png~~\|framed\|none~~]] button from the '''Measurement Panel''' in order to fill out the report like the following one:		1. When the measurement is finished, click on the [[Image:SOUND_POWER_65.png]] button from the '''Measurement Panel''' in order to fill out the report like the following one:

	[[Image:SOUND_POWER_66.png\|framed\|none]]		[[Image:SOUND_POWER_66.png\|framed\|none]]

Lmagimel: /* Fill out your report */

2020-06-30T07:10:27Z

Fill out your report

← Older revision		Revision as of 09:10, 30 June 2020
Line 307:		Line 307:
	==Report Edition==		==Report Edition==
	===Fill out your report===		===Fill out your report===
	When the measurement is finished, click on the [[Image:SOUND_POWER_41.png\|~~framed\|none~~]] button from the '''Measurement Panel''' in order to fill out the report and check the calculated results, such as Sound power (dB and dBA), etc.		When the measurement is finished, click on the [[Image:SOUND_POWER_41.png\|SOUND_POWER_41.png]] button from the '''Measurement Panel''' in order to fill out the report and check the calculated results, such as Sound power (dB and dBA), etc.

	You have three tabs containing fields that you can fill out (double click on a cell to get the field) in order to make your report properly:		You have three tabs containing fields that you can fill out (double click on a cell to get the field) in order to make your report properly:

Lmagimel: /* Fill out your report */

2020-06-30T07:10:13Z

Fill out your report

← Older revision		Revision as of 09:10, 30 June 2020
Line 316:		Line 316:

	Specify the file name and click on '''Save'''.		Specify the file name and click on '''Save'''.

	~~See how to [file://mk:@MSITStore:C:\OROS%20PROGS\SoundPower\Getting%20started%20with%20Sound%20Power.chm::/Report_definition/Report_preview.htm view the report...]~~

	~~See also [file://mk:@MSITStore:C:\OROS%20PROGS\SoundPower\Getting%20started%20with%20Sound%20Power.chm::/Report_customization.htm Report information]~~

	===Results===		===Results===

Lmagimel: /* Standard conformity */

2020-06-30T07:07:08Z

Standard conformity

← Older revision		Revision as of 09:07, 30 June 2020
Line 123:		Line 123:

	There are three methods to define the K1 correction factor (Manual, File or Measurement).		There are three methods to define the K1 correction factor (Manual, File or Measurement).


	======K1 manual determination======		======K1 manual determination======
Line 129:		Line 128:

	The Standard requirements are for user information (given by the selected standard).		The Standard requirements are for user information (given by the selected standard).

	[[Image:Sp_corrections_02.png\|framed\|none]]		[[Image:Sp_corrections_02.png\|framed\|none]]

Line 136:		Line 134:

	[[Image:Sp_corrections_03.png\|framed\|none]]		[[Image:Sp_corrections_03.png\|framed\|none]]



Line 162:		Line 159:

	[[Image:Sp_corrections_06.png\|framed\|none]]		[[Image:Sp_corrections_06.png\|framed\|none]]



	You have two possibilities to do the Measurement:		You have two possibilities to do the Measurement:
Line 178:		Line 173:

	'''Position by position correction mode:''' each source position in relation to its background noise equivalent.		'''Position by position correction mode:''' each source position in relation to its background noise equivalent.




	=====K2 correction=====		=====K2 correction=====
Line 188:		Line 180:

	The File and Manual methods are explained in the K1 topic.		The File and Manual methods are explained in the K1 topic.



	======K2 Approached method determination======		======K2 Approached method determination======

Lmagimel: /* K3 correction */

2020-06-30T07:06:36Z

K3 correction

← Older revision		Revision as of 09:06, 30 June 2020
Line 225:		Line 225:
	This type of correction is an additional correction.		This type of correction is an additional correction.

	There are two methods to define the K3 correction factor (File or Manual). The File and Manual methods are explained in the ~~[file://mk:@MSITStore:C:\OROS%20PROGS\SoundPower\Getting%20started%20with%20Sound%20Power.chm::/K1_correction.htm~~ K1 ~~correction]~~ topic.		There are two methods to define the K3 correction factor (File or Manual). The File and Manual methods are explained in the K1 topic.

	====Repeatability====		====Repeatability====

Lmagimel: /* K1 manual determination */

2020-06-30T07:05:59Z

K1 manual determination

← Older revision		Revision as of 09:05, 30 June 2020
Line 137:		Line 137:
	[[Image:Sp_corrections_03.png\|framed\|none]]		[[Image:Sp_corrections_03.png\|framed\|none]]

	~~[[Image:Sp_corrections_01.png]]~~

	'''K1 file determination'''		'''K1 file determination'''

Lmagimel: /* Standard conformity */

2020-06-30T07:04:29Z

Standard conformity

@@ Line 122: / Line 122: @@
 This type of correction is about the background noise.
-There are three methods to define the K1 correction factor (Manual, File or Measurement). Click on the method you want know more about.
+There are three methods to define the K1 correction factor (Manual, File or Measurement).
 =====K2 correction=====
 This type of correction is about the measurement environment.
-There are five methods to define the K2 correction factor (Approached method, File, Manual, Reference source or RT 60). Click on the method you want know more about.
+There are five methods to define the K2 correction factor (Approached method, File, Manual, Reference source or RT 60).
 =====K3 correction=====

LDesmet: English edits

2020-06-29T21:16:15Z

English edits

← Older revision		Revision as of 23:16, 29 June 2020
Line 1:		Line 1:
	The Sound Power Level generated from a source is the value used to quantify its sound emission properties. Because this result should be comparable from one test place to another, the measurement should be ~~realized~~ following a particular test procedure. This procedure is defined by international standards, which are selected depending principally on the source type, the test environment, and the accuracy required. The OROS SOUND POWER Solution has been designed to let you achieve that type of test in the most efficient and accurate way.		The Sound Power Level generated from a source is the value used to quantify its sound emission properties. Because this result should be comparable from one test place to another, the measurement should be created following a particular test procedure. This procedure is defined by international standards, which are selected depending principally on the source type, the test environment, and the accuracy required. The OROS SOUND POWER Solution has been designed to let you achieve that type of test in the most efficient and accurate way.

	The "getting started" on-line help explains in detail the three main steps:		The "getting started" on-line help explains in detail the three main steps:

AmberSmith at 20:59, 29 June 2020

2020-06-29T20:59:22Z

Show changes