NVGate Software overview - Revision history

Lmagimel at 09:50, 26 November 2024

2024-11-26T09:50:06Z

← Older revision		Revision as of 11:50, 26 November 2024
Line 1:		Line 1:
	[[category:NVGate]]		[[category:NVGate]]
			[[category:WikiOros]]
	=====Starting the analyser and NVGate=====		=====Starting the analyser and NVGate=====
	First of all, connect your analyser to the computer and power it on. Then double-click on the NVGate Icon from your desktop. The connection dialog appears. Select operation mode (Connected, Office or multi-instruments).<br>		First of all, connect your analyser to the computer and power it on. Then double-click on the NVGate Icon from your desktop. The connection dialog appears. Select operation mode (Connected, Office or multi-instruments).<br>

Lmagimel at 07:34, 4 April 2022

2022-04-04T07:34:22Z

← Older revision		Revision as of 09:34, 4 April 2022
Line 65:		Line 65:

	=====Displaying the FFT analysis=====		=====Displaying the FFT analysis=====
	We will now display the [[NVGate FFT ~~Analyzer~~\|average spectrum]] for the two inputs :		We will now display the [[NVGate FFT\|average spectrum]] for the two inputs :

	[[Image:AddingFFT.png\|500px]]<br>		[[Image:AddingFFT.png\|500px]]<br>
Line 82:		Line 82:
	[[Image:ModSettingFFT.png\|500px]]<br>		[[Image:ModSettingFFT.png\|500px]]<br>

	You can then press ''OK'' to close this window. For details about the parameters, please visit the [[NVGate FFT ~~Analyzer~~]] page.		You can then press ''OK'' to close this window. For details about the parameters, please visit the [[NVGate FFT]] page.

	=====Adding Order Profile=====		=====Adding Order Profile=====

Lmagimel: /* Starting the analyser and NVGate */

2022-01-10T09:26:14Z

Starting the analyser and NVGate

← Older revision		Revision as of 11:26, 10 January 2022
Line 10:		Line 10:
	The NVGate splash screen will automatically appears.		The NVGate splash screen will automatically appears.

	[[Image:~~NVGateStartImg~~.png\|framed\|none]]		[[Image:splascreen2.png\|framed\|none]]

	=====Open/create a project=====		=====Open/create a project=====

Lmagimel: /* Conclusion */

2022-01-10T07:39:30Z

Conclusion

← Older revision		Revision as of 09:39, 10 January 2022
Line 147:		Line 147:

	The [[NVGate_Ribbons:_Home_Tab\|home tab]], let you a quick access to all this settings, and more! :		The [[NVGate_Ribbons:_Home_Tab\|home tab]], let you a quick access to all this settings, and more! :

	[[File:home3.PNG\|800px]]		[[File:home3.PNG\|800px]]

Lmagimel: /* Adding Order Profile */

2022-01-07T15:14:52Z

Adding Order Profile

← Older revision		Revision as of 17:14, 7 January 2022
Line 85:		Line 85:

	=====Adding Order Profile=====		=====Adding Order Profile=====
	We can now setup and display the order profile. To do this, select the ''[[NVGate Synchronous Order Analysis\|Sync. order 1]]'' tab of the ''[[~~NVGate_Software_overview~~#Step_2_Show_results\|Result]]'' window.		We can now setup and display the order profile. To do this, select the ''[[NVGate Synchronous Order Analysis\|Sync. order 1]]'' tab of the ''[[NVGate_GoToResult#Step_2_Show_results\|Result]]'' window.

	[[Image:SOAShowResult.png\|400px\|none]]<br>		[[Image:SOAShowResult.png\|400px\|none]]<br>

Lmagimel: /* Setup the analysis */

2022-01-07T15:14:12Z

Setup the analysis

← Older revision		Revision as of 17:14, 7 January 2022
Line 57:		Line 57:
	[[Image:ClickOnResults.png\|700px\|none]]<br>		[[Image:ClickOnResults.png\|700px\|none]]<br>

	This will open the ''[[~~NVGate_Software_overview~~#Step_2_Show_results\|Results]]'' window :		This will open the ''[[NVGate_GoToResult#Step_2_Show_results\|Results]]'' window :

	[[File:Gotoresults2022.png\|500px]]		[[File:Gotoresults2022.png\|500px]]
	<br>		<br>

	This window can be called anytime from the ''[[~~NVGate_Software_overview~~#GoToResult\|GoToResult]]'' icons. See the [[NVGate_GoToResult#Step_2_Show_results\|Show result section]] for detail about this window. <br>		This window can be called anytime from the ''[[NVGate_GoToResult#GoToResult\|GoToResult]]'' icons. See the [[NVGate_GoToResult#Step_2_Show_results\|Show result section]] for detail about this window. <br>

	=====Displaying the FFT analysis=====		=====Displaying the FFT analysis=====

Lmagimel: /* Setup the analysis */

2022-01-07T15:13:10Z

Setup the analysis

← Older revision		Revision as of 17:13, 7 January 2022
Line 62:		Line 62:
	<br>		<br>

	This window can be called anytime from the ''[[NVGate_Software_overview#GoToResult\|GoToResult]]'' icons. See the [[~~NVGate_Software_overview~~#Step_2_Show_results\|Show result section]] for detail about this window. <br>		This window can be called anytime from the ''[[NVGate_Software_overview#GoToResult\|GoToResult]]'' icons. See the [[NVGate_GoToResult#Step_2_Show_results\|Show result section]] for detail about this window. <br>

	=====Displaying the FFT analysis=====		=====Displaying the FFT analysis=====

Lmagimel: /* Select the inputs */

2022-01-07T15:12:51Z

Select the inputs

← Older revision		Revision as of 17:12, 7 January 2022
Line 43:		Line 43:
	To add the inputs into the [[NVGate Recorder\|recorder]], check the ''Record signals'' box :		To add the inputs into the [[NVGate Recorder\|recorder]], check the ''Record signals'' box :
	[[Image:CheckRecorder.png\|700px\|none]]<br>		[[Image:CheckRecorder.png\|700px\|none]]<br>
	By doing this, any inputs (even if added later) will automatically be connected to the [[NVGate Recorder\|recorder plug-in~~]]. This box is also available from the [[NVGate_Software_overview#Record_signals\|NVGate Ribbon~~]].		By doing this, any inputs (even if added later) will automatically be connected to the [[NVGate Recorder\|recorder plug-in]].

	=====Edit the Sampling Rate=====		=====Edit the Sampling Rate=====

Lmagimel: /* Select the inputs */

2022-01-07T15:12:10Z

Select the inputs

← Older revision		Revision as of 17:12, 7 January 2022
Line 35:		Line 35:
	[[Image:InputEmpty.png\|700px\|none]]<br>		[[Image:InputEmpty.png\|700px\|none]]<br>

	This window can be called anytime from the ''[[~~NVGate_Software_overview#GoToResult~~\|GoToResult]]''. See [[~~NVGate_Software_overview~~#Step_1:_Inputs_selection\|Input selection]] for the detail of the parameters.<br><br>		This window can be called anytime from the ''[[NVGate_GoToResult\|GoToResult]]''. See [[NVGate_GoToResult#Step_1:_Inputs_selection\|Input selection]] for the detail of the parameters.<br><br>

	As we use 2 accelerometers, select check the "Acceleration" boxes for inputs 1 and 2, and select the appropriate sensors in the "Transducer" column for each inputs. If you don't see your specific sensors, please fill your [[NVGate Transducer and Calibration\|transducer database]].		As we use 2 accelerometers, select check the "Acceleration" boxes for inputs 1 and 2, and select the appropriate sensors in the "Transducer" column for each inputs. If you don't see your specific sensors, please fill your [[NVGate Transducer and Calibration\|transducer database]].

Lmagimel: /* Conclusion */

2022-01-07T13:45:25Z

Conclusion

← Older revision		Revision as of 15:45, 7 January 2022
Line 148:		Line 148:
	The [[NVGate_Ribbons:_Home_Tab\|home tab]], let you a quick access to all this settings, and more! :		The [[NVGate_Ribbons:_Home_Tab\|home tab]], let you a quick access to all this settings, and more! :
	[[File:home3.PNG\|800px]]		[[File:home3.PNG\|800px]]


	~~====Displays====~~
	Different windows which contain one or several graphs or traces can be created. You can also add or remove some information in the Infotrace using the Infotrace properties. Manage all the display settings using the right click on almost any area. For each result type there are different available options using the right click.

	~~[[Image:Usersmanual_165.jpg\|700px\|none]]~~

	~~=====Multi-graphs windows=====~~
	A graph is the area where traces are displayed. A multi-graph window contains several graphs which display signal from the same source or plug-in analyzer. The graphs can be displayed with different physical quantities.

	~~=====Multi-traces=====~~
	~~You can display several traces in the same graph. You can also display in multi-trace 3D mode.~~

	~~Multi-traces display is not available for Waterfall displays.~~

	~~The trace represents a signal or a result.~~

	~~=====Cursors=====~~
	~~The cursor is displayed when cursor mode is selected: Used to move the cursor by left clicking and dragging.~~

	~~Select [[Image:Usersmanual_166.png]]from the Measurement tab in the Graphs group in order to activate the cursor mode.~~

	~~=====Markers=====~~

	~~[[Image:Usersmanual_10.png\|framed\|none]]~~

	~~Select a type of marker from the Display/Graphs tab in the Markers group in order to activate the marker mode.~~

	~~To add a marker on a graph, double click on the graph. Obtain information about a trace by using the marker table.~~

	~~=====Scales=====~~
	~~The scale displays the magnitude and the grid of the graph.~~

	~~=====Infotrace=====~~
	~~Displays information about the graph:~~

	~~'''Graph mode''': magnitude, real…~~

	'''List of traces with their status''': available or not/displayed in all areas or not/not displayed. You can move into the ''infotrace'' to select a specific trace and to follow cursor<nowiki>’</nowiki>s value of this trace. Memorized traces are also displayed in the list.

	* '''Overall levels''': displays the RMS level in 2D windows containing spectra or time signals
	* '''Cursor information''': x,y, order, dx, dy if available
	* Marker arrays
	~~Using keyboard arrow up/down, you can select the active trace in the ''infotrace''.~~


	~~----~~

← Older revision		Revision as of 17:12, 7 January 2022
Line 35:		Line 35:
	[[Image:InputEmpty.png\|700px\|none]]<br>		[[Image:InputEmpty.png\|700px\|none]]<br>

	This window can be called anytime from the ''[[~~NVGate_Software_overview#GoToResult~~\|GoToResult]]''. See [[~~NVGate_Software_overview~~#Step_1:_Inputs_selection\|Input selection]] for the detail of the parameters.<br><br>		This window can be called anytime from the ''[[NVGate_GoToResult\|GoToResult]]''. See [[NVGate_GoToResult#Step_1:_Inputs_selection\|Input selection]] for the detail of the parameters.<br><br>

	As we use 2 accelerometers, select check the "Acceleration" boxes for inputs 1 and 2, and select the appropriate sensors in the "Transducer" column for each inputs. If you don't see your specific sensors, please fill your [[NVGate Transducer and Calibration\|transducer database]].		As we use 2 accelerometers, select check the "Acceleration" boxes for inputs 1 and 2, and select the appropriate sensors in the "Transducer" column for each inputs. If you don't see your specific sensors, please fill your [[NVGate Transducer and Calibration\|transducer database]].