NVGate Ribbons: Home - Revision history

Lmagimel at 09:01, 26 November 2024

2024-11-26T09:01:51Z

← Older revision		Revision as of 11:01, 26 November 2024
Line 1:		Line 1:
			[[category:WikiOros]]
	==Go to result group==		==Go to result group==

Credaelli: /* Measurement group */

2022-01-06T17:45:32Z

Measurement group

← Older revision		Revision as of 19:45, 6 January 2022
Line 88:		Line 88:
	\|-valign = "top"		\|-valign = "top"
	\|[[File:Home_stop_2022.PNG\|20px]]		\|[[File:Home_stop_2022.PNG\|20px]]
	\| '''Stop''': (CTRL+S) ~~Stops~~ all the current analyses and recording. After requesting a stop, the plug-ins finish their current block. When all the plug-ins have switched to Stop the analyzer switches to the Stopped status		\| '''Stop''': (CTRL+S) Stop all the current analyses and recording. After requesting a stop, the plug-ins finish their current block. When all the plug-ins have switched to Stop the analyzer switches to the Stopped status
	''Note: The analyzed results and recorded signal are saved when the analyzer switch to stop. This is the default behavior. It may be changed from the user preferences.''		''Note: The analyzed results and recorded signal are saved when the analyzer switch to stop. This is the default behavior. It may be changed from the user preferences.''

Credaelli: /* Disk group */

2022-01-06T17:44:06Z

Disk group

← Older revision		Revision as of 19:44, 6 January 2022
Line 282:		Line 282:
	\|-valign = "top"		\|-valign = "top"
	\|[[File:Home_record_2022.PNG\|right\|150px]]		\|[[File:Home_record_2022.PNG\|right\|150px]]
	\| '''Record''': ~~Displays~~ and ~~enables~~ selecting where the recording is performed (analyzer's disk or computer disk) or to stop temporarily the recording (off).		\| '''Record''': Display and enable selecting where the recording is performed (analyzer's disk or computer disk) or to stop temporarily the recording (off).
	\|-valign = "top"		\|-valign = "top"
	\|[[File:used_space_2022.PNG\|right\|150px]]		\|[[File:used_space_2022.PNG\|right\|150px]]
	\| '''Used space''': ~~Gives~~ a visual overview of the space available on the disk.		\| '''Used space''': Give a visual overview of the space available on the disk.

	\|-valign = "top"		\|-valign = "top"
	\|[[File:Download_2022.PNG\|right\|30px]]		\|[[File:Download_2022.PNG\|right\|30px]]
	\| '''Download''': ~~Opens~~ the ''Mobi-Disk manager'' dialog, which lists the signals available on the analyzer's disk and enables selecting the signals to be downloaded on the pc.		\| '''Download''': Open the ''Mobi-Disk manager'' dialog, which lists the signals available on the analyzer's disk and enables selecting the signals to be downloaded on the pc.

	\|}<br clear="all">		\|}<br clear="all">

Credaelli: /* Data group */

2022-01-06T17:43:56Z

Data group

← Older revision		Revision as of 19:43, 6 January 2022
Line 260:		Line 260:
	\|-valign="top"		\|-valign="top"
	\|[[File:home_attachment_2022.PNG\|30px]]		\|[[File:home_attachment_2022.PNG\|30px]]
	\| '''Attachment''': ~~Enables~~ to quickly identify if files (reports, pictures, videos....) are attached to the current project. ''Note: if the "Default project" is active, the Attachment button is greyed.		\| '''Attachment''': Enable to quickly identify if files (reports, pictures, videos....) are attached to the current project. ''Note: if the "Default project" is active, the Attachment button is greyed.
	{\|border="0" cellspacing="0" cellpadding="4" width="50%" align="left"		{\|border="0" cellspacing="0" cellpadding="4" width="50%" align="left"
	\|-		\|-
Line 272:		Line 272:
	\|-		\|-
	\|[[File:Home_filter_projects_2022.PNG\|30px]]		\|[[File:Home_filter_projects_2022.PNG\|30px]]
	\| '''Filter projects''': ~~Opens~~ the ''Filter Project'' dialog, which enables selecting the projects to be visible in the ''Project manager''.		\| '''Filter projects''': Open the ''Filter Project'' dialog, which enables selecting the projects to be visible in the ''Project manager''.
	\|}<br clear="all">		\|}<br clear="all">

Credaelli: /* Setup group */

2022-01-06T17:43:35Z

Setup group

← Older revision		Revision as of 19:43, 6 January 2022
Line 237:		Line 237:
	\|-		\|-
	\|[[File:Home_load_setup_2022.PNG\|right\|30px]]		\|[[File:Home_load_setup_2022.PNG\|right\|30px]]
	\| '''Load setup''': ~~Opens~~ the ''Load setup'' dialog, which allows loading setups from Models, Measurements and Projects or creating setups for online or post-analysis.		\| '''Load setup''': Open the ''Load setup'' dialog, which allows loading setups from Models, Measurements and Projects or creating setups for online or post-analysis.

	\|-		\|-
	\|[[File:Home_save_as_model_2022.PNG\|right\|30px]]		\|[[File:Home_save_as_model_2022.PNG\|right\|30px]]
	\| '''Save as model''': ~~Enables~~ to save the current setup as a Model.		\| '''Save as model''': Enable to save the current setup as a Model.
	\|-		\|-
	\|[[File:Home_active_model_2022.PNG\|right\|100px]]		\|[[File:Home_active_model_2022.PNG\|right\|100px]]
	\| '''Active model''': ~~Displays~~ the name of the loaded Model. This Model will remain active until a ''Reset setup'' is applied or another setup is loaded.		\| '''Active model''': Display the name of the loaded Model. This Model will remain active until a ''Reset setup'' is applied or another setup is loaded.

	\|-		\|-
	\|[[File:Home_reset_2022.PNG\|right\|30px]]		\|[[File:Home_reset_2022.PNG\|right\|30px]]
	\| '''Reset''': ~~Closes~~ the active Model and set all parameters to the default values.		\| '''Reset''': Close the active Model and set all parameters to the default values.

	\|}<br clear="all">		\|}<br clear="all">

Credaelli: /* Save measurement */

2022-01-06T17:39:22Z

Save measurement

← Older revision		Revision as of 19:39, 6 January 2022
Line 110:		Line 110:

	===Save measurement===		===Save measurement===
			Enables to save the results of a measurement. The results can be saved if:

			* There is at least one result selected in the save selection,
			* The analyzer is stopped,
			* The results exists.

			By default the save measurement displays the following confirmation window:

			[[File:Save_measurement_dialog_2022.JPG\|500px]]

			The ''Save Measurement ''dialog shows the visible properties with their suggested value.

			This dialog box allows entering:

			* the measurement name to identify your data
			* An associated keyword that allows filtering the project manager
			* User<nowiki>’</nowiki>s comments (Use the CTRL<nowiki>+</nowiki>Enter to add lines)
			In Addition, the measurement can be informed with properties which are used to help retrieving the files and their meaning.

			The properties are attached to the measurement and filled while saving the data or by editing the properties from the project manager. The properties belong to 3 different categories:

			* The OROS properties are automatically filled by NVGate: Date, Author, Protection, Project name, Signal location and Number and type of saved results.
			* The OROS user properties are already created by NVGate. Their values, but must be filled by the operator: Comments, Site, Installation, Intervention, UUT, Serial number, Measurement type and Default type
			* The Users parameters are created and filled by the operator while saving or by editing the properties. Ex: ''TestCampaign'', ''R&DProject'' or ''Customer name''. Users parameters can be predefined from the ribbon: ''Measurement/Preferences/Measurement Properties''
			Note that ''users<nowiki>’</nowiki> properties will pollinate''. It means the new properties type will be automatically added on the future measurements. The same occurs if you import or copy a measurement which contains unknown users<nowiki>’</nowiki> properties.

			The OROS User properties easily cover a wide range of situations. Properties options are:

			* Site is for the location of the measurement. It can be a ship, a test track, a test cell, an aircraft or a factory.
			* Installation is for the tested machinery. It can be a diesel engine, a car, a jet engine, a pump, a machine tool, etc…
			* Intervention describes the type of acquisition/analysis: qualification, overhaul check, prototyping, diagnostic, routine data collection, first run, etc…
			* Unit Under Test (UUT) indicates precisely which part is tested: a tire, a bearing, a transmission, etc…
			* Measurement type: Describes the type of measuring; Acoustic, diagnostic, rotating, etc..
			* Default (or Defect): The identified defect on the UUT.

			Managing properties

			To enter the property values, click on the right cell of the corresponding line and add text.

			To remove a property from the measurement, use the cross on the right side of the corresponding line.

			To add a property fill the bottom left cell with the property name and use the tab or click on the right cell to enter its value.

			By right clicking on the property line you can hide it or change the suggestion mode. In order to save your entered values from one measurement to the next one, select ''Same as previous. '' ''Same as today'' will reset the suggestion as soon as the date of the latest saved measurement is different from current day.

			''Note: Measurement<nowiki>’</nowiki>s properties can be edited from the ''Project Manager'' by right clicking on the desired measurement.''

	===Save option===		===Save option===

Credaelli: /* Post-analysis mode */

2022-01-06T17:31:08Z

Post-analysis mode

← Older revision		Revision as of 19:31, 6 January 2022
Line 59:		Line 59:
	\|-		\|-
	\|[[File:Home_select_signals_2022.PNG\|30px]]		\|[[File:Home_select_signals_2022.PNG\|30px]]
	\| '''Select signal''': ~~Opens~~ the ''Select signal'' dialog to select the signal to be post-analyzed.		\| '''Select signal''': Open the ''Select signal'' dialog to select the signal to be post-analyzed.

	\|-		\|-
	\|[[File:Home_select_tracks_2022.PNG\|30px]]		\|[[File:Home_select_tracks_2022.PNG\|30px]]
	\| '''Select tracks''': ~~Opens~~ the ''Inputs'' table showing the inputs definition of the signal to be post-analyzed.		\| '''Select tracks''': Open the ''Inputs'' table showing the inputs definition of the signal to be post-analyzed.

	\|}<br clear="all">		\|}<br clear="all">

Credaelli: /* Online mode */

2022-01-06T17:29:21Z

Online mode

← Older revision		Revision as of 19:29, 6 January 2022
Line 7:		Line 7:
	\|-valign = "top"		\|-valign = "top"
	\|[[File:Home_start_2022.PNG\|30px]]		\|[[File:Home_start_2022.PNG\|30px]]
	\| '''Start...''': Opens the ''NVGate start'' dialog which is dedicated to make the first steps in the software. The ''NVGate start'' dialog is also displayed at each NVGate Start except if the user checks the option ''Do not show again'' in the dialog.		\| '''Start...''': Opens the ''NVGate start'' dialog which is dedicated to make the first steps in the software.
			''Note: The ''NVGate start'' dialog is also displayed at each NVGate Start except if the user checks the option ''Do not show again'' in the dialog.''

	[[File:NVGate_start_dialog_2022.JPG\|400px]]		[[File:NVGate_start_dialog_2022.JPG\|400px]]

	{\|border="0" cellspacing="0" cellpadding="4" width="~~100~~%" align="~~center~~"		{\|border="0" cellspacing="0" cellpadding="4" width="30%" align="left"
	\|-valign = "top"		\|-valign = "top"
	\|[[File:Open_project_2022.JPG\|30px]]		\|[[File:Open_project_2022.JPG\|30px]]
	\| '''Open project''': Opens the NVGate ''Start'' dialog which is dedicated to make the first steps in the software. The ''Start'' dialog is also displayed at each NVGate Start except if the user deactivates the option in the bottom left of the dialog.		\| '''Open project''': Open an existing project.

	\|-valign = "top"		\|-valign = "top"
	\|[[File:New_project_2022.JPG\|30px]]		\|[[File:New_project_2022.JPG\|30px]]
	\| '''New project''': ~~Opens the NVGate ''Start~~'' ~~dialog which is dedicated to make the first steps in the software. The~~ ''~~Start~~'' ~~dialog is also displayed at each NVGate Start except if the user deactivates the option in the bottom left of the dialog~~.		\| '''New project''': Create a new project.

			\|-valign = "top"
			\|
			\| '''Recent projects''': Recently opened projects.

	\|}<br clear="all">		\|}<br clear="all">

Credaelli: /* Online mode */

2022-01-06T17:24:33Z

Online mode

← Older revision		Revision as of 19:24, 6 January 2022
Line 8:		Line 8:
	\|[[File:Home_start_2022.PNG\|30px]]		\|[[File:Home_start_2022.PNG\|30px]]
	\| '''Start...''': Opens the ''NVGate start'' dialog which is dedicated to make the first steps in the software. The ''NVGate start'' dialog is also displayed at each NVGate Start except if the user checks the option ''Do not show again'' in the dialog.		\| '''Start...''': Opens the ''NVGate start'' dialog which is dedicated to make the first steps in the software. The ''NVGate start'' dialog is also displayed at each NVGate Start except if the user checks the option ''Do not show again'' in the dialog.

			[[File:NVGate_start_dialog_2022.JPG\|400px]]

	{\|border="0" cellspacing="0" cellpadding="4" width="100%" align="center"		{\|border="0" cellspacing="0" cellpadding="4" width="100%" align="center"
	\|-valign = "top"		\|-valign = "top"
	\|[[File:~~Home_start_2022~~.~~PNG~~\|30px]]		\|[[File:Open_project_2022.JPG\|30px]]
	\| '''Open project''': Opens the NVGate ''Start'' dialog which is dedicated to make the first steps in the software. The ''Start'' dialog is also displayed at each NVGate Start except if the user deactivates the option in the bottom left of the dialog.		\| '''Open project''': Opens the NVGate ''Start'' dialog which is dedicated to make the first steps in the software. The ''Start'' dialog is also displayed at each NVGate Start except if the user deactivates the option in the bottom left of the dialog.

	\|-valign = "top"		\|-valign = "top"
	\|[[File:~~Home_start_2022~~.~~PNG~~\|30px]]		\|[[File:New_project_2022.JPG\|30px]]
	\| '''New project''': Opens the NVGate ''Start'' dialog which is dedicated to make the first steps in the software. The ''Start'' dialog is also displayed at each NVGate Start except if the user deactivates the option in the bottom left of the dialog.		\| '''New project''': Opens the NVGate ''Start'' dialog which is dedicated to make the first steps in the software. The ''Start'' dialog is also displayed at each NVGate Start except if the user deactivates the option in the bottom left of the dialog.

Credaelli: /* Save group */

2022-01-06T17:15:35Z

Save group

← Older revision		Revision as of 19:15, 6 January 2022
Line 100:		Line 100:
	\|-valign = "top"		\|-valign = "top"
	\|[[File:Home_save_option_2022.PNG\|30px]]		\|[[File:Home_save_option_2022.PNG\|30px]]
	\| '''Save option''': ~~Defines~~ the way the results and signals are saved. It opens the ''Save setup'' dialog which contains 2 tabs.		\| '''Save option''': Define the way the results and signals are saved.

			===Save measurement===

			===Save option===
			Define the way the results and signals are saved. It opens the ''Save setup'' dialog which contains 2 tabs.

			====Save setup tab====
	[[File:Save_setup_2022.JPG\|700px]]		[[File:Save_setup_2022.JPG\|700px]]

Line 113:		Line 120:
	* ''Auto-increment:'' Used to insure the new measurement has a unique name.		* ''Auto-increment:'' Used to insure the new measurement has a unique name.

	{\|border="2" cellspacing="0" cellpadding="4" width="100%"		{\|class="wikitable" style="background:white" border="0" cellspacing="0" cellpadding="4" width="100%" align="center"
	\|''Number''		\|''Number''
	\|Adds a number to the Base name. The first available increment is used		\|Adds a number to the Base name. The first available increment is used
Line 125:		Line 132:
	* ''Save option'': This option determines the way in which the measurement will be created when the analyzer stops		* ''Save option'': This option determines the way in which the measurement will be created when the analyzer stops

	{\|border="2" cellspacing="0" cellpadding="4" width="100%"		{\|class="wikitable" style="background:white" border="0" cellspacing="0" cellpadding="4" width="100%" align="center"
	\|''Do not save''		\|''Do not save''
	\|No measurement will be created. The only way to save the results selected is to perform the Save Result command manually		\|No measurement will be created. The only way to save the results selected is to perform the Save Result command manually
Line 151:		Line 158:
	These results can be only saved manually.		These results can be only saved manually.

	~~<u>''~~Save selection tab~~:''</u>~~		====Save selection tab====

	[[File:Save_selection_2022.JPG\|700px]]		[[File:Save_selection_2022.JPG\|700px]]
Line 168:		Line 175:
	List of traces available in the project coming from current analysis results and working results.		List of traces available in the project coming from current analysis results and working results.

	* [[Image:Reports_Tools_Ribbons_288.png]] '''Save measurement:''' Save the result.
	~~The result can be saved when:~~

	* There is at least one result selected in the save selection,
	* The analyzer is stopped
	* The results exists

	~~By default the save measurement displays the following confirmation window.~~


	\|}<br clear="all">		\|}<br clear="all">