NVGate Mask And Alarm - Revision history

Lmagimel at 09:47, 26 November 2024

2024-11-26T09:47:25Z

← Older revision		Revision as of 11:47, 26 November 2024
Line 1:		Line 1:
	[[category:NVGate]]		[[category:NVGate]]
			[[category:WikiOros]]
	The Masks (also called ''Mask'') are used to compare a measured result with a template.		The Masks (also called ''Mask'') are used to compare a measured result with a template.
	===Tutorial===		===Tutorial===

Lmagimel at 07:35, 4 April 2022

2022-04-04T07:35:49Z

← Older revision		Revision as of 09:35, 4 April 2022
Line 2:		Line 2:
	The Masks (also called ''Mask'') are used to compare a measured result with a template.		The Masks (also called ''Mask'') are used to compare a measured result with a template.
	===Tutorial===		===Tutorial===
	Here is an example of a template plotted over the [[NVGate FFT ~~Analyzer~~\|FFT spectrum]] for three inputs. <br>		Here is an example of a template plotted over the [[NVGate FFT\|FFT spectrum]] for three inputs. <br>

	[[Image:Mask4.png\|700px\|none]]		[[Image:Mask4.png\|700px\|none]]

	This tutorial will show you how to use a mask and an alarm to start the recording of 3 inputs when the FFT spectrum of the first input crosses the mask. To do that, we will need a to use a mask, an alarm and [[NVGate Macro\|a macro]]. The setup must contain three input channels [[NVGate_Software_overview#Step_1:_Inputs_selection\|connected]] to [[NVGate_Recorder\|the recorder]] and the [[NVGate FFT ~~Analyzer~~\|FFT plugins]]. The average spectrum must be displayed. The starting event of the recorder must be set on "Manual Trigger".<br>		This tutorial will show you how to use a mask and an alarm to start the recording of 3 inputs when the FFT spectrum of the first input crosses the mask. To do that, we will need a to use a mask, an alarm and [[NVGate Macro\|a macro]]. The setup must contain three input channels [[NVGate_Software_overview#Step_1:_Inputs_selection\|connected]] to [[NVGate_Recorder\|the recorder]] and the [[NVGate FFT\|FFT plugins]]. The average spectrum must be displayed. The starting event of the recorder must be set on "Manual Trigger".<br>


Line 23:		Line 23:
	[[Image:Point2.png\|framed\|none]]		[[Image:Point2.png\|framed\|none]]

	Once you close the window, the mask is then created under the project in the [[NVGate Project manager\|project manager]] and can be dropped into the result graph, here the [[NVGate FFT ~~Analyzer~~\|FFT spectrum]] :		Once you close the window, the mask is then created under the project in the [[NVGate Project manager\|project manager]] and can be dropped into the result graph, here the [[NVGate FFT\|FFT spectrum]] :
	[[Image:Mask+manager2.png\|600px\|none]]		[[Image:Mask+manager2.png\|600px\|none]]

Credaelli: /* Frequency narrow band mask settings */

2022-01-07T14:50:02Z

Frequency narrow band mask settings

← Older revision		Revision as of 16:50, 7 January 2022
Line 202:		Line 202:
	=====Frequency narrow band mask settings=====		=====Frequency narrow band mask settings=====

	[[Image:Reports_Tools_Ribbons_174.png\|~~framed~~\|none]]		[[Image:Reports_Tools_Ribbons_174.png\|400px\|none]]

	======Frequencies======		======Frequencies======

Credaelli: /* Add an Alarm */

2022-01-07T14:49:30Z

Add an Alarm

← Older revision		Revision as of 16:49, 7 January 2022
Line 29:		Line 29:
	Once you added the mask on the graph, you can create an alarm. The alarm will then allow you to use as an event in a [[NVGate Macro\|Macro]]. <br>		Once you added the mask on the graph, you can create an alarm. The alarm will then allow you to use as an event in a [[NVGate Macro\|Macro]]. <br>
	To create the alarm, select "Add Alarm" from the [[NVGate Ribbons overview\|NVGate ribbon]] :		To create the alarm, select "Add Alarm" from the [[NVGate Ribbons overview\|NVGate ribbon]] :
	[[~~Image~~:~~AddAlarm~~.~~png~~\|700px\|none]]		[[File:Alarm_new_2022.JPG\|700px\|none]]

	Then, in the next window, create the alarm between the mask and the selected curves :		Then, in the next window, create the alarm between the mask and the selected curves :

Credaelli: /* Setup a mask */

2022-01-07T14:47:37Z

Setup a mask

← Older revision		Revision as of 16:47, 7 January 2022
Line 11:		Line 11:
	====Setup a mask====		====Setup a mask====

	The Mask ~~manager~~ can be found in the "[[NVGate_Ribbons:_Automation\|Automation]]" tab of the [[NVGate Ribbons overview\|NVGate Ribbon]] :		The Mask group can be found in the "[[NVGate_Ribbons:_Automation\|Automation]]" tab of the [[NVGate Ribbons overview\|NVGate Ribbon]].

	~~[[Image:Ribbon~~.~~png\|700px\|none]]~~

	To create a new mask, select "New" :		To create a new mask, select "New" :

	[[~~Image~~:~~New~~.~~png~~\|700px\|none]]		[[File:Mask_new_2022.JPG\|700px\|none]]

	And set the parameters of your mask :		And set the parameters of your mask :

Credaelli: /* Setup a mask */

2022-01-07T14:45:38Z

Setup a mask

← Older revision		Revision as of 16:45, 7 January 2022
Line 11:		Line 11:
	====Setup a mask====		====Setup a mask====

	The Mask manager can be found in the "[[~~NVGate Ribbons~~: ~~Tools Tab~~\|~~Tools~~]]" tab of the [[NVGate Ribbons overview\|NVGate Ribbon]] :		The Mask manager can be found in the "[[NVGate_Ribbons:_Automation\|Automation]]" tab of the [[NVGate Ribbons overview\|NVGate Ribbon]] :

	[[Image:Ribbon.png\|700px\|none]]		[[Image:Ribbon.png\|700px\|none]]

Credaelli at 14:44, 7 January 2022

2022-01-07T14:44:07Z

← Older revision		Revision as of 16:44, 7 January 2022
Line 351:		Line 351:

	The values used in the Excel® sheet must be specified in the current units.		The values used in the Excel® sheet must be specified in the current units.

	~~===Alarm parameters===~~
	~~=====Manage alarms=====~~
	~~[[Image:Reports_Tools_Ribbons_159.png\|framed\|none]]~~

	~~Opens a dialog box displaying the list of available alarms~~

	~~[[Image:Reports_Tools_Ribbons_160.png\|framed\|none]]~~

	~~Select an alarm and click the remove button [[Image:Reports_Tools_Ribbons_161.jpg]] to remove the alarm.~~

	~~=====Add Alarm=====~~
	~~[[Image:Reports_Tools_Ribbons_162.png\|framed\|none]]~~

	Create a new comparison alarm in the active a graphic window. Disabled if the window does not contain a template result and a result coming from a plug-in.		Create a new comparison alarm in the active a graphic window. Disabled if the window does not contain a template result and a result coming from a plug-in.

Credaelli: /* Masks Group */

2022-01-07T14:43:28Z

Masks Group

@@ Line 78: / Line 78: @@
 * Frequency narrow band (available if one or more FFT plug-in analyzer is available)
 * Order narrow band (available if one or more synchronous order analysis plug-in analyzer is available)
 |}<br clear="all">

Credaelli: /* Setup a mask */

2022-01-07T14:38:14Z

Setup a mask

← Older revision		Revision as of 16:38, 7 January 2022
Line 21:		Line 21:
	And set the parameters of your mask :		And set the parameters of your mask :

	[[Image:Setup.png\|~~framed~~\|none]]		[[Image:Setup.png\|350px\|none]]
	You can then draw the template by adding points with the mouse and adapt the coordinates in the info-trace :		You can then draw the template by adding points with the mouse and adapt the coordinates in the info-trace :
	[[Image:Point2.png\|framed\|none]]		[[Image:Point2.png\|framed\|none]]

Credaelli: /* Mask Parameters */

2022-01-07T14:35:59Z

Mask Parameters

← Older revision		Revision as of 16:35, 7 January 2022
Line 47:		Line 47:
	You can now run the measurement and start the [[NVGate Macro\|the Macro]]: the recording of the signal will began only if the spectrum of the first input crosses the mask template.		You can now run the measurement and start the [[NVGate Macro\|the Macro]]: the recording of the signal will began only if the spectrum of the first input crosses the mask template.

	===~~Mask Parameters~~===		===Masks Group===
	~~=====Manage=====~~
	~~[[Image:Reports_Tools_Ribbons_156.png\|framed\|none]]~~

	~~Opens the Mask manager and displays the list of masks classified by project~~		[[File:Masks_group_2022.JPG\|200px]]

	[[Image:~~Reports_Tools_Ribbons_28~~.png\|~~framed~~\|none]]		{\|border="0" cellspacing="0" cellpadding="4" width="100%" align="center"
			\|-
	* New: ~~Creates a new mask in~~ the ~~project selected in~~ the list~~. The "Masks settings" dialog box is displayed, in order to define~~ masks ~~characteristics.~~		\|[[Image:Reports_Tools_Ribbons_156.png\|30px\|none]]
	~~Disabled if a template is already being edited.~~		\|'''Manage:''' Opens the Mask manager and displays the list of masks classified by project

	* Edit: ~~Edits~~ the mask ~~selected~~ in the ~~list.~~		\|-
	~~See "Frequency narrow band mask settings" topic p 56~~.		\|[[Image:Reports_Tools_Ribbons_157.png\|20px\|none]]
			\|'''Save:''' Saves the mask loaded in the editor in the current project.

	* Rename: Renames the mask selected in the list.		\|-
	* Delete: Deletes the template selected in the list.		\|[[Image:Reports_Tools_Ribbons_158.png\|20px\|none]]
	~~=====Save=====~~		\|'''Save As:''' Saves the mask with a new name in the current project.
	[[Image:~~Reports_Tools_Ribbons_157~~.png]]: Saves the mask ~~loaded in the editor~~ in the current project.

	=~~====Save As=====~~		\|-valign = "top"
	[[Image:~~Reports_Tools_Ribbons_158~~.png]]~~: Saves the mask with a new name in the current project.~~		\|[[Image:Reports_Tools_Ribbons_163.png\|20px\|none]]
			\|'''New:''' Creates a new mask. The "Masks settings" dialog box is displayed, in order to define masks characteristics.
	~~=====~~New~~=====~~
	~~[[Image:Reports_Tools_Ribbons_163.png]]~~: Creates a new mask. The "Masks settings" dialog box is displayed, in order to define masks characteristics.

	Disabled if a template is already edited.		Disabled if a template is already edited.
Line 82:		Line 78:
	* Frequency narrow band (available if one or more FFT plug-in analyzer is available)		* Frequency narrow band (available if one or more FFT plug-in analyzer is available)
	* Order narrow band (available if one or more synchronous order analysis plug-in analyzer is available)		* Order narrow band (available if one or more synchronous order analysis plug-in analyzer is available)
	====Mask settings====		\|}<br clear="all">
	=====1/n octave mask settings=====
			===Mask Manager===

			[[Image:Reports_Tools_Ribbons_28.png\|framed\|none]]

			*'''New:''' Creates a new mask in the project selected in the list. The "Masks settings" dialog box is displayed, in order to define masks characteristics.
			Disabled if a template is already being edited.

			*'''Edit:''' Edits the mask selected in the list.
			See "Frequency narrow band mask settings" topic p 56.

			*'''Rename:''' Renames the mask selected in the list.
			*'''Delete:''' Deletes the template selected in the list.

			===Mask settings===
			====1/n octave mask settings====

	[[Image:Reports_Tools_Ribbons_164.png\|framed\|none]]		[[Image:Reports_Tools_Ribbons_164.png\|framed\|none]]

	======Central frequencies======		=====Central frequencies=====
	* Min: Minimum value on X-axis.		* Min: Minimum value on X-axis.
	* Max: Maximum value on X-axis.		* Max: Maximum value on X-axis.
Line 99:		Line 110:
	* 1/24<sup>th</sup> octave		* 1/24<sup>th</sup> octave

	======Y axis======		=====Y axis=====
	* Min: Minimum value on Y-axis.		* Min: Minimum value on Y-axis.
	* Max: Maximum value on Y-axis.		* Max: Maximum value on Y-axis.
	* Physical quantity: Physical quantity represented on Y-axis.		* Physical quantity: Physical quantity represented on Y-axis.

	=====1/n octave mask editor=====		====1/n octave mask editor====

	[[Image:Reports_Tools_Ribbons_165.png\|framed\|none]]		[[Image:Reports_Tools_Ribbons_165.png\|framed\|none]]

← Older revision		Revision as of 09:35, 4 April 2022
Line 2:		Line 2:
	The Masks (also called ''Mask'') are used to compare a measured result with a template.		The Masks (also called ''Mask'') are used to compare a measured result with a template.
	===Tutorial===		===Tutorial===
	Here is an example of a template plotted over the [[NVGate FFT ~~Analyzer~~\|FFT spectrum]] for three inputs. <br>		Here is an example of a template plotted over the [[NVGate FFT\|FFT spectrum]] for three inputs. <br>

	[[Image:Mask4.png\|700px\|none]]		[[Image:Mask4.png\|700px\|none]]

	This tutorial will show you how to use a mask and an alarm to start the recording of 3 inputs when the FFT spectrum of the first input crosses the mask. To do that, we will need a to use a mask, an alarm and [[NVGate Macro\|a macro]]. The setup must contain three input channels [[NVGate_Software_overview#Step_1:_Inputs_selection\|connected]] to [[NVGate_Recorder\|the recorder]] and the [[NVGate FFT ~~Analyzer~~\|FFT plugins]]. The average spectrum must be displayed. The starting event of the recorder must be set on "Manual Trigger".<br>		This tutorial will show you how to use a mask and an alarm to start the recording of 3 inputs when the FFT spectrum of the first input crosses the mask. To do that, we will need a to use a mask, an alarm and [[NVGate Macro\|a macro]]. The setup must contain three input channels [[NVGate_Software_overview#Step_1:_Inputs_selection\|connected]] to [[NVGate_Recorder\|the recorder]] and the [[NVGate FFT\|FFT plugins]]. The average spectrum must be displayed. The starting event of the recorder must be set on "Manual Trigger".<br>


Line 23:		Line 23:
	[[Image:Point2.png\|framed\|none]]		[[Image:Point2.png\|framed\|none]]

	Once you close the window, the mask is then created under the project in the [[NVGate Project manager\|project manager]] and can be dropped into the result graph, here the [[NVGate FFT ~~Analyzer~~\|FFT spectrum]] :		Once you close the window, the mask is then created under the project in the [[NVGate Project manager\|project manager]] and can be dropped into the result graph, here the [[NVGate FFT\|FFT spectrum]] :
	[[Image:Mask+manager2.png\|600px\|none]]		[[Image:Mask+manager2.png\|600px\|none]]