NVGate Analyzer Setting Browser (ASB) - Revision history

Lmagimel at 08:58, 26 November 2024

2024-11-26T08:58:21Z

← Older revision		Revision as of 10:58, 26 November 2024
Line 1:		Line 1:
			[[category:WikiOros]]
	==ASB (Analyzer Setting Browser)==		==ASB (Analyzer Setting Browser)==
	[[File:ASB.png\|right]]		[[File:ASB.png\|right]]

LDesmet: English edits

2020-05-27T19:19:48Z

English edits

Lmagimel: /* From the setting */

2020-05-12T13:03:00Z

From the setting

← Older revision		Revision as of 15:03, 12 May 2020
Line 89:		Line 89:
	====From the setting====		====From the setting====
	The fourth access level is available by right clicking on the setting itself (Label, Duration, Transducer, Coupling...) and '''Properties,''' where the new value for this setting can be entered.		The fourth access level is available by right clicking on the setting itself (Label, Duration, Transducer, Coupling...) and '''Properties,''' where the new value for this setting can be entered.


	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_29.png\|framed\|none]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_29.png\|framed\|none]]


	===Contextual menu===		===Contextual menu===

Lmagimel: /* Copy/Paste setting between plug-ins */

2020-05-12T13:02:46Z

Copy/Paste setting between plug-ins

← Older revision		Revision as of 15:02, 12 May 2020
Line 128:		Line 128:
	For example you can see the same signal in the time domain and in the spectral domain, with exactly the same settings (for instance resolution). In the following example, the FFT1 have been set in the <nowiki>’</nowiki>Spectral domain<nowiki>’</nowiki>, with a specific range and a resolution. For the FFT2, right click on FFT2 and paste the setting from FFT1, then you have just to change the domain from spectral to time in that case.		For example you can see the same signal in the time domain and in the spectral domain, with exactly the same settings (for instance resolution). In the following example, the FFT1 have been set in the <nowiki>’</nowiki>Spectral domain<nowiki>’</nowiki>, with a specific range and a resolution. For the FFT2, right click on FFT2 and paste the setting from FFT1, then you have just to change the domain from spectral to time in that case.
	You can compare the signal in, exactly, the same conditions.		You can compare the signal in, exactly, the same conditions.


	==ASB User preference==		==ASB User preference==

Lmagimel at 13:02, 12 May 2020

2020-05-12T13:02:05Z

@@ Line 41: / Line 41: @@
 '''Considerations for post-processing''' :  If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.
 ==Controls==
@@ Line 136: / Line 111: @@
 * '''Auto width''': this function adjusts the width of the ASB.
-=====Plug-in analyzer status=====
+==Plug-in analyzer status==
 An icon is displayed in the ASB when a plug-in is connected. For each plug-in the icon displays the analysis status (running, stopped, recording...).
 * '''Running '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_30.png]]: the plug-in analyzer is processing the data acquisition.
@@ Line 146: / Line 121: @@
 * '''Failure '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_36.png]]: the plug-in analyzer has failed (the analyzer is no longer able to compute the data acquisition; a warning message will appear)
-=====Copy/Paste setting between plug-ins=====
+==Copy/Paste setting between plug-ins==
 By right clicking on any settings of the ASB you can Copy values of settings, and then Paste it anywhere else. There is an automatic type matching, which allows pasting only value of the same settings (using the IDN number).
@@ Line 153: / Line 128: @@
 For example you can see the same signal in the time domain and in the spectral domain, with exactly the same settings (for instance resolution). In the following example, the FFT1 have been set in the <nowiki>’</nowiki>Spectral domain<nowiki>’</nowiki>, with a specific range and a resolution. For the FFT2, right click on FFT2 and paste the setting from FFT1, then you have just to change the domain from spectral to time in that case.
 You can compare the signal in, exactly, the same conditions.

Lmagimel at 13:00, 12 May 2020

2020-05-12T13:00:47Z

← Older revision		Revision as of 15:00, 12 May 2020
Line 1:		Line 1:
	===ASB (Analyzer Setting Browser)===		==ASB (Analyzer Setting Browser)==
	[[File:ASB.png\|right]]		[[File:ASB.png\|right]]

Line 41:		Line 41:
	'''Considerations for post-processing''' : If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.		'''Considerations for post-processing''' : If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.

	====ASB User preference====		==ASB User preference==
	NVGate provides specialized modes that enable dedicated functionalities related to the application. By selecting specialized mode functionalities such as;		NVGate provides specialized modes that enable dedicated functionalities related to the application. By selecting specialized mode functionalities such as;
	By selecting specialized mode functionalities such as;		By selecting specialized mode functionalities such as;
Line 67:		Line 67:
	'''Note''': these specialized modes can be selected (by default) in the user<nowiki>’</nowiki>s preferences.		'''Note''': these specialized modes can be selected (by default) in the user<nowiki>’</nowiki>s preferences.

	====Controls====		==Controls==
	This section explains how to access the different controls contained in the ASB (settings, custom display...) and what they mean.		This section explains how to access the different controls contained in the ASB (settings, custom display...) and what they mean.
	=====Access=====		===Access===
	There are 4 way to access a setting:		There are 4 way to access a setting:

	======From the module======		====From the module====
	The first access level is available by right clicking on a module (Front-end, Recorder, Tachometer, FFT...) and '''Properties''' where all the settings contained in this module can be adjusted.		The first access level is available by right clicking on a module (Front-end, Recorder, Tachometer, FFT...) and '''Properties''' where all the settings contained in this module can be adjusted.

	======From the collection======		====From the collection====
	The second access level is available by right clicking on a collection (Inputs, Outputs, Channels, Tracks...) and '''Properties''' where all the settings contained in this collection can be adjusted.		The second access level is available by right clicking on a collection (Inputs, Outputs, Channels, Tracks...) and '''Properties''' where all the settings contained in this collection can be adjusted.

Line 82:		Line 82:
	It is also possible to copy and paste some items from a cell, a line, a column or a group of cell to another if they have compatible titles (Label, Transducer, Sensitivity…).		It is also possible to copy and paste some items from a cell, a line, a column or a group of cell to another if they have compatible titles (Label, Transducer, Sensitivity…).

	======Copy/paste Front-end tables======		=====Copy/paste Front-end tables=====
	Taking advantages from the Excel capabilities for tables<nowiki>’</nowiki> creation and updating, NVGate V8.30 offers now to update the front-end/player tracks from Excel table.		Taking advantages from the Excel capabilities for tables<nowiki>’</nowiki> creation and updating, NVGate V8.30 offers now to update the front-end/player tracks from Excel table.

Line 107:		Line 107:
	* Ignore and keep the current one if not acceptable (ex: unknown coupling)		* Ignore and keep the current one if not acceptable (ex: unknown coupling)

	======From the sub-module======		====From the sub-module====
	The third access level is available by right clicking on a sub-module (Input x, Output x, Track x, Channel x...) and '''Properties,''' where all the settings contained in this sub-module can be adjusted.		The third access level is available by right clicking on a sub-module (Input x, Output x, Track x, Channel x...) and '''Properties,''' where all the settings contained in this sub-module can be adjusted.
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_04.png\|framed\|none]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_04.png\|framed\|none]]


	======From the setting======		====From the setting====
	The fourth access level is available by right clicking on the setting itself (Label, Duration, Transducer, Coupling...) and '''Properties,''' where the new value for this setting can be entered.		The fourth access level is available by right clicking on the setting itself (Label, Duration, Transducer, Coupling...) and '''Properties,''' where the new value for this setting can be entered.

Line 119:		Line 119:


	=====Contextual menu=====		===Contextual menu===
	Contextual menus appear when right clicking on an area or an item.		Contextual menus appear when right clicking on an area or an item.
	======On an item======		======On an item======

Lmagimel at 12:58, 12 May 2020

2020-05-12T12:58:43Z

← Older revision		Revision as of 14:58, 12 May 2020
Line 1:		Line 1:
	===ASB (Analyzer Setting Browser)===		===ASB (Analyzer Setting Browser)===
	[[File:ASB.png]]		[[File:ASB.png\|right]]

	The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.		The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.

Lmagimel: /* Plug-in analyzer status */

2020-05-12T12:58:07Z

Plug-in analyzer status

← Older revision		Revision as of 14:58, 12 May 2020
Line 138:		Line 138:
	=====Plug-in analyzer status=====		=====Plug-in analyzer status=====
	An icon is displayed in the ASB when a plug-in is connected. For each plug-in the icon displays the analysis status (running, stopped, recording...).		An icon is displayed in the ASB when a plug-in is connected. For each plug-in the icon displays the analysis status (running, stopped, recording...).
	* '''Running '''		* '''Running '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_30.png]]: the plug-in analyzer is processing the data acquisition.
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_30.png~~\|framed\|none~~]]		* '''Paused '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_31.png]]: the plug-in analyzer is paused. The plug-in analyzer is not processing any data. The user must click on the "continue" button to continue the analysis. For the recorder plug-in the "Continue" action starts a new record because in the paused state no data is recorded.
	: the plug-in analyzer is processing the data acquisition.		* '''Stopped'''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_32.png]]: the plug-in analyzer is stopped.
	* '''Paused '''		* '''Recording'''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_33.png]]: the plug-in recorder is processing the data acquisition.
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_31.png~~\|framed\|none~~]]		* '''Block Triggering'''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_34.png]]: the plug-in analyzer is waiting for the Trigger event to occur in order to process the data.
	: the plug-in analyzer is paused. The plug-in analyzer is not processing any data. The user must click on the "continue" button to continue the analysis. For the recorder plug-in the "Continue" action starts a new record because in the paused state no data is recorded.		* '''Waiting'''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_35.png]]: in the manual rejection mode, the plug-in analyzer is waiting for the user to accept or to reject the current analyzed signal block.
	* '''Stopped'''		* '''Failure '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_36.png]]: the plug-in analyzer has failed (the analyzer is no longer able to compute the data acquisition; a warning message will appear)
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_32.png~~\|framed\|none~~]]
	: the plug-in analyzer is stopped.
	* '''Recording'''
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_33.png~~\|framed\|none~~]]
	: the plug-in recorder is processing the data acquisition.
	* '''Block Triggering'''
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_34.png~~\|framed\|none~~]]
	: the plug-in analyzer is waiting for the Trigger event to occur in order to process the data.
	* '''Waiting'''
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_35.png~~\|framed\|none~~]]
	: in the manual rejection mode, the plug-in analyzer is waiting for the user to accept or to reject the current analyzed signal block.
	* '''Failure '''
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_36.png~~\|framed\|none~~]]
	: the plug-in analyzer has failed (the analyzer is no longer able to compute the data acquisition; a warning message will appear)
	=====Copy/Paste setting between plug-ins=====		=====Copy/Paste setting between plug-ins=====
	By right clicking on any settings of the ASB you can Copy values of settings, and then Paste it anywhere else. There is an automatic type matching, which allows pasting only value of the same settings (using the IDN number).		By right clicking on any settings of the ASB you can Copy values of settings, and then Paste it anywhere else. There is an automatic type matching, which allows pasting only value of the same settings (using the IDN number).

Lmagimel at 12:56, 12 May 2020

2020-05-12T12:56:24Z

Lmagimel at 12:55, 12 May 2020

2020-05-12T12:55:42Z

← Older revision		Revision as of 14:55, 12 May 2020
Line 10:		Line 10:
	The main entries of the ASB consist of modules corresponding to the main analyzer functions.		The main entries of the ASB consist of modules corresponding to the main analyzer functions.

	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_10.png]] The '''sources''' that acquire, store and play-back signals
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_10.png]]		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_11.png]] The '''resources''' that provide events, filters, weighting windows, and tachometers to the plug-in analyzers
	The '''sources''' that acquire, store and play-back signals		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_12.png]] The '''plug-in''' analyzers that process independent analysis modes
	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_13.png]] The '''Waterfall''' that synchronizes the results computed by the plug-ins.
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_11.png]]
	The '''resources''' that provide events, filters, weighting windows, and tachometers to the plug-in analyzers
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_12.png]]
	The '''plug-in''' analyzers that process independent analysis modes
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_13.png]]
	The '''Waterfall''' that synchronizes the results computed by the plug-ins
	The ASB has a maximum depth of 3 levels: module, sub-module, and settings. In the case of multiple similar sub-modules (inputs for example), the sub-modules are arranged in collections.		The ASB has a maximum depth of 3 levels: module, sub-module, and settings. In the case of multiple similar sub-modules (inputs for example), the sub-modules are arranged in collections.

	For each module, this document provides an array that summarizes the available results with detailed information.		For each module, this document provides an array that summarizes the available results with detailed information.
	<u>The sub-modules:</u>		<u>The sub-modules:</u>
	The modules contain the function and their setting functions.		The modules contain the function and their setting functions.

	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_14.png]] Sub-module = a function
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_14.png]]		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_15.png]] Inputs = incoming signals measured from the front-end
	Sub-module = a function		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_16.png]] Outputs = signals generated from the hardware
	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_17.png]] Collection = A set of identical sub-modules (e.g; inputs, channels, events, ect..)
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_15.png]]
	Inputs = incoming signals measured from the front-end
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_16.png]]
	Outputs = signals generated from the hardware
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_17.png]]
	Collection = A set of identical sub-modules (e.g; inputs, channels, events, ect..)
	<u>The Settings:</u>		<u>The Settings:</u>

	The settings are the function<nowiki>’</nowiki>s parameters. There are multiple type of settings identified by specific icons:		The settings are the function<nowiki>’</nowiki>s parameters. There are multiple type of settings identified by specific icons:

	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_18.png]] A scalar (integer or real) boundaries are displayed in the tooltip
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_18.png]]		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_19.png]] A list: the setting is one of the list items. Note: the list content may vary with the current configuration.
	A scalar (integer or real) boundaries are displayed in the tooltip		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_20.png]] A text e.g; the label of channel
	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_21.png]] A signal. Usually a file containing signal(s)
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_19.png]]		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_22.png]] A check box. (e.g; mute/un-mute generator)
	A list: the setting is one of the list items. Note: the list content may vary with the current configuration.		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_23.png]] An action. Temporary information. (e.g; a user event trigger)
	*		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_24.png]] Special: multi-parameter setting (e.g; The tach ratio)
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_20.png]]		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_25.png]] Special: graphical multi-parameter setting (e.g; force/response weighting windows)
	A text e.g; the label of channel
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_21.png]]
	A signal. Usually a file containing signal(s)
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_22.png]]
	A check box. (e.g; mute/un-mute generator)
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_23.png]]
	An action. Temporary information. (e.g; a user event trigger)
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_24.png]]
	Special: multi-parameter setting (e.g; The tach ratio)
	*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_25.png]]
	Special: graphical multi-parameter setting (e.g; force/response weighting windows)
	'''Note: ''' A setting may be informative, i.e, it is not possible to modify it. In such case an I is displayed close to the icon:		'''Note: ''' A setting may be informative, i.e, it is not possible to modify it. In such case an I is displayed close to the icon:
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]

← Older revision		Revision as of 21:19, 27 May 2020
Line 4:		Line 4:
	The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.		The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.

	The ASB is designed to offer ~~an exhaustive~~ access to ~~the~~ analyzer settings. The standard access to the analyzer setup ~~is offered in~~ a more intuitive ~~and simpler way with the~~ general Vision interface (see Chapter 6)		The ASB is designed to offer access to all analyzer settings. The standard access to the analyzer setup offers a simplified and more intuitive general Vision interface (see Chapter 6).
	<u>The Modules:</u>		<u>The Modules:</u>
	The main entries of the ASB consist of modules corresponding to the main analyzer functions.		The main entries of the ASB consist of modules corresponding to the main analyzer functions.

	* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_10.png]] The '''sources''' that acquire, store and play-back signals		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_10.png]] The '''sources''' that acquire, store and play-back signals.
	* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_11.png]] The '''resources''' that provide events, filters, weighting windows, and tachometers to the plug-in analyzers		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_11.png]] The '''resources''' that provide events, filters, weighting windows, and tachometers to the plug-in analyzers.
	* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_12.png]] The '''plug-in''' analyzers that process independent analysis modes		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_12.png]] The '''plug-in''' analyzers that process independent analysis modes.
	* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_13.png]] The '''Waterfall''' that synchronizes the results computed by the plug-ins.		* [[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_13.png]] The '''Waterfall''' that synchronizes the results computed by the plug-ins.
	The ASB has a maximum depth of 3 levels: module, sub-module, and settings. In the case of multiple similar sub-modules (inputs for example), the sub-modules are arranged in collections.		The ASB has a maximum depth of 3 levels: module, sub-module, and settings. In the case of multiple similar sub-modules (inputs for example), the sub-modules are arranged in collections.
Line 37:		Line 37:
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]

	'''Note''': ~~settings~~ may be hidden or visible depending on the current configuration.		'''Note''': Settings may be hidden or visible depending on the current configuration.

	'''Considerations for post-processing''' : If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.		'''Considerations for post-processing''' : If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.
Line 97:		Line 97:
	Different controls are available according to the item you right click on.		Different controls are available according to the item you right click on.
	* '''Properties:''' displays the properties of the item.		* '''Properties:''' displays the properties of the item.
	* '''Add/Remove: '''Available for collections (Channels, Event...), it enables or disables some items of the collection		* '''Add/Remove: '''Available for collections (Channels, Event...), it enables or disables some items of the collection.
	* '''Set to default''': Reset a setting, a sub-module or a module to the default values. All connections are removed		* '''Set to default''': Reset a setting, a sub-module or a module to the default values. All connections are removed.
	* '''Copy (Ctrl<nowiki>+</nowiki>C)''': Copy a setting, a sub-module, or a module. This copy is internal and does not use the Clipboard		* '''Copy (Ctrl<nowiki>+</nowiki>C)''': Copy a setting, a sub-module, or a module. This copy is internal and does not use the Clipboard.
	* '''Paste (Ctrl<nowiki>+</nowiki>V)''': Available when a copy action has been previously performed. Only the settings common to both the copy and the paste item are affected		* '''Paste (Ctrl<nowiki>+</nowiki>V)''': Available when a copy action has been previously performed. Only the settings common to both the copy and the paste item are affected.
	* '''IDN ''''''info: '''Available only when the Shift key is pressed. It displays an identification number used by NVDrive<sup></sup>		* '''IDN ''''''info: '''Available only when the Shift key is pressed. It displays an identification number used by NVDrive.<sup></sup>
	* '''View state''': Available only on plug-ins, it hides or shows the status of this plug-in in the Status window		* '''View state''': Available only on plug-ins, it hides or shows the status of this plug-in in the Status window.
	* '''Add to control panel''': Enable the corresponding setting to be modified from the Control Panel.		* '''Add to control panel''': Enable the corresponding setting to be modified from the Control Panel.
	* '''dB''': Enable the corresponding setting to be displayed in dB. Only available for some scalar settings.		* '''dB''': Enable the corresponding setting to be displayed in dB. Only available for some scalar settings.

	======On ASB background======		======On ASB background======
	* '''Auto width''': ~~this~~ function adjusts the width of the ASB.		* '''Auto width''': This function adjusts the width of the ASB.

	==Plug-in analyzer status==		==Plug-in analyzer status==
Line 119:		Line 119:
	* '''Failure '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_36.png]]: the plug-in analyzer has failed (the analyzer is no longer able to compute the data acquisition; a warning message will appear)		* '''Failure '''[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_36.png]]: the plug-in analyzer has failed (the analyzer is no longer able to compute the data acquisition; a warning message will appear)

	==Copy/Paste ~~setting~~ between plug-ins==		==Copy/Paste settings between plug-ins==
	By right clicking on any settings of the ASB you can Copy values of settings, and then Paste it anywhere else. There is an automatic type matching, which allows pasting only value of the same settings (using the IDN number).		By right clicking on any settings of the ASB you can Copy values of settings, and then Paste it anywhere else. There is an automatic type matching, which allows pasting only value of the same settings (using the IDN number).

	This Copy/Paste is available at each level of the ASB. This ~~let you the opportunity of the~~ multi-analysis in the same condition.		This Copy/Paste is available at each level of the ASB. This allows for multi-analysis on the same condition.

	For example you can see the same signal in the time domain and in the spectral domain, with exactly the same settings (for instance resolution). In the following example, the FFT1 have been set in the <nowiki>’</nowiki>Spectral domain<nowiki>’</nowiki>, with a specific range and a resolution. For the FFT2, right click on FFT2 and paste the setting from FFT1, then you have just to change the domain from spectral to time in that case.		For example, you can see the same signal in the time domain and in the spectral domain, with exactly the same settings (for instance resolution). In the following example, the FFT1 have been set in the <nowiki>’</nowiki>Spectral domain<nowiki>’</nowiki>, with a specific range and a resolution. For the FFT2, right click on FFT2 and paste the setting from FFT1, then you have just to change the domain from spectral to time in that case.
	You can compare the signal in, exactly, the same conditions.		You can compare the signal in, exactly, the same conditions.

	==ASB User preference==		==ASB User preference==
	NVGate provides specialized modes that enable dedicated functionalities related to the application. By selecting specialized mode functionalities such as;		NVGate provides specialized modes that enable dedicated functionalities related to the application. You can enable them by selecting specialized mode functionalities such as:
	~~By selecting specialized mode functionalities such as;~~
	* Availability of results		* Availability of results
	* Settings		* Settings
	* User ~~preference,~~		* User preferences
	~~will be enabled.~~ Unselecting specialized mode will mask these functionalities. There are 2 specialized modes:		Unselecting specialized mode will mask these functionalities. There are 2 specialized modes:

	* '''Structural mode''': this mode is dedicated to the acquisition of modal data through hammer acquisition or signals provided by up to 6 shakers. The following topics are available when structural mode is active:		* '''Structural mode''': this mode is dedicated to the acquisition of modal data through hammer acquisition or signals provided by up to 6 shakers. The following topics are available when structural mode is active:
Line 151:		Line 150:
	* Plug-in analysis <nowiki>’</nowiki>Sync Order<nowiki>’</nowiki> will be unlocked.		* Plug-in analysis <nowiki>’</nowiki>Sync Order<nowiki>’</nowiki> will be unlocked.

	'''Note''': ~~these~~ specialized modes can be selected (by default) in the user<nowiki>’</nowiki>s preferences.		'''Note''': These specialized modes can be selected (by default) in the user<nowiki>’</nowiki>s preferences.

← Older revision		Revision as of 14:56, 12 May 2020
Line 1:		Line 1:
	===ASB (Analyzer Setting Browser)===		===ASB (Analyzer Setting Browser)===
	[[File:ASB.png]]		[[File:ASB.png]]


	The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.		The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.


	The ASB is designed to offer an exhaustive access to the analyzer settings. The standard access to the analyzer setup is offered in a more intuitive and simpler way with the general Vision interface (see Chapter 6)		The ASB is designed to offer an exhaustive access to the analyzer settings. The standard access to the analyzer setup is offered in a more intuitive and simpler way with the general Vision interface (see Chapter 6)
Line 38:		Line 36:
	'''Note: ''' A setting may be informative, i.e, it is not possible to modify it. In such case an I is displayed close to the icon:		'''Note: ''' A setting may be informative, i.e, it is not possible to modify it. In such case an I is displayed close to the icon:
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]


	'''Note''': settings may be hidden or visible depending on the current configuration.		'''Note''': settings may be hidden or visible depending on the current configuration.


	'''Considerations for post-processing''' : If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.		'''Considerations for post-processing''' : If the time signal is recorded on the PC or on the Mobi-Disk<sup>™</sup>, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.
Line 60:		Line 56:
	*		*
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_03.png\|framed\|none]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_03.png\|framed\|none]]


	Availability of accept/reject in the bottom right:		Availability of accept/reject in the bottom right:
Line 82:		Line 77:
	======From the collection======		======From the collection======
	The second access level is available by right clicking on a collection (Inputs, Outputs, Channels, Tracks...) and '''Properties''' where all the settings contained in this collection can be adjusted.		The second access level is available by right clicking on a collection (Inputs, Outputs, Channels, Tracks...) and '''Properties''' where all the settings contained in this collection can be adjusted.


	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_27.png\|framed\|none]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_27.png\|framed\|none]]


	It is also possible to copy and paste some items from a cell, a line, a column or a group of cell to another if they have compatible titles (Label, Transducer, Sensitivity…).		It is also possible to copy and paste some items from a cell, a line, a column or a group of cell to another if they have compatible titles (Label, Transducer, Sensitivity…).
Line 93:		Line 86:

	This feature uses the Windows® clipboard.		This feature uses the Windows® clipboard.


	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_28.png\|framed\|none]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_28.png\|framed\|none]]
Line 114:		Line 106:
	* Adjust it to the closest upper value if it is possible (ex: max range)		* Adjust it to the closest upper value if it is possible (ex: max range)
	* Ignore and keep the current one if not acceptable (ex: unknown coupling)		* Ignore and keep the current one if not acceptable (ex: unknown coupling)




	======From the sub-module======		======From the sub-module======




	The third access level is available by right clicking on a sub-module (Input x, Output x, Track x, Channel x...) and '''Properties,''' where all the settings contained in this sub-module can be adjusted.		The third access level is available by right clicking on a sub-module (Input x, Output x, Track x, Channel x...) and '''Properties,''' where all the settings contained in this sub-module can be adjusted.
	[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_04.png\|framed\|none]]		[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_04.png\|framed\|none]]